INGA MZ-628 Wearable Mini Speaker User Manual

INGA MZ-628 Wearable Mini Speaker

Safety Instructions

• Read all instructions and save them for Mure reference
• Do not place it near a heat source. Avoid using radiators, stoves, and other equipment that can generate heat Avoid long-term exposure lo sunlight and high temperatures
• Please note that when Bluelooth is disconnected for 10 minutes, the speaker will enter sleep mode and shut down.To restart the speaker; press the power swilcillmode button.

Packaging Content

• Speaker
• USB data cable
• User manual

Product Parameters

• Working hours: 4-6hours
• SNR: >95dB
• Wireless distance: ≤10m
• Frequency: 200Hz-20KHz
• Bluetooth version: V5.4
• Battery capacity: 600mAh
• Charging time: 1-2hours
• Working voltage: DC 3.7V
• Rated power: 5W
• Waterproof grade: IP67
• Product size: 477534mm
• Net weight: 64g

Product Description

1. Volume up key single press for volume up, long press for the next song.
2. Power switch/mode Press and hold for 3 seconds to turn on/off: V\lhen there is an incoming call, short press to answer the call. long press to reject the call; During a call, short press to end the call; In Bluetooth mode, short press play/pause. Double click lo forcibly disconnect the Bluetooth connection and enter pairing mode
3. Volume down key: single press for volume down, long press for the previous song.
4. Power interface: DC 5V
5. Work/charging indicator light (blue/red light)
6. Clip
7. Mic (Environmental Noise Cancellation)

Operation Instructions

Step 1

• Press and hold the power button “ ” ‘for 3 seconds to activate Bluetooth mode. The blue light will flash, indicating the speaker is ready to pair with your mobile device.

Step 2

• Turn on the Bluetooth function on your phone or other Bluetooth device, and then search for a speaker named MZ-628. Connect to the speaker.

Step 3

• After successful pairing, there will be a prompt sound and the blue indicator light will remain on.

Step 4

• Play music on your phone. When playing music, the blue indicator light will remain on.

Step 5

• Connecting the Speaker to a New Device: Double-click the power button “ ” to enter pairing mode, indicated by a slow-blinking blue light. The speaker auto-reconnects to the last device upon powering on, and turns off after 10 minutes if not connected.

Connection Memory Function

• If the device’s Bluetooth feature is enabled, the speaker will automatically connect to the last paired device upon powering on.
• Double-click the Power button “ ” to disconnect the current device, and double-click again to reconnect current device.

Charging Tips

• When the battery is low, the speaker will sound a 1varning sound and need to be charged
• The red indicator light remains on during charging, but goes off when fully charged
• It is recommended to charge products with lithium batteries every three months when not in use

Shutdown and Battery Remmder

• Press and hold the pov:er button “ ” for 2. seconds to shut down and hear the battery percentage

Call Function

• Answering Calls When the speaker is connected to your phone, you can answer incoming calls by briefly pressing the play/pause button “ ” •
• Rejecting Calls: To reject an incoming call while the speaker is connected to your phone, press and hold the play/pause but1011 “ “
• Ending Calls: During a call, press the play / pause button “ ‘” briefly to hangup.

Scope Of Application

Support Information

Need further help. you can contact us by

• Service Email: inwa_support@innosystemtech.com

• or Scan the QR code for quick contact.

• or contact us on Amazon:

  1. Go lo Your Orders
  2. Find your order.
  3. Select “Problem with order.'”
  4. Choose your topic. then select ‘”Contact seller.'”

SUCCESS COURIER SL CALLE RIO TORMES NUM.1, PLANTA 1, DERECHA, OFICINA 3, Fuenlabrada, Madrid, 28947 Spain
OST_EU_20230424000022 successservice2@hotmail.com
We simply act as EU representative for cross-border sellers, and are not manufacturers/importers/distributors for the product, nor involved in the manufacture/import/sale of the product.
Therefore, we are not responsible for any after-sales services related to the product. In case of any product quality or infringement issues, the manufacturer/importer/seller shall be solely held responsible.

FCC WARNING

This device complies with part 15 of the FCC Rules.

Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>