LABOITE LX Platine Turntable The Concept Box LX Turntable User Manual

LABOITE LX Platine Turntable The Concept Box LX Turntable

YOUR LX SPEAKER

BOXES CONTENTS

• 3 power cords (C7 connector to EU plug, US plug, UK plug)
• Audio cord (RCA to 3,5mm stereo jack)
• RCA cable + ground wire
• Power source adaptor
• 4 shock absorbers for the vinyl turntable
• User Manual and Warranty card
• IEC adapter
• 1 box with LX speaker on his legs
• 1 box with the Elipson® turntable on his blotter and the shelf

SAFETY INFORMATION

1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings. Install by the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
9. Respect the safety principle of the biased plug or an earth-type plug. A biased plug is equipped with two pins, one larger than the other.
10. An earth-type plug has two pins and a third of the earth-type. The large pin or the third pin is provided for your safety. If the provided pin is not adapted to your electrical wall power socket, call an electrician to replace the obsolete electrical wall power socket.
11. Protect the power supply cord from being stepped on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
12. Only use attachments/accessories specified by the manufacturer.
13. Use the LX only in its original base.
14. Unplug this apparatus during lightning storms or when unused for a long period.
15. Have all maintenance work done by qualified, specialized personnel. Repairs are required when the device has been damaged: power cord or plug is damaged; liquid spilled on the device or if an object has fallen on it; if it rains on the device or if it is wet; if the device not normally operating; or if the device has fallen.

WARNINGS
To reduce the risk of fire or electrical discharge, do not expose the unit to rain or wet sources. The unit is class 1 classified, and it must be connected to the electrical wall power socket with an earth plug. The unit must be installed so that it can be removed from the electrical network using the earth plug (or with an adapted connector located on the rear side of the unit). If the power plug is used as a disconnection device, the unit must be available and easy to use. Only use the power cords supplied with the unit. We recommend not to place in a confined space.

Do not place the unit on a rug, or a smooth surface, and do not obstruct the air holes, the amplifier’s radiator (blades), or the output screens. The unit must not be used near water; it must not be exposed to an evacuation source, or to splashing, or to any other types of liquids. No object filled with water such as vases, should be placed on the unit.

WARNING DISCLAIMER
the assembly of the LX is a very important step for the correct use of the product. The end user should carefully read the assembly guidelines before setting up the product or consult a brand representative in case of any questions. CCLAB La Boite concept and its distributors cannot be held responsible in case the product falls due to a mounting that did not follow these guidelines.

ATTENTION
The purpose of the exclamation point in an equilateral triangle is to inform the user of the presence of important instructions in this manual about how to operate the device and maintenance operations.

DEEE SYMBOL
The separate recycling of electrical and electronic devices. This product contains electrical and electronic equipment that can be reused, recycled, or recovered, and therefore must not be discarded in your usual trash, which is not selectively sorted. Please return the unit or contact the authorized dealer who supplied you with the product for more information.

DANGEROUS VOLTAGE
The luminous indicator with the “arch in an equilateral triangle” symbol is intended to warn the user of the presence of a “dangerous current” not insulated in the product, and this current could be strong enough to cause an electric discharge on people.

CE MARK
This product conformed to the European directives related to low-voltage (2006/95/EC) and electromagnetic compatibility (89/336/EEC) when the unit is installed and used according to the user’s manual instructions. To guarantee extended conformity, only La Boite Concept accessories should be used with this product and the maintenance operations must be conferred to qualified and specialized personnel.

IMPORTANT: THE MANUFACTURER DISCLAIMS ANY RESPONSIBILITIES FOR RADIO OR AUDIOVISUAL INTERFERENCES GENERATED BY UNAUTHORISED CHANGES MADE TO THIS DEVICE. SUCH CHANGES COULD VOID THE MANUFACTURER’S WARRANTY AND CANCEL THE AUTHORIZATION OF UTILIZATION BY THE USER.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. This equipment was created and tested in conformity with the limits of class B digital devices by FCC rules. These limits were defined to provide reasonable protection against dangerous interferences inside a residential installation. The equipment generates, uses, and may emit radio frequency radiation if it is not installed or used in conformity with the instructions, and this may cause dangerous interference in radio communications.

