duopower DP-P600B Portable Power Station Instructions

duopower DP-P600B Portable Power Station Instructions

Preface

Duo power’s products. In order for you to further understand the product, please read this manual carefully before use. Wishing you a pleasant experience!

Safety instruction

Warning

• This product contains lithium batteries, and disassembly, violent impact, and squeezing are prohibited.

• It is strictly prohibited to put this product into fire or use it under high temperature or short circuit conditions.

• It is strictly prohibited to insert other objects or fingers into this product or use sharp objects to puncture this product, in order to avoid abnormal use or short circuits that may cause product damage, and in severe cases, may lead to explosion hazards.

• If this product accidentally falls into the water, it should be placed in a safe and open area and immediately moved away until it dries naturally.
  After drying, do not continue to use and dispose of properly according to the instructions in this manual·

• Due to the special nature of the product (built-in battery, capable of discharging high voltage, etc.), please keep the product out of reach of children and pets. Special populations should use it under the protection of a guardian.

Safety use

• Do not put heavy objects on the product.
• Please use this product in a dry and well ventilated environment. When using, please ensure that the heat dissipation holes of this product are unobstructed.
• It is strictly prohibited to keep this product close to heat sources or ignition sources, such as microwaves, pressure cookers, heating furnaces, etc. If the product catches fire, please use fire extinguishing equipment as soon as possible.
• Do not allow this product to come into contact with any liquids, and do not use this product in rain or other damp environments.
• After the product is subjected to strong impacts or falls, do not continue to use it and dispose of it properly according to the instructions in this manual.
• Do not use this product in environments with strong static electricity or strong magnetic fields.
• When not in use, please remove the power cord and all external devices of the product; When removing the power cord, hold the plug and unplug it, do not directly pull the power cord body.
• Do not use unofficially designated components or accessories. If you need to repair the product or replace accessories, please contact Duopower’s customer service.
• It is strictly prohibited to use damaged power cords to connect this product.
• Please use according to the working environment temperature specified in this product.

Transportation and storage

• Please store this product in a room temperature and dry environment.
• It is strictly prohibited to mix, store or transport this product with metal objects (glasses, watches, metal necklaces, hair clips, etc.).
• If you need to ship this product through logistics, please discharge the battery to 10%~30% first.
• This product cannot be carried on board, please comply with the relevant regulations of civil aviation transportation.

Maintenance and upkeep

• please charge and discharge it at least every 3 months (discharge to 30% first, then charge to 60%) to ensure battery health·
• Before storing this product, please check the remaining battery level. If there is a low battery prompt, please charge it first. Otherwise, long-term low battery storage may cause damage to the product battery·
• Please store this product at the optimal storage environment temperature specified in this manual (15-25 ℃).
• If there is dirt on the interface of this product, please use a dry cloth to clean it. Do not use chemical or spray type cleaners.

Abandoned

• Please follow the local laws and regulations on battery recycling and disposal when disposing of this product. It is strictly prohibited to dispose of it in ordinary trash cans.
• Please make sure to completely discharge the battery of this product before disposing of it in the designated battery recycling bin.
• If the battery cannot be fully discharged due to the malfunction of this product itself, a professional battery recycling company should be contacted for further treatment.

Important note

The following devices or scenarios require extremely high reliability and safety, please do not use the UPS function of the product.

• Medical equipment that directly affects life safety.
• Equipment that may cause personal injury (such as air planes, ships, railways, elevators, etc.).
• Data storage devices:
  This product is not suitable for any high-risk activities, such as activities where equipment failure can directly lead to death, personal injury, significant property damage, or activities that affect the operation of medical or life support equipment. Duo power expressly denies any express or implied warranties regarding the suitability of high-risk activities, and any such use constitutes misuse of the product.

