TAURUS TF-PU1207HT Chin Up Bar Instruction Manual
- September 14, 2024
- taurus
Table of Contents
TAURUS TF-PU1207HT Chin Up Bar
Specifications
- Chin-up Bar Premium for wall mounting
- Various grip positions: upper grip, lower grip, parallel hand position
- Special ball grips/climbing grips for forearm muscles and grip strength
- Wide pull-up bars with two different grip diameters
- Max load : 120 kg
Assembly Instructions
- Assemble both side frames and small handles to the big handle using the provided bolts, washers, and lock nuts.
- Wall Assembly:
- Drill a hole with a minimum depth of 80mm.
- Insert the expansion screw into the hole.
- Tighten the nut to fix the bolt into the wall.
- Slide the wall support on the bolt and secure it with the nut.
General Safety Instructions
- Consult a physician before starting to ensure suitability.
- Avoid excessive training to prevent health risks.
- Not for use by children under 14 years old.
- Persons with disabilities require medical clearance and supervision.
- Equipment is for use by one person at a time.
- Avoid having anyone within the range of motion during training.
- Avoid inserting objects into the device’s openings.
Care, Maintenance, and Storage
- Clean the device with a dry soft cloth.
- Store the device in the supplied carton in a dry environment.
The Taurus chin-up bar Premium is a solid chin-up bar for wall mounting that off ers various diff erent grip positions. Upper grip, lower grip or parallel hand position – the chin-up bar off ers all grip variations, as well as special ball grips/climbing grips that are particularly well suited to additionally improve the forearm muscles and grip strength. As a special highlight, the wide pull-up bars are available with two diff erent grip diameters.
The pull-up bar can be loaded with up to 120 kg (please also note the wall condition).
- Chin-up bar with many grip positions
- Very solid steel construction
- Wide chin-up grip with two diff erent grip diameters possible
- Incl. two ball handles | climbing handles
- With angled, parallel and straight handles in diff erent grip widths
- Several ways to attach support straps or a sling trainer
Technical Data
- Packaging dimensions (L x W x H): 65 cm x 49 cm x 13 cm
- Weight (gross, incl. packaging): 14 kg
- Max. load approx.: 120 kg
Assembly
Before assembly, take a close look at the individual assembly steps shown and carry out the assembly in the order given.
NOTICE
First loosely screw all parts together and check that they fi t properly.
Tighten the screws using the tool only when you are instructed to do so.
Assemble both side frames (1) and both small handles (3) to the big handle (2) by using two bolts (4), four washers (5) and two lock nuts (6) on each side.
Wall Assembly
ATTENTION
- The supplied assembly material for wall mounting is not suitable for every wall. Pay attention to the condition of your wall to determine which assembly material is suitable for your wall.
- The contractual partner accepts no liability for any damage to the wall.
- Make sure that no cables or wires are running in the wall where you attach the training equipment.
NOTICE
The supplied assembly material is not suitable for every wall, so you may
need to get assembly material that is suitable for your wall.
- Drill a hole with a minumum depth of 80mm.
- Insert the expansion screw (with cover) into the hole.
- Tighten the nut, causing the bolt to unscrew and the inside to spread and fi x itself into the wall.
- Unscrew the nut.
- Slide the wall support on the bolt and fi x it with the previously unscrewd nut.
General Safety Instructions
DANGER
- Before you start using the equipment, you should consult your physician that this type of exercise is suitable for you from a health perspective.
- Note that excessive training can seriously endanger your health. If you notice any signs of weakness, nausea, dizziness, pain, shortness of breath, or other abnormal symptoms, stop exercising immediately and seek advice from your doctor if necessary.
WARNING
- This equipment may not be used by children under 14 years.
- Children should not be allowed unsupervised access to the equipment Persons with disabilities must have a medical license and must be under strict observation when using the equipment.
- The equipment is strictly for use by one person at a time.
CAUTION
- Make sure that nobody is within the range of motion of the equipment during training so as not to endanger you or other persons.
ATTENTION
- Do not insert any objects of any kind into the openings of the device.
Care, Maintenance and Storage
WARNING
The storage location should be chosen so that improper use by third parties or
children can be prevented.
- Clean the device with a dry soft cloth.
- Store the device in the supplied carton in a dry environment.
Warranty Information
Training equipment from TAURUS® is subject to strict quality control. However,
if a fi tness equipment purchased from us does not work perfectly, we take it
very seriously and ask you to contact our customer service as indicated. We
are happy to help you by phone via our service hotline.
Warranty period
The warranty periods, shown on our web shop, begin on delivery of the fi tness
equipment. The respective warranty periods for your equipment can be found on
its product website.
Contact
UK
- CUSTOMER SUPPORT
- 00800 2020 2772
- +494621 4210 944
- info@fitshop.co.uk
FAQ
- Q: What is the maximum load capacity of the chin-up bar?
- A: The chin-up bar can support up to 120 kg. Ensure proper wall condition when mounting.
- Q: Can children use this equipment?
- A: This equipment is not suitable for children under 14 years old. They should not have unsupervised access.
- Q: How should I clean and store the chin-up bar?
- A: Clean with a dry soft cloth and store in the provided carton in a dry place to prevent improper use and damage.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>