GRAPHTEC CE8000 Series Cutting Plotter Owner’s Manual
- September 8, 2024
- GRAPHTEC
Table of Contents
- CE8000 Series Cutting Plotter
- Specifications:
- Product Usage Instructions:
- 1. Installation and Setup:
- 2. Loading Media:
- 3. Using Cutting Software:
- 4. Setting Cutting Parameters:
- 5. Initiating Cutting Process:
- Q: Can I use any type of media with this cutting plotter?
- Q: How do I troubleshoot if the cutting plotter encounters
CE8000 Series Cutting Plotter
“`html
Specifications:
- Name: Cutting Plotter CE8000series
- Cutter type: Roll feed
- Drive system: Digital servo
- Max. cutting area [W x L]:
- CE8000-40: 375mm x 50m
- CE8000-60: 603mm x 50m
- CE8000-130: 1270mm x 50m
- Accuracy guaranteed cutting area (W x L) when using basket:
- CE8000-40: 355mm x 2m
- CE8000-60: 583mm x 2m (583mm x 5m)
- CE8000-130: 1250mm x 2m (1250mm x 5m)
- Mountable media size:
- Minimum: 50mm
- Maximum: 85mm
Product Usage Instructions:
1. Installation and Setup:
Follow the manufacturer’s instructions to set up the cutting
plotter in your workspace. Ensure the device is placed on a stable
surface with enough space for media handling.
2. Loading Media:
Insert the media into the cutting plotter according to the
specified width range. Make sure it is properly aligned and secured
with the push rollers.
3. Using Cutting Software:
Install the provided software such as Cutting Master 5 or
Graphtec Studio 2 on your Windows or Mac computer. Use these
programs to create, edit, and send cutting data to the plotter.
4. Setting Cutting Parameters:
Adjust cutting conditions like speed, force, and other settings
based on the type of material you are working with. Ensure the
settings are optimized for accurate cuts.
5. Initiating Cutting Process:
Select the desired design or cutting data on the software, then
send the command to start the cutting process. The cutting plotter
will automatically detect registration marks and begin cutting.
FAQ:
Q: Can I use any type of media with this cutting plotter?
A: The cutting plotter supports various media types including
vinyl, paper, and more. Ensure the media falls within the specified
size and weight limits for optimal performance.
Q: How do I troubleshoot if the cutting plotter encounters
errors during operation?
A: Refer to the user manual for error code explanations and
troubleshooting steps. Ensure the media is loaded correctly and
check the cutting parameters for any inconsistencies.
“`
Cutting Plotter
CE8000series
CE8000-40/CE8000-60/CE8000-130
www.graphteccorp.com
Window Signs
Traffic Signs
Heat Transfer
Product Labels
Stickers
Custom-made Merchandises
POPs
NEW FUNCTIONS!
Cards
Backlight Films
Barcode Quick Menu Tool
Menu
Conditions
Wireless LAN: Able to install anywhere in your Touch panel: The operability
has been improved. office without being limited by the cable length.
Frequently used functions are displayed as icons.
*For limited areas only.
Media Set Assist: Suction fans are installed to Email notification function: The completion and error
avoid media lift and shift when feeding.
of continuous cut will be notified to users by email.
FEATURES TO IMPROVE YOUR PRODUCTIVITY
Quality guaranteed
Max. 5m
Printer
A
Printer
B
Printer
C
Top-level cutting speed, accuracy, quality will be your best business partner.
Can be combined with any printers when creating stickers and lables (Print&Cut).
Media Release paper
Operate both half-cut and perforation cut with Multiple-mark compensation (Matrix copy)
one tool.
function supports 0mm margin.
Mountable media width
Min. 50mm
Economy efficient by making full use of the media margin that tends to be wasted.
Cutting data can be placed outside the registration marks and able to make full use of the media.
By inserting a USB flash memory, cutting data can be transfered without using a PC.
Automatic identification of cutting data with the dedicated barcode avoids cutting wrong data.
Barcode
Available for both directions!
Just operate START and the cutting plotter detects the right data with the
barcord autoatically.
Feeding direction
Software included as standard
Cutting Master 5 (Windows / Mac)
RIP software to send cutting data from Adobe Illustrator / CorelDRAW to the cutting plotter.
Registration marks setting Objects layout
Cutting conditions setting
etc.
Graphtec Studio 2 (Windows / Mac)
Create, design, edit objects&texts and send data to the cutting plotter.
Registration marks setting Basic design of bjects&texts
Objects Layout Cutting conditions setting
etc.