However, it is impossible to guarantee that no interferences will appear in a specific installation. If this device generates interferences that disturb the reception of radio or television emissions, which may be noted by activating or deactivating the device, we propose that the user try to remedy such interferences in one of the following ways :

• Reorient or move the reception antenna ;
• Increase the distance between the equipment and the radio-television set ;
• Connect the device to a wall power socket of another circuit than that one used for the radio or the TV ;
• Contact the dealer or an experienced TV/radio technician for assistance.

The equipment recommended by the La Boite concept complies with FCC exposure guidelines and is approved as part of an uncontrolled environment. These equipment have been designed so that are installed and used from a minimum distance of 20 cm between the transmitter equipment and the user(s).

FCC CAUTION
Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

IMPORTANT
The unit may heat when used. Never operate the central part without its side bases. Do not place the equipment in a completely closed room or a compartment insufficiently ventilated. Make sure that no small object can pass through the LX. If it happens, immediately switch off the device, disconnect it from the wall power socket, and contact your dealer for assistance and advice.

LOCATION
Carefully select a spot for installing your equipment. Avoid placing it directly in sunlight or near a heat source. No fire source such as candles shall be placed on the device. Also, avoid any source that could cause vibration, dust, coolness, or moisture. The device can be used at average temperatures. The unit must be installed on the two (2) LX-provided legs. Do not operate the central part without its side bases. Do not install the equipment in a completely closed room or a set of compartments. Do not place the unit on an unstable surface or a shelf. Make sure that the furniture inserts have been correctly fastened. If not, the unit could fall and injure a child or an adult, and damage the product as well. Due to the disturbed magnetic fields, no record player or CRT television set must be placed near the device to avoid possible interference.

POWER SOURCE
The unit should only be used with the type of electric power source compatible indicated in the trapdoor storage space. If you are not sure about the power source rating in your place, please contact your dealer or the company responsible for the electric power installation in your area. The unit was designed to be left in Stand-by mode when not in use; this wall allows increasing the amplifier’s life (this is true for all electrical devices). To switch off the unit, press the ON/OFF button on the rear of the device (metal plate located under the central unit). If you do not intend to use the unit for a long period, simply unplug it from the wall power socket.

OVERLOAD
Avoid overloading the wall-mounted electrical installations or the extension cords because this could cause a fire or an electrical discharge. Overloaded DC installations, extension cords, damaged power cables, damaged or cracked insulation, and broken plugs are dangerous. They could cause a discharge or a fire. Make sure that each cables are correctly inserted. To avoid humming or background noise, do not mix interconnections with the power cord or loudspeaker cables.

CLEANING
To clean the unit, wipe it with a dry, lint-free cloth. Do not use liquid cleaning products containing alcohol, ammonia, or abrasives. Do not use a spray on and near the unit.

REPAIRS
These units should not be repaired by the user. Do not try to repair, dismount,, or un-assemble the unit if a problem occurs. A strong electric discharge could take place if these precautionary measures are not respected. In case of a problem or failure, please contact your dealer.

LA BOITE CONCEPT LIMITED WARRANTY

This product was designed and manufactured by the most rigorous quality standards. However, in case of a problem, the La Boite Concept, and their national distributors, guarantee labour (exclusions possible) and spare parts free in all countries served by a La Boite Concept-approved distributor. This limited warranty is valid for two years from the date of purchase unless exclusions are applicable in some countries according to national legislation. Contact La Boite Concept’s distributor in your country for more information. Please make sure to subscribe to the warranty on the La Boite concept website. Please make sure you register your LX speaker on our website: www.laboiteconcept.com/register

Or use this QR code to access directly.

1. The warranty is limited to the repair of the equipment. Transport or other costs, and risks associated with the pickup, transport, and installation of the products are not covered by this warranty.

2. The warranty is exclusively reserved for the original owner and may not be transferred.

3. During the 2-yea

4. This warranty is only eligible for products with faulty workmanship and/or defective.
   Parts at the moment of purchase and does not apply in the following cases:

   • a. Deteriorations resulting from an incorrect installation, connection, or packaging.
   • b. Deteriorations resulting from a usage other than the correct usage described in the User Manual, negligence, changes, or the use of parts not manufactured or approved by the La Boite concept.
   • c. Deteriorations resulting from defective or unsuitable auxiliary equipment.
   • d. Deteriorations resulting from accidents, lightning, water, heat, war, breaches of public order, or other causes outside of the reasonable control of Lthe a Boite concept or its approved distributors.
   • e. Products with serial numbers modified, erased, eliminated, or rendered unreadable.
   • f. Products repaired or changed by an unauthorized person.

