Dangbei DBOX02 4K Projector GTV User Manual
- August 10, 2024
- Dangbei
Table of Contents
- Dangbei DBOX02 4K Projector GTV User Manual
- Read before Use
- Packing List
- Projector Overview
- Remote Control Overview
- Getting Started
- Network Settings
- Focus Settings
- Image Correction Settings
- Bluetooth Speaker Mode
- Google Assistant
- Chromecast built-in™
- Screen Mirroring
- Inputs
- More Settings
- Specifications
- Troubleshooting
- Important Precautions
- Statement
- EU DECLARATION OF CONFORMITY
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Dangbei DBOX02 4K Projector GTV User Manual
Read before Use
Please read the product instructions carefully:
Thank you for purchasing and using these products.
For your safety and interests, please read the Product Instructions carefully
before using the product.
About the Product Instructions:
The trademarks and names mentioned in the Product Instructions are the
property of their respective owners.
All Product Instructions shown are for illustration purposes only. The actual
product may vary due to product enhancements.
We shall not be liable for any personal injury, property damage, or other
damages caused by the failure of the user to comply with the Product
Instructions or precautions.
Packing List
Before using this product, please check that all items are included in the box.
Projector Overview
Overview and interface description.
Remote Control Overview
-
Open the battery compartment cover of the remote control.
-
Install 2 AAA batteries *.
-
Put back the battery compartment cover.
-
Please insert new batteries according to the polarity indication.
Getting Started
1. Placement
Position the projector on a stable, flat surface in front of the projection
surface. A flat and white projection surface is recommended.
Please follow the instructions below to determine the distance between the
projector and the projection surface, and the corresponding projection size:
2. Power on
3. Standby Mode / Power off
Press the power button on the projector or remote control to enter standby
mode.
Press and hold the power button on the projector or remote control for 2
seconds to turn off the projector.
4. Remote Control Pairing
Network Settings
- Go to [Settings], select [Network & Internet], and turn on Wi-Fi.
- Choose your network and enter the correct password.
Focus Settings
Method 1: Press the red side key (up) for manual focus. Press and hold for 2
seconds for autofocus.
Method 2: Go to [Projector], select [Focus], and choose either manual focus or
autofocus
Autofocus
Select [Auto Focus] to trigger the autofocus function.
The image will automatically become clear.
Manual focus
Select [Manual Focus] and use the navigation keys (up / down) on the remote
control to adjust the focus distance and make the image clear.
Image Correction Settings
- Keystone Correction
ㆍGo to [ Projector] — [Image Correction].
ㆍSelect [Auto Keystone Correction], and the screen will automatically be corrected.
ㆍSelect [Manual Keystone Correction], and use navigation keys to adjust the four points and the image shape.
2. Intelligent Screen Fit
- Go to [Projector] — [Image Correction], and turn on [Fit to Screen].
- Follow the on-screen instructions to automatically adjust the projected image to fit the screen.
3. Intelligent Obstacle Avoidance
- Go to [Projector] — [Image Correction] — [Advanced], and turn on [Avoid Obstacles].
- Follow the on-screen instructions to automatically adjust the projected image to avoid any objects on the projection surface.
Bluetooth Speaker Mode
- Go to [Settings], select [Projector], and click on [Bluetooth speaker mode].
- Connect your phone to a device with the Bluetooth name containing “DBOX02”.After modifying the device name, the Bluetooth name will also be synchronized accordingly.
- When you hear “Bluetooth connection successful”, the projector can play music from your phone.
Google Assistant
Your TV is more helpful than ever. Use your voice to find movies, stream apps, play music and control the TV. Ask Google Assistant to find a specific title, search by genre, or get personalized recom-mendations. Even get answers on screen, control smart home devices, and more. Press the Google Assistant button on the remote to get started.
Chromecast built-in™
Easily cast movies, shows, photos, and more from your phone or tablet, right to your TV.
To cast in-app content:
Simply tap the Cast button from apps you already know and love. No new logins
or downloads required.
Screen Mirroring
You can project the entire screen from your device to the projector. To cast the device screen:
- Ensure that both your device and the projector are connected to the same wireless network.
- Install the AirScreen app on the projector.
- Open the AirScreen app and follow the on-screen instructions to complete the process.
Inputs
HDMI
Insert the HDMI device into the HDMI port.
Go to [Inputs] ,select the HDMI option.
USB Drive
Download the File Explorer app from Google Play. Insert a USB-A dirve into the
USB port.
Open the app and find the USB drive,select the content which you want to play.
- USB format supported:FAT32,NTFS
More Settings
-
Projection Mode
Go to [Settings] — [Projector]– [Advanced Settings] — [Projection Mode] to choose the placement method of the projector. -
Zoom
Go to [Settings] — [Projector] — [Image Correction] — [Image Adaption] to decrease the image size from 100% to 50%. -
3D Mode
After playing the video,press and hold the Home button,a dashboard in the upper right corner of the screen.
