UGREEN CM817 Smart Finder User Manual

UGREEN CM817 Smart Finder

Specifications

• Model: CM817
• Bluetooth Version: 5.0
• Frequency Band: 2400MHz-2483.5MHz
• Max. RF Output Power: 4dBm (EIRP)
• Battery Type: Polymer Lithium-ion Battery
• Rated Capacity: 155mAh (3.7V/573.5mWh)
• Limited Charging Voltage: 5.25V
• Operating Time: 12 Months (Theoretical Value)
• Charging Type: Magnetic Contact
• IP Ratings: IP68
• Compatible Systems: iOS 14.5/iPadOS 14.5 or later/macOS12.5 or later

Product Overview

• Lanyard Hole
• Button
• Indicator
• Charging Port

Product Usage Instructions

Pairing

1. Tap and hold the button for 2 seconds to power on, and the product will automatically enter pairing mode.
2. Bring the product near your iPhone, then open the Find My app.
3. Add Item:
   • For initial pairing: Tap Items > Add Item > Other Supported Item, then tap Connect and name the product.

Unpairing

1. Bring the product near your iPhone, then open the Find My app.
2. Tap Items tab, then select SmartTag.
3. Tap Remove Item > Remove at the bottom of the screen to successfully unpair it.

Resetting the Product

In the power-on state, quickly tap the button 5 times until you hear 3 consecutive beeps, then continue to tap and hold the button for 6 seconds until you hear 2 beeps.

Charging

• Charging: Solid Red
• Fully Charged: Off

Power Supply
Tip : You can check the remaining battery level of the product in the Find My app.

Sound Function

• Tapping and Holding for 2s: Power on
• Tapping and Holding for 6s: Power off (2 short beeps, then 1 long beep)
• When Not Paired: Play melody for 2s
• When Paired: 4 short beeps

FAQ

• How do I reset the product?
  In the power-on state, quickly tap the button 5 times until you hear 3 consecutive beeps, then continue to tap and hold the button for 6 seconds until you hear 2 beeps.

• How do I check the battery level?
  You can check the remaining battery level of the product in the Find My app.

Product Overview

Specifications

The data are measured by UGREEN lab but may vary based on specific circumstances.

Package Contents

• Smart Finder
• Lanyard
• Charging Cable
• User Manual

Pairing

1. Tap and hold the button for 2 seconds to power on, and the product will automatically enter pairing mode.
2. Bring the product near your iPhone, then open the “Find My” app.
3. Add Item: For initial pairing: Tap “Items” > “Add Item” > “Other Supported Item”, then tap “Connect” and name the product

If already paired before: Tap “Items” > “+” button > “Add Other Item”, and the system will display the pairing information of the product. Follow the onscreen instructions to finish setting up the item.

Notes

• This product is compatible with Apple devices running iOS 14.5/iPadOS 14.5 or later, as well as macOS 12.5 or later, this manual uses iPhone as an example.
• Please make sure that Bluetooth is enabled on your iPhone before use.
• Please complete the connection within 5 minutes after the product is turned on. Otherwise, the product will automatically turn off. If it turns off, tap and hold the button for 2 seconds to restart.

Unpairing

1. Bring the product near your iPhone, then open the “Find My” app.
2. Tap “Items” tab, then select “SmartTag”.
3. Tap “Remove Item” > “Remove” at the bottom of the screen to successfully unpair it.

Notes

• When unpairing, please make sure that the product is properly connected to the iPhone and is placed near the iPhone.
• After successfully unpairing, if the product cannot connect to another iPhone, please try resetting the product: In the power-on state, quickly tap the button 5 times until you hear 3 consecutive beeps, then continue to tap and hold the button for 6 seconds until you hear 2 beeps

Charging

Tip: You can check the remaining battery level of the product in the “Find My” app.

