GLADEN SIGMA High Performance Car Speakers User Manual
- September 12, 2024
- GLADEN
Table of Contents
GLADEN SIGMA High Performance Car Speakers
Specifications
- SIGMA SW 165:
- Fs: 46.2 Hz
- Re: 2.61 Ohm
- Z: 3.00 Ohm
- Qms: 4.325
- Qes: 0.48
- Qts: 0.43
- Vas: 16.25 Liter / liter
- Sq: 135 qcm
- Mms: 18.1 g
- SPL: 88 dB (1W/1m), 92 dB (2.83 V/1m)
- Power Handling: 250W (Peak), 175W (RMS)
- SIGMA SW 130:
- Fs: 62.9 Hz
- Re: 2.63 Ohm
- Z: 3.00 Ohm
- Qms: 3.895
- Qes: 0.49
- Qts: 0.44
- Vas: 7.0 Liter / liter
- Sq: 86 qcm
- Mms: 9.69 g
- SPL: 87.4 dB (1W/1m), 92.2 dB (2.83 V/1m)
- Power Handling: 225W (Peak), 150W (RMS)
- SIGMA SM 50:
- Fs: 135 Hz
- Re: 3.20 Ohm
- Z: 4.00 Ohm
- Qms: 7.60
- Qes: 0.58
- Qts: 0.54
- Vas: 0.30 Liter / liter
- Sq: 15.6 qcm
- Mms: 1.60 g
- SPL: 84.0 dB (1W/1m), 86.9 dB (2.83 V/1m)
- Power Handling: 120W (Peak), 80W (RMS)
- Hochpass | Highpass: 300 Hz | 24 dB/Okt.
Product Usage Instructions
SIGMA SW 165 Installation Steps:
- Position the speaker mounting ring and screw it tight with the provided screws.
- Position the speaker in the mounting ring and click it into place using the locking tool (counterclockwise).
- Insert the protective grille into the designated recess in the mounting ring.
SIGMA SW 130 Usage Guidelines:
The SIGMA SW 130 is best utilized as a woofer/midrange driver in a two-way combination or as a midrange driver in SQL configurations thanks to its linear frequency response up to well over 10,000 Hz.
SIGMA SM 50 Product Features:
The SIGMA SM 50 is a universal midrange or full-range loudspeaker with accurate reproduction up to over 20 kHz, a ventilated voice coil former for reduced distortion and compression, and a low-loss suspension for better reproduction of details and dynamics.
Frequently Asked Questions
- Q: Are these speakers suitable for electric or hybrid vehicles?
- A: No, there is a danger to life if any work is done on the electrical system of electric or hybrid vehicles by oneself.
- Q: What is the power handling of SIGMA SM 50?
- A: The SIGMA SM 50 has a power handling of 120W peak and 80W RMS.
Thank you for choosing the GLADEN SIGMA speakers.
The GLADEN SIGMA speakers have been given an optimum price/performance ratio in order to achieve the best possible sound performance with any music material in car audio applications. Each speaker in the GLADEN SIGMA series has been carefully designed and built to meet the demanding requirements of the vehicle. Please read the information in this document carefully so that you can get the most out of your GLADEN speakers. The power specifications listed in each case represent the continuous (RMS) amplifier power per speaker and assume that the user regularly utilizes this power to the full without drastically overdriving the amplifier (clipping). Maximum flexibility combined with unique performance: the GLADEN SIGMA series combines these two worlds to perfection. A 22 mm tweeter unit, an extremely variable midrange driver and two woofers with an extended maximum excursion inspire with musical drive. Installation is quick and easy thanks to the flexible crossovers (woofer/midrange and tweeter sections can be separated). In addition to conventional operation, this crossover design also allows a bi-amping configuration
Safety instructions
Please read all notes and warnings in this manual.
These will not only inform you about possible damage or injury, but also about
possible functions and settings. Our products are only suitable for users with
the necessary specialist knowledge. The relevant safety regulations for load-
bearing body parts, regulations on internal vehicle safety, as well as the
regulations of the responsible vehicle manufacturers (general operating
licence) must be observed. Hearing damage: Sustained, excessive volume levels
of over 85 dB can permanently impair hearing. Stereo systems are capable of
producing sound pressure level of over 85 dB. Sound level and perception: The
use of stereo systems can impede the hearing of important sounds and signals
in traffic and thus lead to hazards while driving. GLADEN assumes no
responsibility for hearing damage, physical injury or property damage
resulting from the use or misuse of its products. Working on vehicles: Do not
operate vehicles until all retrofitted components (speaker boxes, speakers,
amplifier, DSP, …) are securely installed. Loose parts can become dangerous
(flying) projectiles in the event of a sudden driving maneuver or an accident.
Do not drill or screw into vehicle panels or sheet metal until you are sure
that there are no important parts, cables or lines underneath. Pay attention
to things like fuel, brake, oil lines and electrical cables as preparation for
installation when planning the system. Disconnect the earth terminal (-) from
the vehicle battery (auxiliary batteries) before starting installation to
avoid possible short circuits. If body panels are to be machined or removed
for mounting the speakers or amplifiers, contact an appropriate specialist
workshop. In the event of damage to load-bearing bodywork parts, the operating
permit may be invalidated! Be careful when removing interior panels. The
vehicle manufacturers use a wide variety of fastening elements (clips, screws,
rivets, …) which can be damaged or may be damaged during dismantling (dents or
scratches on surfaces (e.g. metal sheets may rust)).
Electricity danger! DO NOT touch the connections of the amplifier or the
speakers during operation! Electric and hybrid vehicles! There is danger to
life! Do not any work on the electrical system by yourself! Information on
disposal of old electrical and electronic equipment (applicable for countries
that have adopted separate waste collection systems): Products with the symbol
(crossed-out wheeled bin) cannot be disposed of as household waste. Old
electrical and electronic equipment should be recycled at a special waste
facility. Contact your local authority for details in locating a recycle
facility nearest to you. Proper recycling and waste disposal will help
conserve resources whilst preventing detrimental effects on your health and
the environment. This product can be disposed of with the used car together.
In this case don’t remove it from the car
Models
SIGMA SW 165
The SIGMA SW 165 bass/midrange driver uses an optimized ferrite system that guarantees optimum heat dissipation even at high levels. Its newly developed HEXATEC compound membrane guarantees a linear frequency response.
Woofer
SIGMA SW 130
The SIGMA SW 130 serves a wide range of applications. As a woofer / midrange driver, it is at its best in a two-way combination. Thanks to its linear frequency response up to well over 10,000 Hz, it can also be used excellently as a midrange driver in SQL configurations. In addition to very good mid-range reproduction, its powerful driver also offers remarkable bass reproduction for its size.
Technical data:
Midrange speaker
SIGMA SM 50
The SIGMA SM 50 is a universal midrange or full-range loudspeaker. The chassis is a full-range design with accurate reproduction up to over 20 kHz. It has a ventilated voice coil former for reduced distortion and compression. The low- loss suspension (high Qm) ensures better reproduction of details and dynamics. The scope of delivery includes both a design grille and a hexagon grille
Technical data:
Technical data:
Assembly and accessories
- Position the speaker mounting ring and screw it tight with the 4 screws supplied
- Position the speaker in the mounting ring and click it into place using the locking tool. (Counterclockwise)
- Now insert the protective grille into the recess provided in the mounting ring.
Important note:
When mounting, pay attention that the rear of the midrange driver is well ventilated. Poor ventilation of the rear of the cone can lead to a significant deterioration in the sound.
Tweeter
SIGMA ST 22
The compact design of the SIGMA ST 22 is unique in ist class. An innovative modular system makes it flexible, even for use in original vehicle installation locations. The tweeter has a very good omnidirectional response and, thanks to its coupling volume, allows a deep connection to a woofer/midrange driver. The scope of delivery includes a wide range of installation accessories and shrink tubing for the separate crossovers. A OEM Design grille is optionally available in silver or black chrome-plated.
Technical data:
Technical data:
Accessories
Installation example with hexagon
Installation example with OEM design grille
A wide variety of mounting options can be realized with the universal ring. In the configuration shown, for example, the tweeter can be aligned with the metal band on a vehicle A-pillar and then modeled with optional fiberglass filler.
When used in original installation locations, such as in the dashboard, the ring can be used rotated. Please always use the locking plugs. If necessary, fix them with glue.
Crossover
SIGMA SN 2
With the SIGMA SN 2 crossover, you can realize various 2-way configurations with loudspeakers from the SIGMA series. Furthermore, the SIGMA SN 2 is designed so that you can install it as a whole or split the high and low sections, depending on the installation situation. To do this, remove the pcb from the crossover housing, pull out the marked jumpers and break through the pcb at the predetermined breaking point. During assembly, these can be insulated using the heat-shrink tubing supplied.
Complete sets
SIGMA 130.2
- 2 x SIGMA SW 130 (Tieftöner | Woofer)
- 2 x SIGMA ST 22 (Hochtöner | Tweeter) inkl. Zubehör und Gitter | incl. accessories and grille
- 2 x SIGMA SN 2 (Frequenzweiche | Crossover)
- 1 x Anleitung | Manual
SIGMA 165.2
- 2 x SIGMA SW 165 (Tieftöner | Woofer)
- 2 x SIGMA ST 22 (Hochtöner | Tweeter) inkl. Zubehör und Gitter | incl. accessories and grille
- 2 x SIGMA SN 2 (Frequenzweiche | Crossover)
- 1 x Anleitung | Manual
SIGMA 165.2 ac
- 2 x SIGMA SW 165 (Tieftöner | Woofer)
- 2 x SIGMA ST 22 (Hochtöner | Tweeter) inkl. Zubehör und Gitter | incl. accessories and grille
- 1 x Anleitung | Manual
- Anmerkung: Nur für aktiven Betrieb | Note: Only for active mode
Although we have carefully researched and checked several times, we cannot accept any liability for possible errors.
Contact
- Bertha – Benz – Straße 9
- 72141 Walddorfhäslach
- www.gladen.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>