5. This warranty is an addition to any national/regional legal obligation on behalf of the national distributors or dealers and does not affect your statutory rights as a customer.

6. To claim this warranty please use the original packaging of your LX.

HOW TO FILE A CLAIM UNDER THE WARRANTY
Please follow the procedure below if you desire to file a claim under the warranty :

1. If the equipment is used in the country where it was purchased, please contact the distributor approved by La Boite Concept which sold the equipment.
2. If the equipment is used in a country other than the country where it was purchased, please contact the national La Boite concept distributor of the residence country, which indicates to you where you can have the equipment repaired. If you desire to file a claim from France, please contact La Boite Concept in
3. France at laboiteconcept.com to obtain an accurate telephone/email address of your local distributor. To validate, your warranty, you should present the original copy of your sales invoice or another form of proof of your purchase and the date of purchase.

GENERAL DESCRIPTION

CONTROL PANEL

INPUT PANEL

TOP OF YOUR LX TURNTABLE

BACK OF YOUR LX TURNTABLE

LX TURNTABLE OPENING AND ASSEMBLING

BOXES CONTENTS
Don’t forget that the LX is heavy; Save the original packaging in case you have to return the device because the limited warranty does not cover damages due to shipping. La Boite concept’s “return within 30 days” policy covers only products that are returned in their original packaging.

CARTON BOX 1/2

• Loudspeaker cabinet carton box
• Protective Foam
• Protective cover
• A LX acoustic loudspeaker
• A front cover
• A pair of stands
• Eight flat-head screws
• Four rounded head screws
• An Allen Key 6 pan
• A RCA – mini-jack cable
• A RCA cable + gorund wire
• A power source for the speaker
• A power source for the turntable
• A universal adapter (IEC C14) for the power socket in the trap door
• A user manual

CARTON BOX 2/2

• Turntable packaging
• Protective foam
• Protective cover
• A blotter with the turntable fixed on it
• A shelf
• 6 wood sticks for vinyl sleeves

Need help to assemble your LX Turntable?
Please visit our instruction video about the LX Turntable on YouTube or through this QR code :

ASSEMBLING YOUR LX TURNTABLE

1. Remove the stands and protective foams.
2. With the help of somebody : using the notches on the side of the foam, grab the entire unit and pull it out. Please keep the carton box as well as the original protective foams.
3. Remove the upper protective foam. With the help of somebody, lift the loudspeaker to remove the front cover. Then, replace the loudspeaker with its protective foam respectively.
4. Use the “LEFT” and “ RIGHT” indications to match the stands and the loudspeaker and screw the stands on the loudspeaker.
5. Please pay attention to using the right screws in the right place following the stickers provided for the purpose.
6. With the help of somebody, flip the LX to a standing position and remove the protective foam.
7. Open the carton box 2/2 containing the turntable and the shelf.

To connect the turntable to the loudspeaker
On the blotter

1. Plug in the RCA cable provided.
2. Connect the turntable’s ground wire.
3. Plug in the power cord provided. Please make sure to place all cables, as shown below to avoid any contact between the loudspeaker and the turntable.
4. The shock absorbers isolate the turntable from any unwanted vibrations and interferences produced by the speakers. For optimal sound restitution, place the shock absorbers, the cables, and the power cord as shown in the drawing below.

To connect the turntable to the loudspeaker

On the source panel

1. Plug the other end of the RCA cable into the RCA input on the source panel of the loudspeaker.
2. Connect your turntable ground wire to the ground pin on the source panel of the loudspeaker.
3. Plug in your turntable to the power socket inside the trapdoor with the power cord provided.

Once everything is connected
Clip the 4 shock absorbers in the groove of the pods provided for this purpose: there are 2 pods per shock absorber.

1. Then place them in the grooves located on the loudspeaker. Put the blotter down on the shock absorbers and Search for a “click” sound. Check if the blotter is in the right position on the shock absorbers and make sure to place the cables through the holes designed for this purpose.
2. The shelf is pre-assembled with L-shaped metal pieces.
3. Match them with the holes provided for the screws on the stands. Use the four flat-head screws provided.
4. Arm
5. Cartridge holder
6. Anti-skating track well
7. Cartridge
8. Counterweight
9. Felt
10. Pulley
11. Belt
12. 33 rpm / 0(off) / 45 rpm Switch
13. Setting up the belt :
    • With the left hand, gently hold the belt in the slot of the pulley.
    • With the right hand, tension the belt from the pulley to the plate avoiding stretching.
    • Carefully wrap the belt around the plate avoiding folds.