Disclaimers

Before use, please carefully read this manual and use this product correctly according to all safety instructions in this article, especially the relevant precautions. Please be sure to follow them. Please keep it safe for future reference after reading. Within the scope permitted by law, our company shall not be responsible for product damage, personal injury, property damage, etc. caused directly or indirectly by improper use. Subject to compliance with laws and regulations, our company has the final right to interpret this manual and other related documents of this product. Any updates, revisions, or terminations are subject to no further notice, but you can view them online through the “Duo power” app or visit us at http://www.duopowersolutions.com/Download.

Product display

**LCD icon instruction

Appearance and function instruction

**

1. DC switch
2. USB-A1 output
3. USB-C1 output
4. LCD display
5. USB swtich
6. USB-C2 output
7. USB-A2 output
8. AC swtich
9. AC-2 output
10. AC-1 output
11. Motherboard reset key
12. Car charging 12V output
13. IoT reset key（IoT models only）
14. DC5521 12V output
15. DC5521 12V output
16. Wireless charging（yes no ）
17. LED instruction
18. PV(DC) charging input
19. Electric charging input

Product parameter

Basic Parameter

Product size| 27.5×24.0x19.0(cm)
product weight| ≈7.5kg
battery’s rated capacity| 481.6Wh，21.5Ah/22.4V
Input Parameter
AC Input| 200-240V~ 50/60Hz 400W Max
Solar Input| 11.2-50V/12A 240W Max
Car Charging Input| 12/24V 8.5A Max
Output Parameter
AC Output(X2)| 220V~ 50Hz 2.72A 600W Max(pure wave)
USB-A1 Output| 5V/3A , 9V/3A , 12V/2A , 20V/1.4A 28W Max| two port output at sometime： 5V=3.4A
USB-C1 Output| 5V/3A , 9V/3A , 12V/2A , 15V/3A , 20V/5A 100W Max
USB-A2 Output| 5V/3A , 9V/2A , 12V/1.5A , 18W Max| two port output at sometime： 5V=3.4A
USB-C2 Output| 5V/3A , 9V/3A , 12V/2.5A , 30W Max
Car Charging output(X1)| 12V/10A 120W Max
DC5521 Output(X2)| One Port12V/5A(Ciaarette Lighter Port+DC5521x20utput at The Same time120W Max)
Total Power| 600W Max（AC+DC）
Work Temperature
Discharging temperature| -10℃-40℃
charging temperature| 0℃-40℃

Charging and supply electricity for devices

Power on/off

x1: Power on：any key,click to power on
3S. Power off：Hold down any key for more than 3S to turn off the power

Notice：
USB Power DC Power AC Power LED Power When turned on, if there is no operation within one minute, the display screen will turn off. At this time, click any key again to wake up the display screen. If no input or output devices are connected within three minutes, the power will automatically shut down and enter sleep mode. After entering sleep mode, click any key in USB Power, DC Power, AC Power, or LED Power to wake up

**Use AC output

X1. In standby mode, click on turn on and then click on turn off again..
  3S.** Press and hold the button for more than 3 seconds to turn off the power

**Using car charging, DC5521, wireless charging output

x1. In standby mode, click on turn on and then click on turn off again
x2. In the power on state, double-click to enable DC micro current mode , turn it on after success, the indicator light on the DCPower button will flash State, click again to exit micro current
3S.** Press and hold the button for more than 3 seconds to turn off the power

**Use USB and Type-c output

X1. In standby mode, click on turn on and then click on turn off again
**

X2. In the power on state, double-click to enable USB micro current mode , turn it on after success, the indicator light on the USB Power button will flash State, click again to exit micro current.
3S. Press and hold the button for more than 3 seconds to turn off the power

Charging for device

Safety warning

• Before charging, please confirm whether the output parameters of the charging device meet the charging input parameters of this product.
• Please use original or safety certified power cords that meet the charging specifications of this product.
• When charging, please ensure that the product is well ventilated and free of flammable materials.

