PHILIPS DN589 LuxSpace LED Downlight Instruction Manual

: September 14, 2024
: Philips

Table of Contents

PHILIPS DN589 LuxSpace LED Downlight
Specifications
Product Usage Instructions
FAQ
Product Type
Dimension
Installation
Inrush current
Read User Manual Online (PDF format)
Download This Manual (PDF format)

PHILIPS DN589 LuxSpace LED Downlight

Specifications

Product Type: LuxSpace Downlight/LED
Flux: DN589B, DN589X, DN591B, DN591X, DN592B, DN592X, DN594B, DN594X
Voltage (V): 220-240~
Frequency (Hz): 50/60
CCT: TNW/CED (2700-6500K)
Weight (kg): 0.35, 0.5, 0.72, 0.61, 1.27, 1.16
Dimension A: Min 200mm

Product Usage Instructions

Installation:

Connect power supply cable to the designated terminals.
Securely mount the downlight using appropriate fixtures.
Ensure proper alignment and fit within the cut-out size specified.
Remove any protective films after installation is complete.

Safety Instructions:

Only for indoor use.
Do not switch on before installation is fully completed.
Installation must be done by a qualified electrician following IEE regulations.
Avoid corrosive environments for storage or usage.
Avoid covering the luminaire with thermal insulation.
Do not use acid or alkaline cleaners for maintenance.
If any abnormalities are noticed, switch off the power and contact Philips for assistance.

Replacement and Maintenance:

The light source, control gear, or external cables should only be replaced by authorized personnel to maintain safety and functionality.

Environmental Considerations:

Operate the luminaire within specified environmental conditions to ensure product longevity and warranty validity.

FAQ

Q: Can this product be used outdoors?
- A: No, this product is designed for indoor use only.
Q: What should I do if I notice a problem with the operation of the downlight?
- A: Switch off the power immediately and contact your nearest Philips dealer for assistance.

Icons

Product Type

Dimension

Installation

Indoor use only.
Do not switch on before complete installation.
The luminaire shall be installed by a qualified electrician and wired in accordance with the latest IEE electrical regulations or national requirements.
Luminaire is suitable for direct mounting on normally flammable surfaces.
Luminaire must not be used or stored in corrosive environment where hazardous materials such as Sulphur, Chlorine, phthalates, etc. are present.
The light source and/or control gear and/or the external flexible cable contained in this luminaire shall only be replaced by the manufacturer or his service agent or a similar qualified person.
For controllable luminaires, basic insulation has been maintained between LV supply and control conductors.
The luminaire shall, under no circumstance, be covered with thermal insulation matting or similar material.
Do not use acid or alkaline cleaner to clean this luminaire. Do not use this luminaire in the environment that will corrode PC, for example ethylamine, tetrachloroethylene etc.
If any abnormal to be found or operation problem. Ensure switch off the power first and contact your nearest Philips dealer.
The Luminaire must be used within the applicable product specifications, installation instructions and environmental conditions for storage & operations according to application guidelines provided by Philips for product Warranty to be valid.

All the warnings and requirements in Chinese and English shall prevail. Other languages only for reference.

Inrush current

Please inform yourself about the local waste disposal, separation and collection system for electrical and electronic products and packaging. Please act according to your local rules and do not dispose of your old product and packaging with your normal household waste. The correct disposal of the packaging, your product and/or batteries will help prevent potential negative consequences for the environment and human health. Batteries should be disposed of separately from the municipal waste stream via designated collection facilities. When disposing a product that contains non-user replaceable batteries, the non-user replaceable batteries shall be removed by a professional.