Need help to assemble your LX Turntable?
Please visit our instruction video about the LX Turntable on YouTube or through this QC code :

QUICK START
IDEAL POSITIONING OF THE LX TURNTABLE IN YOUR ROOM
Traditional acoustic speakers have a restricted ideal listening field in both longitudinal and latitude planes. Thanks to its filtering and the pattern of its acoustic baffles, as well as the positioning of its rear loudspeaker, the LX offers optimal listening wherever you are seated or moving. Thus, the LX has been designed for both high-fidelity listening at low levels, as well as for a group experience during a party at high levels.

FILLING YOUR ROOM WITH SOUND
The spatialization of the “Wide Stereo Sound 3.0®” (patented by La Boite concept) is the result of research aimed to obtain stereophonic sound renderings and homogeneous quality under all circumstances, whether the listener is alone or in a group, seated or standing, close to the speaker or further away.

Besides enhancing the greatest listener mobility concerning the LX, this research has contributed to preserving the sound of the device, regardless of its location inside the listening room, thus reducing installation constraints for the user. The LX side baffles help to enlarge the stereophonic listening from one of the furniture’s sides, by reducing the nearby effects from one channel to the other. As a result, the listener does not have to stand in the central position to obtain an enjoyable rendering of the stereophonic image (which also allows the possibility of several listeners simultaneously enjoying a stereophonic sound broadcast). Furthermore, the user no longer needs to place the  LX perfectly symmetrical according to the walls of the room.

TURNING THE POWER ON/OFF

1. Insert the power cord into the power cable plug located under your LX (please refer to the drawing on page 61).
2. Place the power cord into the groove on the stands provided for this purpose.
3. Connect the power cord to the wall socket.
4. First, turn on the LX by switching the master ON/OFF at the back of the loudspeaker (please refer to the drawing on page 61).
5. Then, turn the volume control knob clockwise to switch on the LX. The Bluetooth LED lights up.
6. The LX will automatically go into standby mode if you leave your device without a signal for 30 minutes. The standby LED light will turn red. To wake up the device, press the control knob or play music from either source.
7. To temporarily put the LX into “off” mode and avoid power consumption, turn the volume control knob counterclockwise to the “OFF” point until you hear a “click” sound.
8. To fully switch the LX off, switch the master ON/OFF at the back of the loudspeaker (please refer to the drawing on page 61). All the LED lights are now off and the USB power disconnects.

CHOOSING YOUR SOURCE
Once you have set up your connections on the input panel, you can select the source you want to use by pressing the corresponding button on the control panel (from 1 to 7).

• Selecting the source corresponds to (1) the Bluetooth connection with your devices.
• Selecting the source corresponds to (2) the Bluetooth pairing with your devices.
• Selecting the source corresponds to (3) the AUX input.
• Selecting the source corresponds to (4) the Phono or RCA inputs provided to connect your vinyl turntable. This source is linked to the RCA/Phono button located on the input panel.

RCA mode: for a line-level input (CD, DVD, …) or to use if your turntable is pre-amplified.
RCA mode: to use with the cable with the two audio ends (one RCA end and one stereo 3,5mm end) provided.
Phono mode: if your turntable is not pre-amplified (traditional turntable with a ground output).

NOTE
THE USED SOURCE IS INDICATED BY THE LED LIGHT

VOLUME AND BASS SETTINGS

TO INCREASE THE VOLUME
Turn the volume control knob clockwise.

TO DECREASE THE VOLUME
Turn the volume control knob counterclockwise.

BASS SETTINGS
Turn the knob towards the – to decrease the bass and towards the + to increase the bass. When the knob is positioned at noon, the bass is neutral.

TURNTABLE USE

• Swap to the PHONO source by switching the button on the input panel. You are now in “Turntable mode”
• Switch on the loudspeaker (please refer to the page 74)
• Click on the RCA/Phono button on the control panel (please refer to page 58)
• Refer 1 Place the disc on the felt, and make sure it is properly cleaned and dusted.
• Refer 2 Select the speed according to the chosen disc (33 or 45 rpm).
• Remove the protection of the cartridge.
• Refer 3 Take out the tonearm from its support, and gently position it on the disc.
• Start playing.

