PHILIPS F32T8-TL935-ALTO Tuff Guard High CRI T8 Lamps Owner’s Manual
- September 11, 2024
- Philips
Table of Contents
F32T8-TL935-ALTO Tuff Guard High CRI T8 Lamps
“`html
Specifications
Product: Tuff Guard High CRI T8 Lamps
Model: F32T8/TL935/ALTO TG 30PK
Color Temperature: 3500K
Color Rendering Index (CRI): >90
Wattage: 32W
Voltage: 137V
Bulb Shape: T-8
Mercury Content: 1.7 mg
Quantity Per Pack: 30
Net Weight (Piece): 0.001 kg
EAN/UPC – Product/Case: 046677536497
Packs per outer box: 30
Dimensional Drawing:
Product Usage Instructions
Installation
-
Ensure power is switched off before installing or replacing the
lamp. -
Insert the T8 lamp into the fixture and twist it clockwise
until securely in place. -
Turn on power and test the lamp to ensure proper
functioning.
Maintenance
To maintain the lamp’s performance:
-
Regularly clean the lamp surface with a soft, dry cloth to
remove dust and dirt. -
Replace the lamp if you notice flickering, buzzing, or a
significant decrease in brightness.
Safety Precautions
Follow these safety guidelines when handling the Tuff Guard T8
lamps:
-
Avoid direct contact with the lamp when in use as it may be
hot. -
If the lamp breaks, ventilate the room and wear gloves to clean
up the shards carefully.
FAQ
Q: Can I use these lamps in outdoor fixtures?
A: These lamps are designed for indoor use only and should not
be exposed to outdoor elements.
Q: How long is the average lifespan of these Tuff Guard T8
lamps?
A: The average lifespan of these lamps is approximately 20,000
hours when used under normal conditions.
“`
Lighting
Tuff Guard High CRI T8 Lamps
F32T8/TL935/ALTO TG 30PK
Tuff Guard T8 lamps are designed to contain shattered glass particles in case
of accidental breakage. Coated lighting is essential to help ensure the
welfare of your customers, employees, and operation.
Warnings and Safety · The lamps must be installed and operating in ambient
temperatures below 120°F. · The lamps cannot be used in fixtures employing
defective ballasts, ballasts that have been used longer than their rated life
or
ballasts that are improperly wired. · The lamps cannot be used in fixtures
where poor pin contact occurs. · Lamp types and ballast types must be
compatible (rapid start lamps with rapid start ballast, etc.). · Lamps are
recommended for open fixtures.
Product data
General Information Cap-Base Features
Light Technical Color Code Beam Angle (Nom) Correlated Color Temperature (Nom)
Color rendering index (CRI)
Operating and Electrical Lamp Current (Nom) Wattage Equivalent
G13 [Medium Bi-Pin Fluorescent] ALTO® (ALTO)
935 [CCT of 3500K] 0 degree(s) 3500 K >90
265 mA 32 W
Voltage (Nom)
Mechanical and Housing Bulb Finish Bulb Shape
Approval and Application Mercury (Hg) Content (Nom)
Product Data Order product name Full product name Order code Material Nr.
(12NC)
137 V
Coated glass T-8
1.7 mg
F32T8/TL935/ALTO TG 30PK F32T8/TL935/ALTO TG 30PK 927871204905 927871204905
Datasheet, 2024, April 9
data subject to change
Tuff Guard High CRI T8 Lamps
Numerator – Quantity Per Pack Net Weight (Piece) EAN/UPC – Product/Case
Numerator – Packs per outer box
Dimensional drawing
1 0.001 kg 046677536497 30
D
EAN/UPC – Case
50046677536492
Product F32T8/TL935/ALTO TG 30PK
C (max) 1,213.6 mm
D (max) 27.9 mm
C
© 2024 Signify Holding All rights reserved. Signify does not give any representation or warranty as to the accuracy or completeness of the information included herein and shall not be liable for any action in reliance thereon. The information presented in this document is not intended as any commercial offer and does not form part of any quotation or contract, unless otherwise agreed by Signify. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V.
www.lighting.philips.com 2024, April 9 – data subject to change
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>