Outsunny 84A-118 Swing Chair Green Instruction Manual
- September 10, 2024
- Outsunny
Table of Contents
Outsunny 84A-118 Swing Chair Green
Product Information
Specifications
- Model: IN220901577VU0S2_CGAL_84A
- Version: IN220901577V02_GL_84A-118_84A-118V01
- Language: EN_IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY.
Product Usage Instructions
1. Introduction
Welcome to the product! This guide will help you understand how to use it effectively.
2. Setup
Begin by unpacking the product and ensuring all parts are included as per the manual.
3. Power On
Connect the product to a power source and turn it on using the designated power button.
4. Configuration
Follow the configuration steps outlined in the manual to set up the product according to your preferences.
5. Operation
Once set up, you can now start using the product for its intended purpose. Refer to the manual for specific instructions on operation.
FAQs
Q: What should I do if the product does not turn on?
A: Check the power source and ensure proper connection. If the issue persists, contact customer support.
Q: How often should I clean the product?
A: Regular cleaning is recommended. Refer to the manual for specific cleaning instructions based on usage.
IMPORTANT , RETAIN FOR FUTURE REFERENCE: READ CAREFULLY.
IMPORTANT , RETAIN FOR FUTURE REFERENCE: READ CAREFULLY.
Use tips
Only for domestic use :
- Put the chair stably on a flat floor.
- Mount the garden chairs in the shelter of the weather.
- Stay away from open flames.
- Don’t hang anything in the structure.
- Avoid the overload at the anchors/structure.
- It is advised that don’t stay on the chairs when there is a storm.
- Do not use in adverse weather conditions and cover furniture when not In use.
Precautions before assembly:
- Prepare a clean and dry mounting area.
- Verify that the product is not damaged.
- Check that none of the pieces are missing.
Maintenance
- Clean with a soft fabric.
- Regularly remove leaves and/or water collected on the canvas.
- Check the chair regularly. Storage conditions:
- The fabric should be stored completely dry, in a clean and dry place to avoid the risks of mold.
Caution with the risks of pinching or cuts during assembly. The manufacturer declines all responsibility in case of damages due to a bad installation or due to weather.
PARTS
HARDWARE
INSTALLATION
Do not confuse similar screws. Do not tighten bolts fully until all parts are connected!
CONTACT INFORMATION
US
If you have any questions, please contact our customer care center.
- Our contact details are below:
- 001-877-644-9366
- customerservice@aosom.com
- Imported by Aosom LLC
- 27150 SW Kinsman Rd Wilsonville, OR 97070 USA
- MADE IN CHINA
UK
If you have any questions, please contact our customer care center.
- Our contact details are below:
- 0044-800-240-4004
- enquiries@mhstar.co.uk
- IMPORTER ADDRESS: MH STAR UK LTD
- Unit 27, Perivale Park,
- Horsenden lane South
- Perivale, UB6 7RH
- MADE IN CHINA
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>