Specifications
Name
Cutter type
Drive system
Max. cutting area [W x L]
Accuracy guaranteed cutting area (W x L) when using basket
Mountable media size
Minimum Maximum
Mountable roll media weight
Number of push rollers
Max. cutting speed (45°)
Max. acceleration
Cutting force
Min. font size
Mechanical step size
Programmable step size
Repeatability
Installable number of tools
Blade types
Pen types
Media types
Interface
Buffer memory
Command sets
Display
Power source
Power consumption
Operating environment
Accuracy guaranteed environment
External dimensions [W x D x H] including stand
Weight (approx.) including stand
Safety standards
EMC standards
Standard included software
CE8000-40
CE8000-60
CE8000-130
Roll feed
Digital servo
375mm x 50m
603mm x 50m
1270mm x 50m
355mm x 2m
583mm x 2m (583mm x 5m)
1250mm x 2m (1250mm x 5m)
50mm
85mm
484mm (19inch)
712mm (28inch)
1372mm (54inch)
5kg
9kg
17kg
2
3
900mm/s
1000mm/s
21.2m/s2 (45º)
14.1m/s2
4.41N (450gf)
Alphanumeric: approx. 5mm (varies depending on font and media)
0.005mm
GP-GL: 0.1 / 0.05 / 0.025 / 0.01mm, HP-GLTM : 0.025mm
Max. 0.1mm in plot up to 2m (Excluding media expansion and contraction)
1
Supersteel
Oil-based ballpoint pen, Water-based fiber-tip pen
Max. 0.25mm thickness Marking film (PVC / fluorescent / reflective) *High intensity reflective sheet is not supported
wireless LAN, USB2.0, Ethernet 10BASE-T/100BASE-TX (optional)
2MB
GP-GL / HP-GLTM * (Set by command or auto-detect)
Touch panel (240dot x 128dot)
AC100-120V, AC200-240V, 50/60Hz (auto-switchover)
Max. 140W
10 – 35 , 35 – 75 R.H. (non-condensing)
16 – 32 , 35 – 70 R.H. (non-condensing)
677 x 289 x 266mm
903 x 582 x 1076mm
1644 x 811 x 1076mm
11kg
21kg
PSE, UL/cUL, CE marking
VCCI Class A, FCC Class A, CE marking
Cutting Master 5, Graphtec Studio 2, Windows Driver
40kg
*HP-GLTM is a registered trademark of Hewlett-Packard Company.
Options Item Media baskets
Roll media stocker Carrier sheet table
Name PG0111 PG0112 OPH-A57 OPH-A45
Description for CE8000-60 for CE8000-130 for CE8000-60 for CE8000-40/60
Standard accesories AC power cable Cutter plunger (PHP33-09N-HS) Stand (CE8000-60/130 only) Safety guide
Cutting blade (CB09UB-1P) Roll media stocker (CE8000-40 only) Setup manual WLAN module set
Supply items Item Cutter plunger
Blade
Loupe Fiber-tip pen holder Ballpoint pen
Ballpoint pen holder Ball point pen refill Carrier sheet Cutting mat
USB cable
Name PHP33-CB09N-HS PHP33-CB15N-HS CE09UB-5 CB09UB-K60-5 CB15U-5 CB15U-K30-5 PM-CT-001 PHP31-FIBER KF700-BK KF700-RD PHP34-BALL KB700-BK CR09300-A3 PM- CR-013 PM-CR-014 PM-CR-015 PM-ET-001
Description Cutter plunger for 0.9mm x1 Cutter plunger for 1.5mm x1 0.9mm, 45º, Supersteel (for PVC film) 0.9mm, 60º, Supersteel (for PPF) 1.5mm, 45º, Supersteel (for paper, cardboard) 1.5mm, 30º, Superstee (for paper, cardboard) Blade loupe (for PHP33/PHP35 series) x1 Black x10 Red x10 x1 Black x10 for A3 size x2 *Please use with Cutting media table (OPH-A45). for CE8000-40 x2 for CE8000-60 x2 for CE8000-130 x2 Cable length: 2.9m x1
Brand names and product names listed in this brochure are the trademarks or registered trademarks of their respective owners. Items mentioned are subject to change without notice. For more information about product, please check the website or contact your local repres.entive.
Important safety instructions
Before using it, please read the user manual and then please useroit properly in accordance with the desc.ription. To avoid malfunction or electric shock, please ensure ground connection and use it in specified power source.
503-10 Shinano-cho, Totsuka-ku, Yokohama 244-8503, Japan Tel : +81
-45-825-6250 Fax : +81 -45-825-6396
Website https://www.graphteccorp.com
CE8000_JE10994_1D
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>