0033401 Dual Battery Powered Soldering Station

“`html

Product Information

Specifications:

• Product Name: JBC B.IRON
• Compatibility: Android / iOS devices
• Manufacturer Website: JBC Tools

Product Usage Instructions:

App Installation and Update:

1. On your smartphone or tablet (Android / iOS), go to the App
   Store/Play Store.

2. Search for “JBC B.IRON” in the search bar.

3. Download and install the app. Internet connection is required
   for this step.

Tool Firmware Update:

1. Ensure your device has an internet connection.

2. Open the JBC app and navigate to the update section in the main
   menu.

3. Select the tool you want to update.

4. If a newer firmware version is available, tap “Update” to start
   the process.

5. The update process may take up to 10 minutes to complete.

6. Once updated, you will see a confirmation message indicating
   the tool has been successfully updated.

FAQ:

Q: How do I know if my tool firmware needs to be updated?

A: Check the update section in the JBC app. If a newer version
is available, it’s recommended to update for optimal
performance.

Q: Can I update the app without an internet connection?

A: For app updates, an internet connection is required. However,
for tool firmware updates, you can download the update file on
another device with an internet connection and then transfer it to
your device for execution.

“`

INSTRUCTION MANUAL
App & Firmware
Download & Update
B·IRON Tools

JBC Software

The app is already installed on JBC’s B·IRON Display. If another display is to be used, the app must be downloaded to the corresponding display (see chapters below).
At the moment of purchasing the B·IRON tool, the current firmware is already downloaded to the tool.
Note: Since the tool firmware is not updated automatically, updates must be carried out by the customer. To do so follow the instructions on the next page.
App Versions

If an app with version 1.6 or higher is already installed on the display (tablet or smartphone) used with B·IRON, the firmware of the tool can be updated directly without updating the app. Carry out the steps described in section “B·IRON Tool Firmware Update”.
Older app versions must be updated. If no app has been installed, it must be installed first.

App Installation
On JBC’s portable display (Android), the B·IRON app is already installed.
On the user’s smartphone or tablet (Android / iOS), go to the App Store/Play Store and search for “JBC B.IRON” on the search bar. Note: Internet connection is required to download the app.

Alternatively, scan these QR codes to access the B·IRON app page directly:

App Update
Display with Internet connection (Android / iOS)
Update the app via Google Play (Android) or the App Store (iOS).
Display without Internet connection (Android)
Download JBC’s installer program to another device with an Internet connection from JBC’s website: https://www.jbctools.com/jbcsoftware.html
Then copy the downloaded program to the internal storage of the display used with B·IRON. Access the internal storage of the display and run the downloaded program. Once the program is completed, the app will be updated to its newest version. Note: For JBC´s displays, swipe down to open the internal storage folder.
2

Downloading the Tool Firmware Update File
Display with internet connection: Download the firmware update file to the display used with B·IRON from: https://www.jbctools.com/ jbcsoftware.html. Go to the internal folder and unzip the downloaded file. Display without internet connection: Download the firmware update file to another device with an internet connection from JBC’s website: https://www.jbctools.com/jbcsoftware.html and unzip the downloaded file. Then do as described in the table.

PDS JBC’s display (android)

Other android devices

iOS devices

Copy the unzipped files on the device used with B·IRON:

Folder:
Internal shared storageAndroiddata es.infinitysource.jbc_ soldering.JBCBironfiles

Folder:
Internal shared storage Androiddatacom. jbctools.jbcbironfiles

Path:
Files > On my iPad > JBC B.iron

Executing the Tool Firmware Update File

Tool firmware be carried out

updates are by the user.

nJot BexeCcuted

automatically;

they

must

On the display you are using with the B·IRON, and the latest app version installed, access the B·IRON app:

Select he tool you want to update. Then in the main menu select “update”.
Note: At least one tool must be linked to see the expanded menu options.

JBC

Main Menu with expanded menu options
MENU Work
450 ºC
Settings
Counters
350 ºC
Update
2L5o0cºCate Tool
Documents
150 ºC
Light Theme Dark Theme
50 ºC 80%
Disconnect
JBC3

Executing the Tool Firmware Update File (continuation)

If the downloaded tool firmware update file contains a newer version than the one already installed, the current and new version are displayed (1). Tap “Update” to start the update (2).

The update process takes about 10 minutes.

1

The B·IRON status light continuously changes its color during the update process.

Once the update is completed, “Tool updated” (3) will be displayed.

2 3

If “No new version available” is displayed (4), no update is possible or required.
4

0033401-280624

References

• JBC Software

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>