At the end of the disc

• Put the speed switch on “0”.
• Pick up the arm and gently replace it on its support.

ANTI-SKATING
When the turntable is operating, the friction of the diamond in the vinyl furrow creates a force that pulls the tonearm toward the center of the turntable. The anti-skating compensates for this attraction to reduce the distortion generated. Ideally, the setup
of the anti-skating is done on a blank disc (not provided). The force of the anti-skating can be manually adjusted by the trackwheel on the tonearm. When the cartridge is placed on the disc, it should not move either inwards or outwards from the disc.

• Switch on the turntable.
• Place the cartridge in the middle of the blank disc.
• If the cartridge moves inside the vinyl, the anti-skating is too low: you must increase the force by turning the track-wheel counterclockwise.
• If the cartridge moves outside the vinyl, the anti-skating is too strong: you must decrease the force by turning the trackwheel clockwise.

ORIENTATION OF THE CARTRIDGE
In case of a cartridge change, or if the turntable has been moved, it may be necessary to adjust the orientation of the cartridge. The cartridge holder includes two screws to adjust the angle of the cartridge according to the type of the vinyl (33 rpm or 45
rpm).

Need help to tune your arm?
Please visit our video about the LX Turntable on YouTube or through the QR code :

USING YOUR LX WITH YOUR DEVICES
BLUETOOTH® CONNECTION
Your LX is equipped with Wireless Bluetooth®. This technology allows you to send your music wirelessly from your computer, tablet, or smartphone to your La Boite concept speaker. The Bluetooth® receiver allows you to listen high high-definition music wirelessly. To use this connection, you have to: To use this connection, you need to :

1. Turn the LX on.
2. The Bluetooth® is the default source and will automatically turn ON. The LED light on the LX will start to flash in white.
3. Activate the Bluetooth® functionality on your device (tablet or smartphone).
4. Press the button on your LX, and the LED light flashes rapidly.
5. On your device, select the LX in the list.
6. The LED light will turn to a steady white, you are now connected.
7. You can now control your playlists from your source (computer, tablet, or smartphone) in a radius of about 10 meters around your LX.

NOTES
You only need to pair your computer, tablet, or smartphone with the LX once, after which the device will be included in the list of your Bluetooth® devices. When pairing a new device, press the pair button again, and repeat the steps above. Your LX can store up to six devices in its memory. The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth® SIG, Inc. Other trademarks and trade names are those of their respective owners.

USB PLUG
This plug allows connecting a computer. This function allows you to use the sound card integrated into the device without using it regardless of the quality of the card integrated into your computer. Only this plug allows reading music via computer. This system was developed for an effective operation without parameter setting. However, in some situations (music software already opened, for example), this USB input can be used with a simple manipulation. In this case, for the connection to be effective, simply select the USB sound card in your computer’s menu.

USB CHARGER
The LX comes with a built-in 2-port USB charger. The ports will power your USB devices even if the speaker is in standby mode. Powering off the LX with the rear main switch will also power off the USB ports. The charger works with most USB-compliant devices at 5V and can provide up to 2.4A for USB-A-charging current (for fast iPad charging).
Note: Never use the charger with damaged cables as they could overheat and cause a fire. USB-A charging current s limited to 15W. This is enough to charge most phones and tablets. The charger is not compatible with the old iPod Classic (pre-2010)and other rare devices are not fully compatible with the USB standard.

CHARGING THROUGH THE IEC POWER SOCKET
The LX is equipped with an integrated IEC power socket located in the trap door, on the righthand. Thanks to the C14 IEC universal adaptor provided, you will be able to plug in and charge all your devices even when the LX is asleep. However, if you turn off the LX using the master ON / OFF, there will no longer be power running through the IEC plug.

CABLE CONNECTION OPTICAL: OPTICAL AUDIO DIGITAL INPUT
Use the optical input to connect your LX to your TV, hard disk player, streaming player, and satellite or cable receiver. The optical input only works with PCM stereo, if a connected device sends 5.1 audio (or similar surround sound), the LX will not work. We recommend that you use the optical input for the videos as this cable avoids the latency between image and sound.

To use this connection, you just have to :

1. Connect the optical audio cable to the optical audio input on your source.
2. Turn the LX on.
3. Select the Optical source by pushing the control knob.