Sound

WARNING

1. This product has a built-in polymer lithium-ion battery. Do not disassemble, hit, crush, or throw it into the fire.
2. Discontinue use immediately if the battery is severely swollen.
3. Do not use it in a high-temperature environment.
4. Do not use the battery if it is immersed in water.
5. The battery is hazardous. Please keep the product out of the reach of children.
6. If the battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death. If you think battery might have been swallowed or placed inside any part of the body, seek immediate medical attention.
7. Dispose of or recycle dead battery properly according to local laws and regulations.
8. This product contains small parts, please do not use it as a toy for children to prevent swallowing.
9. Retain the original product literature for future reference.
10. Please use a power supply that meets the requirements of the corresponding safety standards and has a rated output of 5V 1A for charging, otherwise it may cause fire or damage to the product.

Find Smart Finder When It’s Nearby

1. Open Find My app and select the “ltems” tab or open the Find ltems app on your Apple Watch.
2. Tap on your Smart Finder from the list.
3. Tap “Play Sound” to make your Smart Finder beep.
4. Tap “Stop Sound” to stop the beeps once you find.

Find Smart Finder ‘s Location

1. Open Find My app and select the “ltems” tab or open the Find ltems app on your Apple Watch.
2. Tap on your Smart Finder from the list.
3. Your Smart Finder’s location will appear on the Map with a timestamp of when the item was located.
4. To navigate to the Smart Finder’s location, tap ” Directions” to open Apple Maps.

Enabling “Notify When Left Behind”

1. Open Find My app and select the “ltems” tab or open the Find ltems app on your Apple Watch.
2. Tap on your Smart Finder from the list.
3. Under “Notifications” enable the “Notify When Left Behind” toggle.
4. You will receive a notification when you leave your Smart Finder behind and it’s no longer in range of your device.

Enabling “Notify When Found”

1. Under “Notifications”, enable the “Notify When Found” toggle.
2. When your Smart Finder is seen by another Find My network device, you will receive a notification of its location.

Note :”Notify When Found” can only be activated when your Smart Finder is out of range.

Enabling “Lost Mode”

1. Open Find My app and select the “ltems” tab or open the Find ltems app on your Apple Watch.
2. Tap on your Smart Finder from the list.
3. Under “Lost Mode” tap “Enable ”
4. A screen detailing Lost Mode will pop up, tap “Continue
5. Enter your phone number or email address and tap “Next”
6. You may enter a message that will be shared with the person that finds your item.
7. Tap “Activate” to enable “Lost Mode

Note : When “Lost Mode” is enabled, “Notify When Found” is automatically enabled.
Note : When” Lost Mode” is enabled, your Smart Finder is locked and cannot be paired to a new device.

Remove The Smart Finder From Find My App

1. Open Find My app and select the “ltems” tab.
2. Tap on your Smart Finder from the list.
3. Please ensure “Lost Mode” is disabled.
4. Scroll to the bottom of the screen and tap “Remove ltem”
5. A summary will open, tap “Remove” to confirm.

Remove The Smart Finder From Find My App

1. After successfully removing the Smart Finder from Find My app，can be paired with the new Apple ID;
2. If you still can’t connect, please short press 5 times within 5 seconds to hear three consecutive beeps, then long press 6 seconds within 10 seconds to hear two didi beeps, then the product is finished resetting，Pair it with your new Apple ID.

Unwanted Tracking

If any Find My network accessory separated from its owner is seen moving with you over time, you’ll be notified in one of two ways:

1. If you have an iPhone, iPad, Find My will send a notification to your Apple device.This feature is available on iOS or iPadOS 1 4.5 or macOS12.5 later.
2. If you don’t have an iOS device or a smartphone, a Find My network accessory that isn’t with its owner for a period of time will emit a sound when it’s moved. These features were created specifically to discourage people from trying to track you without your knowledge

Safety Instructions

• Avoid moisture, Do not use aerosol, solvent or abrasive agents to clean the product.
• Keep out of reach of children to avoid accidental swallowing.
• The product has built-in battery, please stop use when it is swollen.
• Do not expose the product to excessive temperature.
• Stop using when the product is submerged.

