Dangbei N2 Smart Projector User Manual

: September 10, 2024
: Dangbei

Dangbei N2 Smart Projector

Product Information

Specifications:

Product: N2 Smart Projector
Power Source: Power Adapter
Remote Control: AAA batteries
Interface: HDMI, 3.5mm Audio, 2x USB 2.0
Projection Size: 60 inches to 120 inches

Product Usage Instructions

Projector Overview
The N2 Smart Projector comes with various features and interfaces:

Lens for projection
Ventilation holes (Do not block)
An adjustable kickstand and PTZ bracket socket for positioning
Interfaces like DC IN, HDMI, 3.5mm Audio, and 2x USB 2.0
The power button for turning the projector on/off

Remote Control Overview
The remote control allows you to conveniently operate the projector:

Power button to turn the projector on/off
Navigation buttons for moving around menus
Volume control buttons
App buttons for video streaming
Mute button to temporarily cut off the sound
OK button for confirming selections or entries
Focus shortcut for manual and autofocus
Menu button for accessing settings

Getting Started

Placement: Position the projector on a stable, flat surface in front of a white projection surface.
Power On: Connect the projector to the power outlet and press the power button to turn it on.
Remote Control Pairing: Place the remote control near the projector for pairing by following the on-screen instructions.

FAQ:

Q: What should I do if the remote control pairing is unsuccessful?
A: If pairing is unsuccessful, repeat the pairing steps until the indicator light stops flashing.

Read before Use

Please read the product instructions carefully:

Thank you for purchasing and using these products.
For your safety and interests, please read the Product Instructions carefully before using the product.

About the Product Instructions:

The trademarks and names mentioned in the Product Instructions are the property of their respective owners.
All Product Instructions shown are for illustration purposes only. The actual product may vary due to product enhancements.
We shall not be liable for any personal injury, property damage, or other damages caused by the failure of the user to comply with the
Product Instructions or precautions.

Dangbei reserves the right to interpret and modify the Product Instructions.

Packing List

Before using this product, please check that all items are included in the box.

Projector Overview

Overview and interface description.

Remote Control Overview

Open the battery compartment cover of the remote control.
Install 2 AAA batteries *.
Put back the battery compartment cover.

Please insert new batteries according to the polarity indication.

Getting Started

Placement
- Position the projector on a stable, flat surface in front of the projection surface. A flat and white projection surface is recommended.
- Please follow the instructions below to determine the distance between the projector and the projection surface, and the corresponding projection size:
- Size Screen (Length × Width)
- 60 inches 133 x 75 cm 4.36×2.46 ft
- 80 inches 177 x 100 cm 5.8x 3.28 ft
- 100 inches 221 x 124 cm 7.25 x 4.06 ft
- 120 inches 265 x 149 cm 8.69 x 4.88 ft
  The best-recommended projection size is 100 inches.
Power on
Connect the projector to the power outlet.
Press the power button on either the projector or the remote control to turn on the projector.
Remote Control Pairing
- Place the remote control within 10 cm of the projector.
- For first-time use, follow the on-screen projector instructions:
- Simultaneously press and hold the [Volume Down] and [Right] buttons until the indicator light begins to flash. (This means that the remote control is entering pairing mode.)
- The connection is successful when the indicator light stops flashing.
- If the pairing is unsuccessful, repeat the above steps until the remote control indicator light stops flashing.

Network Settings
Go to [Settings] — [Network].

Focus Settings

Go to [Settings] — [Focus].
To use Autofocus, select [Auto], and the screen will automatically become clear.
To use Manual focus, select [Manual], and use the up/down buttons on the navigation keys of the remote control to adjust the focus based on what is displayed.

Image Correction Settings

Keystone Correction
- Go to [Settings] — [Keystone].
- To use Auto keystone correction, select [Auto], and the screen will automatically be corrected.
- To use Manual keystone correction, select [Manual] to adjust the four points and the image shape.
Intelligent Screen Fit
- Go to [Settings] — [Keystone], and turn on [Fit to Screen].
- Follow the on-screen instructions to automatically adjust the projected image to fit the screen.
Intelligent Obstacle Avoidance
- Go to [Settings] — [Keystone] — [Advanced], and turn on [Avoid Obstacles].
- Follow the on-screen instructions to automatically adjust the projected image to avoid any objects on the projection surface.

Bluetooth Speaker Mode

Open the Bluetooth Speaker application on the device.
Turn on the Bluetooth of your mobile phone/tablet/laptop, select the device of [Dangbei_PRJ], and connect to it.
Use the projector to play audio from the devices mentioned above, or connect the projector to a speaker/headphone to play the audio from the projector.

Screen Mirroring & Casting

Mirrorcast
To mirror the screen of an Android/Windows device to the projector, open the app Mirrorcast, and follow the on-screen instructions.
Homeshare
To stream content from an iOS/Android device to the projector, open the app Homeshare, and follow the on-screen instructions.

Mirrorcast does not support iOS devices. Homeshare only supports apps with DLNA protocol.

