artysan 97802400004 Free Standing Vanity Unit Instructions
- September 10, 2024
- artysan
Table of Contents
artysan 97802400004 Free Standing Vanity Unit
Specifications:
- Product Code: 97802400004
- Available Sizes: 500 mm, 600 mm, 700 mm, 800 mm, 900 mm, 1000 mm, 1200 mm
- Recommended Height: 84-86 cm (including washbasin)
Product Usage Instructions
Pre-Installation Checks:
Prior to installation, carefully read the Fitting Instructions. Ensure the
product is undamaged and free from manufacturing defects.
Safety Recommendations:
- Installation should be carried out by a qualified person.
- Check the wall’s strength for mounting and use suitable hardware.
- Follow all instructions in the manual to prevent injuries or accidents.
Installation Steps:
- For free-standing vanity units, follow the steps provided for proper assembly.
- Secure any additional wall mounting supports for units with divisions to avoid misalignments.
- Adjust the opening direction of doors for cabinets before hanging them on the wall.
Additional Tips:
If needed, remove the upper drawer to install the drain according to the
supplier’s instructions.
FAQ:
Q: What should I do if I notice any damage or defects in the product?
A: If you identify any faults, do not proceed with the installation
process and inform your distributor immediately.
Q: Can I mount the countertop myself if it’s not pre-assembled?
A: Yes, you can fix the countertop with silicone onto the furniture if
it’s not pre-mounted.
Q: What is the recommended height for installation?
A: The recommended height is 84-86 cm, including the washbasin.
Fitting instructions
Warning
Prior to installation, read carefully the Fitting Instructions and verify
that the product has not suffered damages during transport or have any
manufacturing defects. If any fault is noted, please do not continue with the
installation process and communicate it to your distributor.
Serious injury may result from improperly installed furniture and/or bathroom auxiliaries. To avoid injuries or accidents, you must follow the following recommendations:
- The installation must be done by a qualified person.
- Check the resistance of the wall where you intend to place the auxiliary and/or bathroom furniture and use the appropriate attachment hardware.
- Follow all instructions of this manual.
The manufacturer disclaims any liability for damage resulting from an inappropriate use or installation. Changes, printing and typesetting errors are reserved.
Free standing vanity unit
When the vanity has a division, add the 5th leg under the base of the furniture aligned with the division.
If necessary, remove the upper drawer to install the drain following the suppliers’ instructions.
Wall hung vanity unit
Recommended height: 84-86 cm (washbasin included).
When the furniture has a division,fix the additional wall mounting support to avoid misalignments.
If necessary, remove the upper drawer to install the drain following the suppliers’ instructions.
Ceramic sink
Countertop + sink
If the countertop is not mounted,fix it with silicone.
Tops + 100 cm
Cabinets & columns
If the fixing system is different from the one explained below,follow the steps in .
Choose the opening direction of the doors before hanging the cupboard on the wall.
Mounting legs if included.
It is essential to attach the wardrobe/column to the wall.
Metallic guide
Drawer removal: Push on the catch to release the drawer and stretch.
Drawer installation: Place the drawer on the runner and slide it into the vanity.
Front installation: Slide the front connector into the drawer.
Push down, you will hear a click.
Front removal: Press the blue button located on both drawer sides. Easy clean up of the drawer.
Complies with the 80.000 cycles required for furniture fitting.
“Cisne” guide
To place the drawer, follow up the same steps but inverted.
Unscrew the screw.
Remove the drawer
Hidden Guide
Drawer disassembly
- Unscrew the fixing screw [1] to unlock the drawer of the guide (star tip screw).
- Lift the drawer up and pull on the sense of openness of the drawer.
Drawer assembly and adjustment
- Support the drawer on the guides and fix the drawer with the attachment hook [2] in the hole the drawer has in its back part.
- Slightly drop the drawer to coincide the hole in the drawer with the attachment to adjust height [3].
- Graduate the thread [4] in the desired direction until the correct setting of the drawer is achieved.
- Place the fixing screw slightly [1] until the drawer is subjected to the guide.
Doors
Handlers
Mirrors
- Measure the distance between the holes of the 2 hanging plates.
- Mark the distance on the wall and make 2 holes.
- Place the dowels and hooks to the wall.
- Hang the mirror on the hooks with the help of another person.
Maintenance
MAINTENANCE ADVICES
For a greater durability and good maintenance of the product, it is
recommended to follow all steps:
Vanity unit and bathroom auxiliaries
For standard maintenance of the bathroom furniture, use a soft damp cloth with
non-abrasive products that do not contain chlorine,ammonia, solvent, or
chemical products so as not to damage the surfaces. Then, dry it with a dry
cloth. Surfaces exposed to moisture should be cleaned and dried as quickly as
possible to prevent moisture penetration inside the furniture.re.
Marble and natural stone countertop
For greater durability of marble and natural stone bathroom countertops,use
non-abrasive products to avoid damaging the material.
Chemical spills such as hair dyes and rinses must be removed quickly to avoid damaging the surface..
Ceramic basin
Ceramic sinks are easy to clean. Use a damp cloth with non-abrasive products
and a soap solution. Contact with metallic objects such as steel, titanium or
copper can cause gray or black discolorations.
P.I. Santa Rita, Carrer Òptica, 8,
08755 Castellbisbal, Barcelona.
93 772 08 50
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>