HRUITU T3 Skiing Wireless Bluetooth Headphone User Manual

HRUITU T3 Skiing Wireless Bluetooth Headphone

Product Information

Specifications:

• Compliance: Part 15 of FCC Rules
• RF Exposure: Meets general RF exposure requirements
• Usage: Portable with no restrictions

Product Usage Instructions

FCC Compliance:

This device complies with Part 15 of the FCC Rules. To ensure proper operation:

1. Avoid causing harmful interference.
2. Accept any interference received, even if it causes undesired operation.
3. If experiencing interference:
   • Reorient or relocate the receiving antenna.
   • Increase separation between equipment and receiver.
   • Connect the equipment to a different circuit than the receiver.
   • Consult a dealer or experienced technician for assistance.

RF Exposure:

The device has been evaluated to meet general RF exposure requirements. It can be used in portable exposure conditions without restrictions.

ISED Statement:

(Information related to ISED statement can be included here if available in the user manual)

FAQ

• Q: What should I do if the device causes interference?
  • A: Reorient or relocate the receiving antenna, increase separation between devices, or consult a professional for help.
• Q: Can the device be used in portable conditions?
  • A: Yes, the device can be used in portable exposure conditions without restrictions.

UNBOXING

PRODUCT INTRODUCTION

CHARGING

Open the charging case, correctly place the headphones (with the buttons and lights facing up): The white lights light up on the charging case to indicate battery(4 lights for 75%-100%; 3 lights for 50%- 75%; 2 lights for 25%-50%; 1 lights for below 25% ), if the battery low, connect the charging case to the TYPE-C cable for charging. The blue lights light up steady on the headphones to indicate battery low, then light off after full charging. The charging box supports wide voltage input and has overvoltage protection function.

BASIC PARAMETERS

1. Weight: Approx. 79g
2. Button: One each on the left and right headphones
3. Battery Specification: Rechargeable lithium polymer battery 3.7V
4. Low Power Warning: 3.2V
5. Continuous Talk Time: 9 H
6. Continuous Music Playback Time:Approx. 10 H (at 100% volume)
7. Charging Port:2PIN
8. Headphones charging time: Approx. 2 H
9. Frequency Response:20Hz~20KHz
10. Operating Temperature:-20°C~60°C
11. Storage Temperature:-20°C-80°C

BLUETOOTH PARAMETERS

1. Bluetooth Version: Ver.5.3
2. Bluetooth Name: Hi Hruitu T3
3. Transmit Power: class I|(-6dBm ~ +4dBm)
4. Reception Sensitivity:-92dBm
5. Working Frequency:2.402GHz~2.480GHz
6. Transmission Distance: 10m

HEADPHONES POWERING ON/OFF

1. Place in the charging box to turn off, take out from the charging box to turn on.
2. Manual power on: In the off state, when the headphones are outside the charging box, press the L/R headphone button for 2 s, the blue lights will come on with a “power on” audio cue.
3. Manual power off: In the on state, press the L/R headphone button for 10 s, the white lights will come on with a “power off” audio cue.
4. If powered on and not connected to Bluetooth, the headphones will automatically turn off after 3 mins.

PAIRING

1.  Take the headphones out of the charging box, the main headphone appears blue and white lights alternately flash, the headphone blue light is off 1s later, indicating pairing mode.
2.  On your device, turn on Bluetooth, search and add a new device. Choose “Hi Hruitu T3” and connect.
3.  Once the headphones are successfully connected, a voice will say “Paired”
4.  Disconnecting: If you actively disconnect the headphones, there will be a “disconnected” audio cue, and the headphones will back to pairing mode.
5.  Reconnecting: When the headphones are turned on again, they will automatically try to connect to devices on the paired list.

BUTTON FUNCTIONS

1. Play Music: Click the headphone button or play directly from the phone.
2. Pause Music: During playback, click the headphone button to pause.
3. Previous Song: Double-click the left headphone button.
4. Next Song: Double-click the right headphone button.
5. Volume increase: Press the R hearphone button for 2 s.
6. Volume down: Press the L hearphone button for 2 s.
7. Answer Call: When receiving a call, double click the headphone button.
8. Decline Call: When receiving a call, press the headphone button for 2 s.
9. End Call: During a call, double click the headphone button; you will hear a “du” sound cue.

BATTERY INDICATOR

1. On the charging box and your devices, you can see the real-time battery level of the headphones and the charging box.
2. When the battery is low, the headphones will play a “Battery Low” audio cue, and the white indicator lights flash once every 5 s, and a reminder tone is played every 5mins.

OTHER NOTE

1. If the headphone is on and no device is connected, the headphone will automatically turn off after 5 mins.
2. If you can’t find the headphones during a search, make sure your device’s Bluetooth is turned on; Or turn off the Bluetooth headphone, and then turn it on again, when the main headphone appears blue and white lights alternately flash, the headphone blue light is off 1s later, you can search for Bluetooth devices again.
3. If the device loses connection because it is too far away from the phone and returns to the signal range within 3 mins, the device will automatically reconnect. If the headphone is not reconnected within 3 mins, the headset will sound a power off tone and turn off.

Thank you!

You are the driving force that keeps us going.

Thank you for being with us all along.

We hope you will enjoy it.

We are here to help!

If you have any after-sales issues, please contact the customer service at Email: sale01@hruitu.com

FCC STATEMENT

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

RF warning statement:

The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

ISED Statement

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.

The digital apparatus complies with Canadian CAN ICES-3 (B)/NMB-3(B)

This device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS 102 RF exposure, users can obtain Canadian Information on RF exposure and compliance

This equipment complies with Canada radiation exposure limits set forth for an uncontrolled environment

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>