Inputs

Go to [Inputs] — HDMI/HOME/USB.
Watch the content from the different signal sources.
- This product’s HDMI interface is HDMI 1.4 and does not support 4K video signal input.

More Settings

Picture Mode
Go to [Settings] — [Picture Mode] to choose a picture mode from [Standard/Custom/Cinema/Sport/Vivid].
Sound Mode
Go to [Settings] — [Audio] to choose a sound mode from [Standard/Sport/Movie/Music].
Projection Mode
Go to [Settings] — [Projection] to choose the placement method of the projector.
Zoom
Go to [Settings] — [Zoom] to decrease the image size from 100% to 50%.
Product Info
Go to [Settings]– [About] to check the product information.

Specifications

Display Technology LCD
Display Resolution 1920 × 1080
Throw Ratio 1.26:1
Speakers 2 × 6 W
Bluetooth Version 5.0
WI-FI Dual Frequency 2.4/5.0 GHz
Dimensions (L x W x H) 197 × 130 x 207 mm 7.76 x 5.12 x 8.15 inches
Weight 2.2kg/4.85lb

Troubleshooting

No audio output
- Check if the remote control “Mute” button is pressed.
- Check if the projector interface “3.5mm Audio”, “HDMI” or Bluetooth is connected to an external audio device.
No image output
- Press the power button on the top cover. The power button indicator light will turn off if the projector is powered on successfully.
- Ensure that the power adaptor has power output.
No network
- Enter settings, and check the network connection status in the network option.
- Ensure that the router is correctly configured.
Blurry Image
- Adjust the focus or keystone.
- The projector and screen/wall must be positioned at an effective distance.
- The projector lens is not clean.
Non-rectangular Image
- Place the projector perpendicular to the screen/wall if the keystone correction function is not used.
- Use the keystone correction function to adjust the display.
Automatic keystone correction failed
- Ensure that the Camera on the front panel is not blocked or dirty.
- The best automatic keystone correction distance is 1.3-3.0 m, horizontal ±20°.
Autofocus failure
- Ensure that the Camera on the front panel is not blocked or dirty.
- The best autofocus distance is 1.3-3.0 m, horizontal ±20°.
The Remote Control is unresponsive
- Ensure that the remote control is successfully paired via Bluetooth connection. If the pairing is successful, the indicator light will not flash when the button is pressed.
- If the pairing is unsuccessful, and the Remote Control is at IR communication, the indicator light will flash when the button is pressed.
- Ensure that there are no interferences or obstructions between the projector and the remote control.
- Check the battery and installation polarity.
Connect the Bluetooth devices
Enter settings, open the Bluetooth option to check the Bluetooth device list, and connect the device.
Others
Please feel free to contact us at support@dangbei.com.

Important Precautions

As with any bright source, do not stare into the direct beam, RG1 IEC 62471-5:2015
Do not block or cover the heat dissipation holes of the device to avoid affecting the heat dissipation of internal parts and damaging the device.
Keep away from humidity, exposure, high temperature, low pressure, and magnetic environment.
Do not place the device in areas susceptible to excessive dust and dirt.
Put the device in a flat and stable station, do not put it in a place prone to vibration.
Do not allow children to handle the device without supervision.
Do not place heavy or sharp objects on this device.
Avoid extreme vibrations as they may damage the internal components.
Please use the correct type of battery for the remote control.
Only use attachments/accessories specified or provided by the manufacturer. (such as the exclusive power adapter, bracket, etc)ㆍDo not disassemble the device personally, repair the device only for staff authorized by the company.
Place and use the device in an environment of 0°C-40°C.
Do not use the earphones for a long time. Excessive sound from the earphones can damage your hearing.
The plug is considered as a disconnect device of the adapter.
As with any bright source, do not stare into the direct beam.
The adapter shall be installed near the equipment and shall be easily accessible.
Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from this device.
Unplug this device if there are lightning storms or when unused for a long period.
Where the power plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.
Before you make or change any connections, ensure that all devices are disconnected from the power outlet.
Never touch the power cable or the power connector with wet hands.

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used under the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

We declare that this device complies with the essential requirements and other relevant provisions of Directive 2014/53/EU. Satisfies all the technical regulations applicable to the product within the scope of UK Radio Equipment Regulations (SI 2017/1206); UK Electrical Equipment (Safety) Regulations (SI 2016/1101); and UK Electromagnetic Compatibility Regulations (SI 2016/1091). This device operating frequency:2402-2480MHz(EIRP＜20dBm),2412-2472MHz(EIRP＜20dBm),5150~5250MHz(EIRP＜23dBm), 5250~5350MHz(EIRP＜20dBm),5470~5725MHz(EIRP＜27dBm),5725~5850MHz(EIRP＜13.98dBm).

Manufactured under license from Dolby Laboratories. Dolby, Dolby Audio, and the double-D symbol are trademarks of Dolby Laboratories Licensing Corporation.

CAN ICES-3 (B)/NMB-3 (B)
This Class B digital apparatus complies with Canadian ICES-003.

This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science, and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions:

This device may not cause interference.
This device must accept any interference, including interference that may be caused. undesired operation of the device

For projectors only
The distance between the user and the products should be no less than 20cm.