Important notice

• Before first use, please fully charge this product.
• To ensure charging safety, if the input current exceeds the over current protection value during charging, this product will automatically trigger the over current protection function. The charging AC protection switch will pop up. After the overcurrent is eliminated, press the button again to resume charging.
• If the product indicates low battery, please charge it in a timely manner, otherwise it is easy to cause the product to be under voltage locked and unable to be used

Use AC output
When this product uses mains charging, the flash charging function is enabled by default, supporting a maximum of 400W charging.

Use solar panel input
When using solar charging for this product, the charging voltage range is 11 .2V-50V, the maximum current is 12A, and the maximum power is 240W.

Use car charging input
When using the car cigarette lighter for charging, this product intelligently recognizes the status of the charger, with a maximum charging current of 8.5A

Notice

• Please connect the charging after the car is ignited and started to avoid the battery running low and unable to start.
• Please ensure that the car’s cigarette lighter and onboard charging cable are connected properly

LED instruction

In standby mode, you can switch between five states by pressing the button: “High light ->White light ->Warm light ->SOS ->Off”.

Highlight

White Light

Warm light

SOS

Turn off (or press and hold for 3 seconds)

Work mode instruction

screen will turn off; If no device is connected within 3 minutes, the product will automatically shut down| The default working mode of the product
USB micro current mode| After turning on the device, double-click the USB POWER button, and the USB and TYPE-C output ports will enter a long open state. At this time, low current devices such as Bluetooth earphones and smartwatches can be charged, and the indicator light on the USB POWER button will be flashing.| When turned on, double-click the USB POWER key to turn it on, then click the USB POWER key to exit this mode
DC micro current mode| After turning on, double-click the DC POWER button, and the DC and wireless charging output ports will enter a long open state. At this time, you can charge low current products such as Bluetooth earphones and smartwatches with wireless charging function; Or provide power to small current devices powered by DC 12V. At the same time, the indicator light on the DC POWER key will be flashing.| When turned on, double-click the DC POWER button to turn it on, and click the DC POWER button to exit this mode

Special function instruction

CPM(Constant power mode)
This function is automatically enabled in AC output mode, and when enabled, the product’s AC output port can support up to 1000W devices.

Notice：

• For safer charging, this feature is temporarily unavailable when connected to the AC charging input of this product.
• This mode is enabled by default when the device leaves the factory, and users do not need to set it separately
• The AC output port can support up to 1000W of heating devices, such as hair dryers, electric kettles, etc. However, this function is not suitable for all electrical appliances and is not recommended for supplying power to inductive devices such as air conditioners, coffee machines, clothes dryers, and devices with high power demands.

Remaining range
When the battery level is less than 5%, it will be automatically triggered. At this time, the AC and DC output ports will be forcibly closed and cannot be discharged externally. The USB (TYPE-C) output and LED lighting (SOS) will not be affected.
When the battery level is less than 2%, it will be automatically triggered. At this time, all output ports of AC, DC, and USB (TYPE-C) will be forcibly closed and cannot be discharged externally. LED lighting (SOS) will not be affected.
When the remaining power is ≥ 5% after charging, the power will automatically exit the remaining battery life mode.

Notice：

• The purpose of this function is to retain excess charge when the power supply is discharged to low power, so that communication products such as mobile phones can be charged in emergency situations, while ensuring the normal use of LED lighting and SOS distress function.
• After using this function, the remaining charge of the power supply will be completely consumed. Please charge it in a timely manner, otherwise it is very easy to cause the power supply to be locked and unable to use due to deep discharge, and even damage the battery.

Intelligent charging
To ensure safe use, this product will automatically enable adaptive charging power during charging, and adjust the charging power in real-time based on the current battery level and temperature, with a maximum of 400W.

Reset settings

When the product crashes or malfunctions, use a paper clip, phone card reader, or other small needle like object to push it into the small hole of the reset button, trigger the reset button, and reset the power supply. Note: This function is only necessary when the product experiences downtime or malfunctions, and should be used with caution under normal circumstances.

