GASGAS MX-CF-FS Factory Edition Motocross Machines Loaded Kit Instructions
- September 5, 2024
- GASGAS
Table of Contents
GASGAS MX-CF-FS Factory Edition Motocross Machines Loaded Kit
Introduction
Welcome to the GASGAS bicycle assembly guide. This document will provide step- by-step instructions to help you assemble your GASGAS bicycle safely and efficiently.
Specifications
| Item No. | Description |
|---|---|
| 1 | GASGAS Front triangle |
| 2 | GASGAS Shock mount axle |
| 3 | Tear shaped nut Shock mount M6x1 |
Assembly Steps
Step 1
Apply thread lock to the screw.
Step 2
Tighten the damper screw connection to 20NM.
Diagram
The diagram below shows the assembly of the GASGAS front triangle, shock mount axle, and tear-shaped nut shock mount M6x1.
FAQ
- Q: What tools do I need for assembly?
- A: You will need a set of Allen keys, a torque wrench, and thread lock.
- Q: How much torque should be applied to the damper screw connection?
- A: The damper screw connection should be tightened to 20NM.
- Q: Where should I apply the thread lock?
- A: Apply the thread lock to the screw before tightening it.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>