5150-5350MHz band is restricted to indoor use only.

We simply act as UK representatives for cross-border sellers and are not manufacturers/importers/distributors for the product, nor involved in the manufacture/import/sale of the product. Therefore, we are not responsible for any after-sales services related to the product. ln case of any product quality or infringement issues, the manufacturer/importer/seller shall be solely held responsible.

EVATOST CONSULTING LTD

UK/REP

Suite 11, First Floor, Moy Road Business Centre, Taffs Well, Cardiff, Wales, CF15 7QR
contact@evatmaster.com.

We simply act as EU representatives for cross-border sellers and are not manufacturers/importers/distributors of the product, nor involved in the manufacture/import/sale of the product. Therefore, we are not responsible for any after-sales services related to the product. In case of any product quality or infringement issues, the manufacturer/importer/seller shall be solely held responsible.

eVatmaster Consulting GmbH

EU/REP

Bettinaster. 30 60325 Frankfurt am Main, Germany
contact@evatmaster.com.

DECLARATION OF CONFORMITY

EU DECLARATION OF CONFORMITY

Product: Smart Projector
Trademark: Dangbei
Model Designation: N2
Manufacturer’s Name: Shenzhen Dangs Science and Technology Co., Ltd.
Manufacturer’s Address: 901, GDC Building, Gaoxin Mid 3nd Road, Maling Community, Yuehai Sub-district, Nanshan District, Shenzhen, China.
Manufacturer’s Phone: 86-755-26907499

We, Shenzhen Dangs Science and Technology Co., Ltd. declare under our sole responsibility that the above-referenced product conforms with the applicable requirements of the following directives:

RED Directive: 2014/53/EU
WEEE Directive: 2012/19/EU
RoHS Directive: 2011/65/EU (EU) 2015/863
REACH Regulation: 2006/1907/EC

Conformity with these directives has been assessed for the product by demonstrating compliance with the following harmonized standards and/or regulations:

EN 62311:2008
EN 301489-3 V2.3.2 (2023-01)
EN 55035:2017+A11:2020
EN 301893 V2.1.1 (2017-05)
2011/65/EU， (EU) 2015/863
EN IEC 62368-1:2020+A11:2020
EN 301489-17 V3.2.4 (2020-09)
EN 61000-3-2:2019+A1:2021
EN 300440 V2.1.1 (2017-03)
2006/1907/EC
EN 301489-1 V2.2.3 (2019-11)
EN 55032:2015+A11:2020
EN 61000-3-3:2013+A2:2021
EN 300328 V2.2.2 (2019-07)
2012/19/EU

Signed for and on behalf of Shenzhen Dangs Science and Technology Co., Ltd.

Place: Shenzhen, China
Date: 2024-02-07
Name: Libing Zhang
Position: Certification Engineer
Signature:

UKCA DECLARATION OF CONFORMITY

Product: Smart Projector
Trademark: Dangbei
Model Designation: N2
Manufacturer’s Name: Shenzhen Dangs Science and Technology Co., Ltd.
Manufacturer’s Address: 901, GDC Building, Gaoxin Mid 3nd Road, Maling Community, Yuehai Sub-district, Nanshan District, Shenzhen, China.
Manufacturer’s Phone: 86-755-26907499

We, Shenzhen Dangs Science and Technology Co., Ltd. declare under our sole responsibility that the above-referenced product conforms with the applicable requirements of the following directives:

RoHS Directive: SI 2022 No.622
RED Directive: SI 2017 No.1206
REACH Directive: SI 2019 No.758
PSTI Directive: SI 2023 No.1007

Conformity with these directives has been assessed for the product by demonstrating compliance with the following harmonized standards and/or regulations:

BS EN IEC 62311:2008
ETSI EN 301489-3 V2.3.2 (2023-01)
BS EN 55035:2017+A11:2020
ETSI EN 301893 V2.1.1 (2017-05)
SI 2022 No.622
ISO/IEC 29147:2018
BS EN IEC 62368-1:2020+A11:2020
ETSI EN 301489-17 V3.2.4 (2020-09)
BS EN 61000-3-2:2019+A1:2021
ETSI EN 300440 V2.1.1 (2017-03)
SI 2019 No.758 and its amendment(UK REACH)
ETSI EN 301489-1 V2.2.3 (2019-11)
BS EN 55032:2015+A11:2020
BS EN 61000-3-3:2013+A2:2021
ETSI EN 300328 V2.2.2 (2019-07)
EISI EN 303 645 V2.1.1(2020-06)

Signed for and on behalf of Shenzhen Dangs Science and Technology Co., Ltd.

Place: Shenzhen, China
Date: 2024-02-07
Name: Libing Zhang
Position: Certification Engineer
Signature:

Smart Projector

Model: N2
Input: 19V 6.32A ,120.08W
USB Output: 5V 1A
Manufacturer: Shenzhen Dangs Science and Technology Co., Ltd.
Address: 901, GDC Building, Gaoxin Mid 3nd Road, Maling Community, Yuehai Sub-district, Nanshan District, Shenzhen, China.