Normal problems

Question: What device can the AC output port of the product be connected

to?

Answer: The rated power of the AC output port of this product is 600W, which can power most consumer electronics products. However, before use, it is recommended that you confirm the power size of the equipment and ensure that the sum of the power of all load devices is less than the rated power. In addition, in the power boosting mode, the AC AC output port can support a maximum of 1000W of heating equipment; But this feature is not applicable to all devices, and it is not recommended to power inductive devices such as air conditioners, coffee machines, dryers, and devices with high power demands.

Question: Can device charge and discharge at the same time?

Answer: Sure. When using this function, the power of the electrical equipment should not exceed the rated output power of this product.

Question: How do I know how long the product can be powered?

Answer: After the device is connected, the display screen will show the expected remaining usage time; This time is calculated based on the actual power of the connected device, the remaining power of this product, and other numerical values; If the actual power of the connected device is high and the remaining power is low, then the power supply time is short.

Question: Is there a sound of the fan rotating during product use?

Answer: This sound is mainly generated by the rotation of the internal cooling fan of the product, which is a normal phenomenon; To ensure the safety of product use, when the charging and discharging power is high, the internal cooling fan will be turned on to cool down the product.

Question: Why does the product run out of battery even if it is not used

over time?

Answer: The product itself also has standby self consumption power consumption, and long-term non use can also deplete the battery. Therefore, we suggest that when the product is not used for a long time, it should be charged at least every 3 months to 50-60%.

Fault display and handling

external devices from the product, restart the product. If the fault prompt persists after restarting, please stop using this product immediately and contact after-sales service.
ERROR| USB output short circuit, overload errors alarm.| After removing all USB external devices from the product, restart the product. If the fault prompt persists after restarting, please stop using this product immediately and contact after-sales service.
output short circuit, overload,reverse connection or reverse charging errors alarm| Check for any incorrect operation of reverse connection or reverse charging, and remove all DC external devices from the product before restarting. If the fault prompt persists after restarting, please stop using this product immediately and contact after-sales service.
AC output overload,short circuit errors alarm| Check if there is any overload or short circuit abnormality in the AC output electrical equipment. Remove all AC external devices from the product and restart it. If the fault prompt still persists after restarting, please stop using this product immediately and contact after-sales service.
DC input overload, over current protection alarm| Check if the DC charging input voltage exceeds the allowable range of the product.After removing the DC charging input device, restart the product. If the fault prompt persists after restarting, please stop using this product immediately and contact after-sales service.
| low power of battery and error alarm| battery level of this product is less than 5%. If so, please charge it promptly;If not, please suspend the use of this product and contact after-sales service.
| **** low temperature alarm| Please pause the charging and discharging of this product and move it to the working environment temperature required in this manual for a period of time until the fault prompt disappears before using it again.
| High temperature alarm| Please pause the charging and discharging of this product and move it to the working environment temperature required in this manual for a period of time until the fault prompt disappears before using it again.

Notice: If there is an unresolved malfunction, please contact the after- sales service.

Package list

• 600W Portable Power Station ×1

• AC charger cable ×1

• Car charger cable ×1

• Instruction, warranty ×1

FCC Caution:

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference,
(2) this device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception,which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with minimum distance 20cm between the radiator and your body: Use only the supplied antenna.

FCC ID:2BGDC-DP-P600B

New energy,New life,New future!

Ningbo Duo Power New Energy Electrical Technology CO.,LTD
No.168,Kanchenjunga East Road, Zhouxiang Town,Ci xi City,Ningbo City,Zhejiang Province,China
www.duopowersolutions.com

The data mentioned in this specification are from DuoPower laboratories.
Actual use may vary slightly due to environmental factors, methods, equipment specifications, etc. Please refer to actual use for accuracy.

References

• Duopower多源——深耕行业10年以上的储能专家
• Duopower多源——深耕行业10年以上的储能专家

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>