ASUS RTX 4080 ROG Strix GeForce Installation Guide

: September 10, 2024
: Asus

Table of Contents

ASUS RTX 4080 ROG Strix GeForce
Product Usage Instructions
FAQ
Graphics Card Installation
Connecting display devices
Driver installation
FCC Statement
ASUS Contact Information
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

ASUS RTX 4080 ROG Strix GeForce

Specifications

Model: Q22444 Revised Edition V2
Language: English
Release Date: August 2023

Product Usage Instructions

A. Graphics Card Installation

Make sure your computer is completely unplugged from the power source, then remove the chassis cover and locate an open motherboard PCIe slot.
Remove chassis rear expansion slot covers according to the needs of your graphics card.
Insert the graphics card into the motherboard PCIe slot until a click is heard.
Secure the graphics card to the chassis with the required number of screws.
If your graphics card features auxiliary power connector(s), connect the PCIe power connectors from the power supply unit (PSU) to the graphics card. If your graphics card features an additional power adapter cable please make sure to use the adapter cable to connect the graphics card and the PSU.
Make sure to connect the display device to the graphics card.

B. Connecting Display Devices

Using any compatible cable, connect your display device to the graphics card. Supported interfaces include D-Sub, DVI, DisplayPort, and HDMI.

C. Driver Installation

Visit the ASUS support site at: https://www.asus.com/support/.
Download and install the latest driver for your graphics card.

FAQ

Does your power connector look different?

If your power connector looks different, please refer to the manual for specific details on how to handle different connector types.

NOTE: The illustrations in this document are for your reference only, they may not be of the same model as the one you purchased.

Graphics Card Installation

Make sure your computer is completely unplugged from the power source, then remove the chassis cover and locate an open motherboard PCIe slot.
Remove chassis rear expansion slot covers according to the needs of your graphics card.
Insert the graphics card into the motherboard PCIe slot until a click is heard.
Secure the graphics card to the chassis with the required number of screws.
If your graphics card features auxiliary power connector(s), connect the PCIe power connectors from the power supply unit (PSU) to the graphics card. If your graphics card features an additional power adapter cable please make sure to use the adapter cable to connect the graphics card and the PSU.
Make sure to connect the display device to the graphics card.

IMPORTANT! Please use separate PCIe cables for each graphics card power connection. Using both ends of a PCIe splitter-cable may cause damage.

Connecting display devices

Using any compatible cable, connect your display device to the graphics card.

Driver installation

Visit the ASUS support site at: https://www.asus.com/support/.
Download and install the latest driver.

Appendix

FCC Statement

Notices

FCC Compliance Information

Responsible Party: Asus Computer International
Address: 48720 Kato Rd., Fremont, CA 94538, USA
Phone / Fax No: (510)739-3777 / (510)608-4555

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference, and
this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

Australia statement notice

From 1 January 2012updated warranties apply to all ASUS products, consistent with the Australian Consumer Law. For the latest product warranty details please visit https://www.asus.com/support. Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. If you require assistance please call ASUS Customer Service 1300 2787 88 or visit us at https://www.asus.com/support.

ASUSTeK Computer Inc. hereby declares that this device is in compliance with the essential requirements and other relevant provisions of related Directives. Full text of EU declaration of conformity is available at: https://www.asus.com/support/.

Compliance Statement of Innovation, Science and Economic Development Canada (ISED)

This device complies with Innovation, Science and Economic Development Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:

this device may not cause interference, and
this device must accept any interference, including interference that may cause undesired operation of the device. CAN ICES-003(B)/NMB-003(B)

VCCI: Japan Compliance Statement

Class B ITE

KC: Korea Warning Statement

EU REACH and Article 33

Complying with the REACH (Registration, Evaluation, Authorisation, and Restriction of Chemicals) regulatory framework, we published the chemical substances in our products at ASUS REACH website at http://csr.asus.com/english/REACH.htm

EU RoHS

This product complies with the EU RoHS Directive. For more details, see http://csr.asus.com/english/article.aspx?id=35.

India RoHS

This product complies with the “India E-Waste (Management) Rules, 2016” and prohibits use of lead, mercury, hexavalent chromium, polybrominated biphenyls (PBBs) and polybrominated diphenyl ethers (PBDEs) in concentrations exceeding 0.1% by weight in homogenous materials and 0.01% by weight in homogenous materials for cadmium, except for the exemptions listed in Schedule II of the Rule.

Vietnam RoHS

ASUS products sold in Vietnam, on or after September 23, 2011,meet the requirements of the Vietnam Circular 30/2011/TT-BCT.

Simplified UKCA Declaration of Conformity

ASUSTek Computer Inc. hereby declares that this device is in compliance with the essential requirements and other relevant provisions of related Regulations. Full text of UKCA declaration of conformity is available at: https://www.asus.com/support/.

ASUS Contact Information

Manufacturer: ASUSTeK Computer Inc.
Global Website: https://www.asus.com
Authorized representative in United Kingdom: ASUSTEK (UK) LIMITED
Address: 1st Floor, Sackville House, 143-149 Fenchurch Street, London, EC3M 6BL , England, United Kingdom
Authorized representative in Europe: ASUS Computer GmbH
Address: Harkort Str. 21-23, 40880 Ratingen, Germany

Service and Support

Visit our multi-language website at https://www.asus.com/support.