atomberg SL-1 Smart Lock Installation Guide

atomberg SL-1 Smart Lock

Accessories

• Door Sensor

• Baseboard

• Screwdriver ➀

• Screwdriver ➁

• Screw M3*6

• Fastening screw

Installation Instructions

1. Install the bottom plate.

2. Ensure the bottom plate is installed properly.

3. Insert the key.

4. Turn the key to check if it can be turned smoothly and if the lock bolt is retractable.

5. Install the main body of the lock; make sure the snap is snapped on the bottom plate and the key is inserted in the slot of the knob.

6. Fix the main body with two screws; turn the knob to check if it can be turned smoothly and if the lock bolt is retractable.

7. Close the battery cover.

8. Installation of the lock’s main part is completed. Please install the Door Sensor properly as per the following steps.

9. Install on SL-1 Smart Lock. (Note: When the lock is on the right side of the door, please install in an inverted way.)

10. Based on the designated position of , fix the Door Sensor to door frame with double-sided tape. (Note: The Door Sensor may not operate in case of the iron door and other doors where the magnetic force does not work well. In this case, please adopt timed Auto Lock without Door Sensor.)

11. Installation is completed.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>