On dashboard,go to [Picture] — [3D Mode],according to the format of the 3D video, select the corresponding 3D option. -
System & Product Info
Go to [Settings] — [System] — [About] to check the System & Product information.
Specifications
Troubleshooting
-
No audio output
a. Check if you have double-clicked the black side key on the remote control to put the projector in mute mode.
b. Check if the projector interface “HDMI ARC” or Bluetooth is connected to an external audio device. -
No image output
a. Press the power button located on the rear of the projector. The power button indicator light will turn off if the projector enters projection mode successfully.
b. Ensure that the power adaptor has power output. -
No network
a. Enter settings, and check the network connection status in the network option.
b. Ensure that the network cable is correctly inserted to the projector interface “LAN”.
c. Ensure that the router is correctly configured. -
Blurry Image
a. Adjust the focus or keystone.
b. The projector and screen/wall must be positioned with an effective distance.
c. Projector lens is not clean. -
Non-rectangular Image
a. Place the projector perpendicular to the screen/wall if keystone correction function is not used.
b. Use the keystone correction function to adjust the display. -
Automatic keystone correction failed
a. Ensure that the Camera/TOF on the front panel is not blocked or dirty.
b. The best automatic keystone correction distance is 2.0-4.0m, horizontal ±30°. -
Autofocus failure
a. Ensure that the Camera/TOF on the front panel is not blocked or dirty.
b. The best autofocus distance is 2.0-4.0m, horizontal ±20°. -
Smart Eye Protection failed
a. Ensure that the Camera/TOF on the front panel is not blocked or dirty
b. The optimal sensing range is located around the center of the image. Being too close to the edges may result in the eye protection
feature not triggering. -
Intelligent Screen Fit failure
a. Ensure that the projector is correctly positioned, so that the projected image extends beyond the edges of the screen.
b. Ensure that the projection screen has a colored border/frame on all four sides, so that the projector can recognize the frame.
c. Ensure that the red box pattern is within the screen frame, and is not blocked. -
The Remote Control is unresponsive
a.Ensure that the remote control is successfully paired via Bluetooth. If the pairing is successful, the LED light will flash once when you press any button. When you press and hold any button, the LED light will remain solid.
b.If the pairing is unsuccessful, the LED light will flash three times when you press any button. When you press and hold any button, the LED light will flash three times and then remain solid.
c. Check if the power indicator is still on without pressing any buttons. If it is, check the status of the remote control buttons to ensure they are not being pressed.
d. Ensure that there are no interferences or obstructions between the projector and remote control.
e. Check the battery and installation polarity. -
Connect the Bluetooth devices
Enter settings,open the [Remotes&Accessories] to pair more bluetooth devices. -
Others
Please feel free to contact us at support@dangbei.com
Important Precautions
- As with any bright source, do not stare into the direct beam,RG2 IEC 62471-5:2015
- Users are aware of the risk of skin or corneal burns. CLASS 1 LASER PRODUCT,Comply with IEC 60825-1:2014.
- Do not block or cover the heat dissipation holes of the device to avoid affecting the heat dissipation of the internal parts, and damaging the device.
- Keep away from humidity, exposure, high temperature, low pressure, and magnetic environments.
- Do not place the device in areas susceptible to excessive dust and dirt.
- Place the device in a flat and stable station, and do not place the device on a surface that is prone to vibration.
- Do not allow children to handle the device without supervision.
- Do not place heavy or sharp objects on the device.
- Avoid extreme vibrations, because these may damage the internal components.
- Please use the correct type of battery for the remote control.
- Only use attachments/accessories specified or provided by the manufacturer (such as the exclusive power adapter, bracket, etc.).
- Do not disassemble the device. The device should only be repaired by staff authorized by the manufacturer.
- Place and use the device in a 5-35°C environment.
- The metal casing is coated with insulating paint.
- The plug is considered as a disconnected device of the adapter.
- The adapter should be installed near the equipment, and should be easily accessible.
- Protect the power cord from being walked on or pinched, particularly at the plugs, convenience receptacles, and the point where this exits from the device.
- Unplug this device if there are lightning storms or when unused for a long period of time.
- Where the power plug or an appliance coupler is used to disconnect the device, the disconnected device would remain readily operable.
- Never touch the power cable or power connector with wet hands.
- Risk of explosion if battery is replaced by an incorrect type.Dispose of used batteries according to local regulations.
Statement
Google TV is the name of this device’s software experience and a trademark of
Google LLC.
Google, YouTube and Chromecast built-in are trademarks of Google LLC.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules.These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.
This equipment generates uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation.If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
We declare that this device is in compliance with the essential requirements
and other relevant provisions of Directive 2014/53/EU.