RCA ANALOGUE INPUT
Use the RCA input for connecting your LX to audio sources such as your mobile phone, music player, or tablet.

To use this connection, you need to

1. Connect the audio cable provided to your LX and the audio output of your music device (source).
2. Swap to the RCA source by switching the button on the input panel.
3. Select RCA/Phono as source by pushing the Control knob until RCA/ Phono LED is illuminated.

AUXILIARY: 3.5 MM STEREO PLUG
Use the 3.5mm jack input to connect your LX to audio sources such as your CD player or turntable. (pre-amplified).

To use this connection, you need to

1. Connect the audio cable to your LX and the audio output of your music device (source).
2. Select AUX as a source by pushing the Control knob until the AUX LED is illuminated.

WHAT TO DO?
TO CLEAN YOUR LX TURNTABLE
Before cleaning the device, unplug your LX from the power socket. Clean the device only with a dry cloth. Do not use cleaning alcohol or solvents to clean the device’s surface because these could damage the painting and cause electrical failures or fire if they penetrate the device’s electronics.

NO POWER
Make sure that the AC cable is solidly connected. Make sure that the plug is fully inserted in the power socket and there is power. Check that the master ON / OFF located underneath the loudspeaker (please refer to page 61) is positioned on “ON”. Make sure that the LX is not in standby mode. Make sure that the device is switched on by checking the Bluetooth® white LED on the top panel. (cf p. 58)

NO SOUND
Make sure that the volume is turned up to an audible level and that the input source is at its maximum. Make sure that an available input source is selected (cf p. Using your LX with your devices) Make sure that the LX is not in standby mode. Check if the bluetooth connection with your device is still active. Finally, if you still cannot hear any sound coming out of the LX, increase the volume (please refer to page 76)

THE SOUND IS DISTORTED OR BUZZES
Check the connections of your music readers. Make sure that all the connecting cables are correctly plugged in, especially the earth/protection shield connections. Make sure that your cables are in good condition.

BACKGROUND NOISE AND UNDESIRABLE INTERFERENCES
Separate the device from other electrical appliances that may be causing the interference. If the above solutions do not remedy your problem, please contact a professional. Your home electrical installation may be connected to the earth’s ground or it may be polluted electrical parasite devices that imply audible noise. For any repairs during or after the warranty, please contact your dealer.

THERMAL PROTECTION OF THE POWER AMPLIFIER
In cthe ase of high-level extended uses, a rising temperature can alter the performance of the amplifier. Above 110 degrees, the highest level allowed for safe optimal listening conditions must be lowered until the amplifier cools down.

BLUETOOTH ISSUES
When connecting a new device make sure the LX input source is switched to Bluetooth®. If the LX does not show up on your device make sure to manually refresh the Bluetooth® device list on your phone/device after rapidly pressing the LX Bluetooth button. There will be a short audio signal once your device makes the connection. If you can’t hear any sound make sure the LX is not on standby and turn up the volume. Your device may lose connection to the LX when leaving the Bluetooth range or if in standby mode. In this case, a Bluetooth connection can easily be made again from your phone’s Bluetooth settings page ( without the need to press the Bluetooth button on the LX). Note that depending on your installation and your mobile device the Bluetooth range will be limited to 5-10 meters or less if walls or furniture obstruct the signal.

TECHNICAL SUMMARY

SOURCES

• Bluetooth® AptX
• AUX: stereo jack 3.5mm
• Phono input with ground
• RCA input
• Optical: optical digital audio input DAC Wolfsond 24 bits USB

USB CHARGERS

• 2 x USB-A (permanent connection, charging up to 2,4 A)

DIMENSIONS & WEIGHT

• H : 790mm, L : 690mm, D : 480mm
• Weight: 30 kg

LOUDSPEAKERS

• 1 x Bass reflex woofer with cellulose pulp cone
• 2 x tweeters TWZ WS 3.0 with cones and bullet equipped with internal convex deflectors
• 2 x fiberglass mid-range drivers with aluminium cones.
• Class D 5 channels 4.1 amplifier

TURNTABLE
Elipson® Turntable
Compatible with cartridges MM/MC
Signal to noise-ratio : >82dB MM / >78dB MC

269 Chemin De Mentaberrikoborda, 64480 USTARIZ – 05 64 11 54 15
41 Rue Sedaine, 75011 PARIS – 01 43 72 53 24
info@laboiteconcept.com
www.laboiteconcept.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>