About Apple Find My

• The Apple Find My network provides an easy, secure way to locate compatible personal items using the Find My app on your iPhone, iPad, Mac, or the Find ltems app on Apple Watch.
• To use the Apple Find My app to locate this item, the latest version of iOS, iPadOS, or macOS is recommended, The Find ltems app on Apple Watch requires the latest version of watchOS.
• Use of the Works with Apple badge means that a product has been designed to work specifically with the technology identified in the badge and has been certified by the product manufacturer to meet Apple Find My network product specifications and requirements. Apple is not responsible for the operation of this device or use of this product or its compliance with safety and regulatory standards.
• Apple, Apple Find My, Apple Watch, Find My, iPhone, iPad, iPadOS, Mac, macOS and watchOS are trademarks of Apple Inc.

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Ugreen Group Limited is under license. Other trademarks and trade names are those of their respective owners.

FCC Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions：
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Warning : Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction
Manufacturer: Ugreen Group Limited
Manufacturer Add : Ugreen Building, Longcheng Industrial Park, Longguanxi Road, Longhua, Shenzhen, China
Tel : +86-755-28066530
Email : support@ugreen.com
US REP : America Ugreen Limited
Add : 108 West, 13Th Street, Wilmington, Delaware 19801, United States

Warranty Information

A limited 2-year warranty applies to all UGREEN products purchased from UGREEN official store or authorized sellers. Please feel free to contact us if you run into any problems

IC Statement

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference; (2) this device must accept any interference, including interference that may cause undesired operation of the device
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment.
CAN ICES-003(B) / NMB-003(B)

WEEE

• This symbol on the product(s) and / or accompanying documents indicates that, under the new Directive 2012/19/EU on waste electrical and electronic equipment (WEEE), product(s) used electrical and electronic equipment (WEEE) should not be mixed with general household waste. For proper treatment, recovery and recycling, please take this product(s) to designated collection points where it will be accepted free of charge.
• Disposing of this product correctly will help save valuable resources and prevent any potential negative effects on human health and the environment, which could otherwise arise from inappropriate waste handling.
• Please contact your local authority for further details of your nearest designated collection point. Penalties may be applicable for incorrect disposal of this waste, in accordance with your national legislation.
• For professional users in the European Union
• If you wish to discard electrical and electronic equipment (EEE), please contact your dealer or supplier for further information.
• For disposal in countries outside of the European Union
• This symbol is only valid in the European Union (EU). If you wish to discard this product please contact your local authorities or dealer and ask for the correct method of disposal.

EU Declaration of Conformity
Hereby, Ugreen Group Limited declares that the product model is in compliance with Directive
2014/53/EU & 2011/65/EU. Learn more about the EU Declaration of Conformity from the following Internet address: https://www.ugreen.com/download/

Manufacturer: Ugreen Group Limited
Manufacturer Add : Ugreen Building, Longcheng Industrial Park, Longguanxi Road, Longhua, Shenzhen, China Tel: +86-755-28066530
Email: support@ugreen.com
EU REP : Ugreen Group GmbH
EU Add: Mannheimer Str. 13, 30880 Laatzen, Germany
Tel: +49(0)17660827663
Email: support@ugreen.com

Declaration of Conformity

Hereby, Ugreen Group Limited declares that the product type is in compliance with Directive UK Radio Equipment Regulations(SI 2017 No.1206)& The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012 (SI 2012 No.3032). Learn more about the GB Declaration of Conformity is available at the following Internet address:https://www.ugreen.com/download/
Manufacturer: Ugreen Group Limited
Manufacturer Add: Ugreen Building, Longcheng Industrial Park, Longguanxi Road, Longhua, Shenzhen, China
Tel: +86-755-28066530
Email: support@ugreen.com
UK REP: Acumen International Business Consultancy Limited
UK Add: 94 Ock Street, Abingdon, OX14 5DH, UK
Tel: +44(0) 1235200526
Email: support@ugreen.com

https://www.ugreen.com/download/
Hersteller: Ugreen Group Limited
Herstelleradresse: Ugreen Building, Longcheng Industrial Park, Longguanxi Road, Longhua, Shenzhen, China
Tel: +86-755-28066530
E-Mail : support@ugreen.com
EU REP : Ugreen Group GmbH
EU-Adresse : Mannheimer Str. 13, 30880 Laatzen, Germany
Tel: +49(0)17660827663

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>