AKKO 3061 BT5.0 61 Keys Wireless Mechanical Keyboard User Manual

AKKO 3061 BT5.0 61 Keys Wireless Mechanical Keyboard

3061 Technical Specifications

3061 HotKeys

3061 System Commands

• Lock Windows Key Press Fn and left Win key
• Restore Factory Settings Hold down left Win and right Win key for 5s

3061 Backlight Settings

Fn+

| Enter [|  | Sdwiffietcrehnbtelitgwheteinng1e8ffects Dim| In Bluetooth mode, the light is turned off by default for power saving.

Press Fn+L to turn on the light.

---|---|---|---|---
]|  |
 | =| Bright e RGB backlit color

hcanga n            ng e t

|  | in  ert i  lighti          ffec s
; :|  | Slower Animation
’”|  | Faster Animation

3061 Bluetooth Feature Overview

• Turn the switch on the back panel to “OFF” to disable Bluetooth and enable the Wired mode.
  Wired/BT Mode Switch Turn the switch on the back panel to “ON” to enable Bluetooth and disable the Wired mode.

• Pairing Bluetooth device with keyboard. The light will keep blinking during the pairing process Long Press Fn+E/R/T/Y and restore to the previous light status when pairing succeeds.

• Press Fn+E/R/T/Y Switch between Bluetooth devices. The light will blink once and restore to the previous light status when device switch succeeds.

• Charging Indicator The power indicator LED is under the spacebar. The LED turns on when keyboard is charging and turns off when keyboard is fully charged.

• Low Battery Indicator Press any key and the LED under the space bar will flash for 3 times as low battery warning.

3061 Bluetooth Setup Instruction 1

Switch to Bluetooth mode
Turn the switch on the back panel to “ON” to enable Bluetooth and disable the Wired mode.

Set the Bluetooth profile
The keyboard can memorize 4 switchable Bluetooth devices, which are saved in 4 Bluetooth profiles through short-cuts Fn+E/R/T/Y (corresponds to BT1/BT2/BT3/BT4); When you first use the keyboard, select a desired Bluetooth profile by pressing Fn+E/R/T/Y to initialize device searching ; Once it’s been setup and paired, whenever you use the keyboard again, it would memorize the last Bluetooth device it has been worked on, trying to send Bluetooth signal to communicate with the specific device.

Bluetooth Pairing
When you use your PC/ PAD/iPhone to pair with the keyboard, and the Bluetooth mode of the keyboard and PC/PAD/iPhone have all been turned on, the keyboard would show up based on the Bluetooth profile you set in step 2 such as Akko 3061-BT1 / Akko 3061-BT2 / Akko 3061-BT3 / Akko 3061-BT4.

3061 Bluetooth Setup Instruction 2

Switch the Bluetooth device
After 4 Bluetooth devices have been paired with the keyboard, long press Fn+E / Fn+R / Fn+T / Fn+Y for at
least 3 seconds to quickly switch between them.

Shut off the keyboard
Turn the power off on the keyboard back panel while unused for power saving;
If the keyboard remains unused for over 10 mins, it would go to sleep mode and you can activate it by pressing any key.
Note: The battery saver mode for Windows system would affect/delay the sleep activation time of the keyboard.

Reset the keyboard
If you forgot the specific paired front-end device or if there remains disorder in Bluetooth connection and communication, you can press Fn + ~ to reset the keyboard. This action erases all pairing information stored
in your keyboard.

Akko Macro V1.0 Macro Setup Instruction 1

1. Akko Macro V1.0 is hardware-based and works without software-driven.
2. The following keys cannot be programmed: “Esc”, “Fn” ， “Left Wing”, and “Right Wing”.
3. Akko Macro V1.0 does not support simultaneous trigger, that is, pressing “AB” at the same time will trigger the two keys in the order of A followed by B.
4. Akko Macro V1.0 does not support customized interval time, that is, the trigger interval between key A and key B cannot be defined and will follow the system’s default trigger time.

Akko Macro V1.0 Macro Setup Instruction 2

Clear Macro：
If a key has been defined, after entering the Macro editor, you can press “FN + the key” to clear its definition.
If you want to re-customize that key, press “FN + the key”again to start the new Macro recording after clearing its old definition.

Akko Macro V1.0Macro Setup Instruction 3

Macro Recording Example: Define “A” as “AKKOGEAR”

• Step 1: Press Fn + right Win for 3 seconds to enter the Macro mode.

• Step 2: Press Fn + ESC to launch Macro editor.

• Step 3: Press Fn + A. This means we choose key “A” to record.

• Step 4: Press A, K, K, O, G, E, A, R in order as replacement definition of “A”.

• Step 5: Press Fn + A again to end the Macro recording of key “A”.
  At this point, pressing “A” in notepad will display “AKKOGEAR”. If you want to create a Macro for key “B”, press Fn + B to start the Macro recording.

• Step 6: Press Fn + Esc to exit Macro editor. Under the Macro mode, you can configure the keys and Macros you set.

• Step 7: Press and hold Fn + Left Win for 3 seconds to exit the Macro mode and return to the default key definition.

Akko Macro V1.0 Calling Macros

• Method A:
  Enter the Macro mode by long-pressing Fn+left Win. Then all keys will turn to pre-configured definitions with locked Win key. Press Fn+Win to unlock Win key if necessary. In the Macro mode, you can use keys with customized definitions.
  Note, every time you reboot or re-plugged the cable of the keyboard, the Macro mode will be turned off by default and all keys will return to default definitions until you re-enter the Macro mode.

• Method B:
  Under the default key definition, you can also quickly call the customized content of specific keys through “Fn+right Alt+the key that has been defined through Macro”. Note that you must first press Fn and then press Alt to call the Macro.

Akko Warranty and Service Statement

1. Akko provides 1-yr warranty for customers in mainland China. For other regions, please contact your seller (Akko distributor) for specific warranty policy.
2. If the warranty window expires, customers need to pay for repairs. Akko will also provide instructions if users prefer to repair the keyboard by themselves. However, users shall take full responsibility for any loss happened during self-repair.
3. Dissembling the keyboard without the manufacturer/seller’s instruction will immediately void the warranty.
4. The return and warranty policy may vary in different platforms and are subject to the specific distributor at the time of purchase.
   Precautions Man-made damage is not limited to immersion, falling off, and pulling off the wires with excessive forces, etc.

instagram.com/akkogear facebook.com/akkogear

References

• Akko (@akkogear) • Instagram photos and videos
• Akko艾酷官方网站 | 潮流时尚外设_Akko机械键盘官网

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>