Acorn SBS-30-3F Commercial Plumbing Fixtures Installation Guide
- September 9, 2024
- acorn
Table of Contents
Acorn SBS-30-3F Commercial Plumbing Fixtures
Installation Manual
Pre-installation Preparation
- Screwdriver
- Rubber Mallet
- Measuring Tape
- Pencil
- Drill
- Caulking Gun
- Level
- Bucket
Package List
| Item | Image |
|---|---|
| Shower Tray | Image of shower tray |
| Drain Assembly | Image of drain assembly |
Specifications
| Dimension | Value |
|---|---|
| 900mm x 900mm | Height: 90mm |
| 900mm x 1200mm | Height: 90mm |
Installation Steps
- Step 1 Ensure the installation area is clean and dry. Use a bucket to clean the area if necessary. Check the level of the floor using a level tool.
- Step 2 Assemble the drain components as shown in the package list. Ensure all parts are securely connected.
- Step 3 Place the shower tray in the designated area. Use a level to ensure it is properly aligned. Pour water around the tray to check for any leaks. If leaks are found, adjust the tray and check the connections.
- Step 4 Apply caulking around the edges of the tray to seal it against the wall. Allow 24 hours for the caulking to dry before using the shower.
FAQ
- What tools do I need for installation?
- You will need a screwdriver, rubber mallet, measuring tape, pencil, drill, caulking gun, level, and a bucket.
- How do I check if the shower tray is level?
- Use a level tool to ensure the tray is properly aligned. Adjust as necessary.
- What should I do if I find leaks during the installation?
- Adjust the tray and check all connections. Ensure the drain components are securely connected and the tray is properly aligned.
Tools
Dimension
Package List
Installation Instruction
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>