Satisfies all the technical regulations applicable to the product within the
scope of UK Radio Equipment Regulations (SI 2017/1206);
UK Electrical Equipment (Safety) Regulations (SI 2016/1101); and UK
Electromagnetic Compatibility Regulations (SI 2016/1091).
This device operating
frequency:2402-2480MHz(EIRP<20dBm),2412-2472MHz(EIRP<20dBm),5150~5250MHz(EIRP<23dBm),
5250~5350MHz(EIRP<20dBm),5470~5725MHz(EIRP<27dBm),5725~5850MHz(EIRP<13.98dBm).
THIS DEVICE COMPLIES WITH DHHS RULES 21 CFR CHAPTER I SUBCHAPTER J.
CAN ICES-3 (B)/NMB-3 (B)
This Class B digital apparatus complies with Canadian ICES-003.
This device contains licence-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science and Economic Development Canada’s licence-exempt
RSS(s). Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may
cause. undesired operation of the device
For projectors only
The distance between user and products should be no less than 20cm.
5150-5350MHz band is restricted to indoor use only.
WARNING: This product can expose you to Lead,which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
EU DECLARATION OF CONFORMITY
Product : Smart Projector
Trademark : Dangbei
Model Designation : DBOX02
Manufacturer’s Name : Shenzhen Dangs Science and Technology Co., Ltd.
Manufacturer’s Address : 901, GDC Building, Gaoxin Mid 3nd Road, Maling
Community, Yuehai Sub-district, Nanshan District, Shenzhen,China.
Manufacturer’s Phone : 86-755-26907499
We, Shenzhen Dangs Science and Technology Co.,Ltd.declare under our sole
responsibility that the above referenced product is in conformity with the
applicable requirements of the following directives:
RED Directive : 2014/53/EU RoHS Directive : 2011/65/EU (EU) 2015/863
WEEE Directive : 2012/19/EU REACH Regulation : 2006/1907/EC
Conformity with these directives has been assessed for the product by demonstrating compliance to the following harmonized standards and/or regulations:
EN 62311:2008
EN 301489-3 V2.3.2 (2023-01)
EN 55035:2017+A11:2020
EN 301893 V2.1.1 (2017-05)
2011/65/EU, (EU) 2015/863
EN IEC 62368-1:2020+A11:2020
EN 301489-17 V3.2.4 (2020-09)
EN 61000-3-2:2019+A1:2021
EN 300440 V2.1.1 (2017-03)
2006/1907/EC
EN 301489-1 V2.2.3 (2019-11)
EN 55032:2015+A11:2020
EN 61000-3-3:2013+A2:2021
EN 300328 V2.2.2 (2019-07)
2012/19/EU
Signed for and on behalf of: Shenzhen Dangs Science and Technology Co., Ltd.
Place: Shenzhen, China Date: 2024-02-07
Name: Libing Zhang
Position: Certification Engineer
Signature:
UKCA DECLARATION OF CONFORMITY
Product : Smart Projector
Trademark : Dangbei
Model Designation : DBOX02
Manufacturer’s Name : Shenzhen Dangs Science and Technology Co., Ltd.
Manufacturer’s Address : 901, GDC Building, Gaoxin Mid 3nd Road, Maling
Community, Yuehai Sub-district, Nanshan District, Shenzhen,China.
Manufacturer’s Phone : 86-755-26907499
We, Shenzhen Dangs Science and Technology Co.,Ltd.declare under our sole
responsibility that the above referenced product is in conformity with the
applicable requirements of the following directives:
RoHS Directive : SI 2022 No.622
REACH Directive : SI 2019 No.758
RED Directive : SI 2017 No.1206
PSTI Directive : SI 2023 No.1007
Conformity with these directives has been assessed for the product by demonstrating compliance to the following harmonized standards and/or regulations:
BS EN IEC 62311:2008
ETSI EN 301489-3 V2.3.2 (2023-01)
BS EN 55035:2017+A11:2020
ETSI EN 301893 V2.1.1 (2017-05)
SI 2022 No.622
ISO/IEC 29147:2018
BS EN IEC 62368-1:2020+A11:2020
ETSI EN 301489-17 V3.2.4 (2020-09)
BS EN 61000-3-2:2019+A1:2021
ETSI EN 300440 V2.1.1 (2017-03)
SI 2019 No.758 and its amendment(UK REACH)
ETSI EN 301489-1 V2.2.3 (2019-11)
BS EN 55032:2015+A11:2020
BS EN 61000-3-3:2013+A2:2021
ETSI EN 300328 V2.2.2 (2019-07)
EISI EN 303 645 V2.1.1(2020-06)
Signed for and on behalf of: Shenzhen Dangs Science and Technology Co., Ltd.
Place : Shenzhen, China
Date : 2024-02-07
Name : Libing Zhang Position : Certification Engineer
Signature :
Customer Support : support@dangbei.com
For FAQs, user guides in multiple languages to download,and more information,
please visit us.dangbei.com
Read More About This Manual & Download PDF:
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>