HP-8003 Headphone Instructions
- September 9, 2024
- HP
Table of Contents
HP-8003 Headphone
Product Information
Specifications
- Version: V5.4
- Transmission range: 10M
- Frequency range: 20Hz-20kHz
- Speaker: 40mm
- Impedance: 32 Ohms
- Working time: 18hrs
- Standby time: 25hrs
- Battery capacity: 350mAh
Product Usage Instructions
Wireless Mode/TF Card Mode Switching
- Click once: Switch between Wireless mode/TF card mode
LED Light Control
- Click twice quickly: LED light on/off (In the case of product with light)
Voice Assistant Activation
- Press hold 2s: Voice assistant wake-up
- Volume Adjustment and Track Control
- Volume Down: Click once
- Volume Up: Click once
- Previous Track: Press and hold Volume Down
- Next Track: Press and hold Volume Up
Call Functions
- Play/Pause/Answer/Hang up Call: Click once
- Answer/Hang up Incoming Call: Press and hold
Pairing Record Clearing
Press and hold +/- simultaneously for 3s: Clear the pairing record
Charging Reminder
If the headphone is not used for a long time, it is recommended to fully
charge the headphone every month to extend the battery life.
Accessories
- Headphone*1
- Type-C charging cable*1
- Audio cable*1
- User manual*1
Frequently Asked Questions (FAQ)
-
How to switch between Wireless mode and TF card mode?
To switch modes, simply click the button once. -
How do I control the LED light?
If your product has an LED light, you can turn it on or off by quickly clicking the button twice. -
How can I activate the voice assistant?
To activate the voice assistant, press and hold the button for 2 seconds.
INSTRUCTIONS
- Click once: Switch between Wireless mode/TF card mode
- Click twice quickly: LED light on/off (In the case of product with light)
- Press hold 2s: Voice assistant wake-up
- Click once: Volume down
- Press and hold: Previous track
- Click once: Volume up
- Press and hold: Next up track
- Press and hold +/- at the same time 3s to clear the pairing record
- Press and hold: Turn on/off/reject the incoming call
- Click once: Play/pause/answer the call/hang up the call
Accessories
Contents: Headphone1, Type-C charging cable1, Audio cable1, user manual1
Wireless technology
With wireless technology, you can connect your headphone to a compatible communication device without using a cable. The wireless connection does not require the phone and the headphone to face each other, but the maximum distance between the two should not exceed 10 meters (about 30 feet), and the wireless connection may be disturbed by obstacles such as walls or other electronic devices.
- Pairing name: H EADPHONE
Specifications
- Version: V5.4
- Transmission range: 10M
- Frequency range: 20Hz-20kHz
- Speaker: 40mm
- Impedance: 32 Ohms
- Working time: ≈18hrs
- Standby time: ≈25hrs
- Battery capacity: 350mAh
Warm prompt of headphone charging
If the headphone is not used for a long time,in order to extend the battery
life,it is recommended to fully charge the headphone every month.
FCC Warning
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any inte rference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interferenceto radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Radiation Exposure Statement
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposure condition without restriction.