FISHER AND PAYKEL HP60ICSX3 Integrated Insert Wall Rangehood User Guide
- September 6, 2024
- FISHER and PAYKEL
Table of Contents
HP60ICSX3 Integrated Insert Wall Rangehood
Specifications
-
Accessories (sold separately): Eave ducting
kit, Light bulb, Recirculation carbon filter, Roof ducting kit,
Side wall ducting kit -
Dimensions: Height 325 mm, Width 492 mm, Depth
277 mm -
Fan ratings: Maximum pressured air movement
EN61591 -
Maximum sound rating: 1
-
Air outlet size: 120 mm
-
Ducted Recirculation: Top extraction
optional -
Fan speeds: 3
-
Filter type: Mesh
-
Number of filters: 1
-
Power requirements: Supply voltage 220-240
V -
Product dimensions: Depth 277 mm, Height 325
mm, Width 492 mm -
Control type: Slider
-
Ventilation features: Light type LED
-
SKU: 50133
Product Usage Instructions
Installation
-
Ensure all accessories are available for installation.
-
Follow the provided user manual for step-by-step installation
instructions. -
If ducted, choose the appropriate ducting kit based on your
kitchen setup.
Cleaning
-
Ensure the rangehood is turned off and disconnected from power
before cleaning. -
Remove and clean the filters regularly either by hand or in the
dishwasher if they are dishwasher safe. -
Clean the exterior surfaces with a damp cloth and mild
detergent. Do not use abrasive cleaners.
Frequently Asked Questions (FAQ)
Q: Can the rangehood be installed without professional
help?
A: Yes, the rangehood is designed for easy installation and
comes with a user manual for guidance. However, if you are unsure,
it is recommended to seek professional installation.
Q: How often should the filters be cleaned?
A: The filters should be cleaned regularly, ideally every 2-3
months depending on usage. If cooking frequently with high smoke or
grease, more frequent cleaning may be required.
Q: What is the warranty period for this product?
A: The warranty period for this product is typically outlined in
the user manual or can be confirmed by contacting Fisher &
Paykel Customer Support.
QUICK REFERENCE GUIDE > HP60ICSX3
60cm Series 3 Integrated Insert Wall Rangehood
Series 3 | Integrated Stainless Steel
This efficient, stylish rangehood is perfectly hidden away in cabinetry and
easy to install.
With three fan speeds, select the perfect extraction rate for your cooking
Hidden from view by integrating seamlessly into the cabinetry above your
cooktop Powerful maximum air movement 740m³/hr
DIMENSIONS
Height Width Depth
SPECIFICATIONS
Accessories (sold separately) Eave ducting kit Light bulb Recirculation carbon
filter Roof ducting kit Side wall ducting kit
325 mm 492 mm 277 mm
PD-RHK125E 792603 791772
PD-RHK125T PD-RHK125W
Fan ratings Maximum pressured air movement EN61591 Maximum sound rating
740 m³/hr 60 dBA
Installation and cleaning
Air outlet size Dishwasher safe filters Ducted Recirculation
120 mm 1
Top extraction Optional
Performance Extraction type Fan speeds
Surface 3
Filter type Number of filters
Power requirements Supply voltage
Product dimensions Depth Height Width
Product information Control type
Ventilation features Light type
Date: 28.08.2024 > 1 Mesh 1
220-240 V
277 mm 325 mm 492 mm
Slider
LED
SKU
50133
The product dimensions and specifications in this page apply to the specific product and model. Under our policy of continuous improvement, these dimensions and specifications may change at any time. You should therefore check with Fisher & Paykel’s Customer Care Centre to ensure this page correctly describes the model currently available. © Fisher & Paykel Appliances Ltd 2020
QUICK REFERENCE GUIDE > HP60ICSX3
Other product downloads available at fisherpaykel.com
Archicad Integrated Insert Rangehood Service & Warranty Revit Integrated
Insert Rangehood Rhino Integrated Insert Rangehood Sketchup Integrated Insert
Rangehood Installation & User Guide Built-in Integrated Rangehood
Where applicable:
All appliances use energy, and energy usage typically generates carbon
emissions. Fisher & Paykel Appliances’ In-use Energy Carbon Emissions Estimate
indicates carbon emissions from a product’s in-use energy. This is calculated
either annually or per cycle, using the product’s market-specific energy label
energy consumption data multiplied by the carbon emissions factor for energy
in your country or region.
Our In-use Energy Carbon Emissions Estimate is designed to assist customers in
making informed purchasing decisions when comparing different Fisher & Paykel
products. For example, a heat pump dryer typically has a lower In-use Energy
Carbon Emissions Estimate than a vented dryer.
A PEACE OF MIND SALE
24 Hours 7 Days a Week Customer Support T 1300 650 590 Wwww.fisherpaykel.com
Date: 28.08.2024 > 2