V380 PRO XD 1080p HD USB Wifi Camera User Manual
- May 15, 2024
- V380 Pro
Table of Contents
V380 Pro PRODUCT MANUAL
Intelligent – Technology + Security
XD 1080p HD USB Wifi Camera
Model: XD
Note: Read carefully before using the device and keep it for subsequent
use
Download
Search for “V380 Pro”in the App store or scan the QR code below to download and install the V380 Pro APP.
http://www.av380.cn/w_index.php
Reset the camera
- Power on the camera.
- Press and hold the reset button for several seconds, the camera will prompt “Restore factory default setting”.
Hotspot configuration
- Click “Can’t find the QR code on the device?”.
- Select “WiFi Smart Camera” – “AP hotspot connection”.
Android
- Select WiFi and enter your WiFi password.
- Select “Connect AP hotspot” button and connect to the device hotspot(MV+ID).
- The device will automatically connect to WiFi after returning to the APP.
iOS
- Enter your WiFi password. (If you want to connect to other WiFi, please connect your mobile phone to the WiFi you need and then return to the APP to refresh).
- Select “Connect AP hotspot” button and connect to the device hotspot(MV+ID).
- The device will automatically connect to WiFi after returning to the APP.
FAQ
Q: The camera can't connect to WiFi.
A: 1.The wrong password is a common cause of connection failure. Please confirm whether the password entered is correct. 2.Please confirm that the connected WiFi is 2.4GHz.If you use a 2.4GHz-5GHz dual-band router, please select 2.4GHz WiFi. 3.The WiFi name should not contain special symbols and should not be hidden. The restrictions such as AP isolation and WiFi squatter prevention of the router cannot be opened.
A: 1.Please restart the camera and confirm that the camera can start normally and connect to WiFi. 2.Please turn off the router functions of the firewall, blacklist, WiFi squatter prevention, MAC address binding, etc.To support remote preview, which requires the router to conncet to WAN. 3.If the router is replaced or the WiFi password is changed, please reset the camera and reconfigure the network.
Attentions
- The camera only supports 2.4GHz WiFi. Please confirm that the WiFi connected by the mobile phone is 2.4GHz before network configuration.
- Concerning Micro SD card recording, when the recording volume reaches the upper limit, the earliest recording file of the recording event will be automatically overwritten.
- Long-term use in the unconventional environment(high temperture, high humidity, the large amount of dust or smoke,etc.)may damage the camera.
- V380 Pro APP and device firmware will be updated from time to time. For your best experience, please update the APP and upgrade the device firmware in time.
FCC Warnning:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection againstharmful interference in a
residential installation. This equipment generates, uses and can radiateradio
frequency energy and, if not installed and used in accordance with the
instructions, maycause harmful interference to radio communications. However,
there is no guarantee thatinterference will not occur in a particular
installation. If this equipment does cause harmfulinterference to radio or
television reception, which can be determined by turning the equipmentoff and
on, the user is encouraged to try to correct the interference by one or more
of thefollowing measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>