Electric Candle TYJ-YZX-6688 Aromatherapy Lamp Instruction Manual
- September 6, 2024
- Electric Candle
Table of Contents
Electric Candle TYJ-YZX-6688 Aromatherapy Lamp
NOTE
Please read the instructions of the candle fragrance lamp carefully before use
and operate it correctly to get a better experience.
Tech Specifications
- Material:metal+crystal
- Product size : L190W120H300mm
- Pairing Name: TYJ-YZX-6688
- