atomberg Renesa 1200mm BLDC Motor with Remote 3 Blade Ceiling Fan Instruction Manual

June 5, 2024
atomberg

atomberg Renesa 1200mm BLDC Motor with Remote 3 Blade Ceiling Fan

atomberg-Renesa-1200m-BLDC-Motor-with-Remote-3-Blade-Ceiling-Fan-
PRO

PACKAGE CONTENTS

atomberg-Renesa-1200m-BLDC-Motor-with-Remote-3-Blade-
Ceiling-Fan-1

WARNING
Do not install or use fan if any part is damaged or missing. This product is designed to be used only with those parts or accessories supplied with this product and/or any accessories designed specially for use with this product by Atomberg. Any such use of other parts or accessories may turn the product warranty null and void, and may result in personal injury or property damage as well.

SAFETY INSTRUCTIONS

Be careful of the fan and blades while cleaning, painting, or working near the fan. Always turn off the power to the ceiling fan before servicing. Do not put your hand or any other objects near the fan blades while the fan is running. Do not modify the blade design to change the air flow.

WARNING
Observe the following to reduce the risk of fire, electric shock or injury: Only use this unit in the manner intended by Atom berg. If you have any questions regarding the product, please contact Atomberg. Before servicing or cleaning, switch off the main power panel and switch. Wiring of the fan must be done only by a qualified and certified electrician.

FEATURES

India’s most energy-efficient RENESA ceiling fan

  • More than 65% energy saving as compared to an ordinary fan
  • Highest service value (air delivery/power consumed) in India
  • Runs 3 times longer on inverter resulting in longer battery runtime• Smart sensorless algorithm for greater reliability
  • No heating of fan even after long hours of runtime, resulting in an extra-long life
  • Consistent speed even at low voltages
  • Easy speed controls using a smart remote
  • LED indications for easy remote use
  • TIMER feature automatically switches OFF the fan when fan is running state and switches ON the fan when fan is in OFF state
  • SLEEP will work for only 4 hours of Sleep keypress. For the first 2 hour, it will reduce speed by 1, and then after the next 2 hours, it will be reduced by 1 speed
  • Full copper motor and double ball-bearing for better stability and longer life
  • Aluminum body and blade, resulting in zero rust
  • Zinc-plated parts and accessories for rust-free life
  • Protective coating over electronics for better resistance against moisture • All fans are tested for durability in extreme conditions before shipping.

BIG ENERGY SAVINGS
Stomberg is India’s most energy-efficient ceiling fan. A super-efficient BLOC motor technology is used, which consumes very little energy. Atomberg fans consumes just 1 /3rd of the power used by ordinary induction fans. Ordinary induction fans run on 75watts, whereas Atomberg fans run on just 28watt at full speed. There is huge saving potential for households, and institutions such as hospitals, colleges, schools and commercial spaces.

INSTALLATION

Assembly:
Mandatory Step:
Bypass or eliminate the regulator from the connection before installing on Atomberg fan for optimal performanceatomberg-Renesa-1200m-BLDC-Motor-with-
Remote-3-Blade-Ceiling-Fan-2

Step 1
Carefully remove the motor from the box and keep it on soft padding to prevent it from getting scratched.
Step2
Insert the canopy into the shaft and securely, attach the shackle to the hanger or ceiling hook using the screws provided with the package. Fasten the nut, and make sure that you fit the safety nut. washer and the R-pin to prevent slipping. Adjust the top canopy so that it covers both the assembly and the connection.
Step 3
Align the holes on the blade shank with the motor holes. Securely fasten the blades with the screws and washer provided.

HOW TO HANG THE FAN
Step4
Insert the screw to assemble the shaft and the down rod. Insert the washer, nut and R-Pin in the sequence depicted in the illustration below. Pull down the canopy toatomberg-Renesa-1200m-BLDC-Motor-with-Remote-3-Blade-Ceiling-
Fan-6

Step 5.

The fan blade must be hung with at least 1 foot of clearance from the ceiling for optimal performance and safety. Any object next to the fan must be at least 2 feet away from the tip of the fan blade to reduce chances of risk or injury. The fan must be hung with at least 7 feet of clearance from the floor to the blades.

ELECTRICAL WIRING INSTRUCTIONS
Step 6.
Make the correct wire connections to operationalize the fan. Adjust the canopy as required Color codes of the wires may vary from region to region. Please check your state or country notifications regarding the same.

USING YOUR CEILING FAN

Congratulations! You have successfully installed your new ceiling fan using the instructions provided in this guide.

  1. Restore the electrical power.
  2. Power ‘ON’ the ceiling fan using switch on the panel in the room. The LED
  3. Use your remote to operate the ceiling fan.
  4. If you are leaving the room or facility for a long duration or on holiday, then power ‘OFF’ the ceiling fan using the switch on the panel.

HOW TO USE YOUR REMOTE

The remote provided along with your ceiling fan is ergonomically designed. The soft controls on the remote are long-lasting. SLEEP mode adds smart comfort, as the temperature drops over the night and if you wish to auto-reduce the speed. With TIMER mode, you can switch OFF or switch ON the fan automatically after set hours to further save energy. atomberg-Renesa-1200m-BLDC-Motor-
with-Remote-3-Blade-Ceiling-Fan-8

CONTROL FAN SPEED WITHOUT REMOTE

The fan’s main switch can be used to control its speed. Turn the fan’s switch OFF & ON repeatedly to set the fan to the desired speed. The delay between the toggling between the OFF and ON buttons should be approximately 1 second. If toggling is too fast or too slow, 1t will not work. While toggling, the LEDs will glow to indicate the speed of the fan. Refer to the below table to control the fan using the switch.atomberg-Renesa-1200m-BLDC-Motor-with-
Remote-3-Blade-Ceiling-Fan-9

TROUBLESHOOTING

Your ceiling fan is designed to be long-lasting with a strong body and well- tested electronics, however 1f any problem arises, please refer to the guidelines shared. Please contact a local electrician or service engineer if you need any help.atomberg-Renesa-1200m-BLDC-Motor-with-Remote-3-Blade-
Ceiling-Fan-10

MAINTENANCE

Periodic cleaning of your ceiling fan is the only maintenance needed. When clea_ning, _use only a soft lint-free cloth or brush to avoid scratching the smooth paint firnsh. You can use moist cloth to remove stains if any. However, do not.use water directly. Abrasive cleaning agents are not required and should be avoided to prevent damage to the outer finishing.

WARNING
Do not use water when cleaning your ceiling fan. It could damage the motor by causing short-c1rcu1t and creating the possibility of an electrical shock. Do not bend the blades while cleaning. A bend in the blade may result in unstable fixing and affect the air delivery.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals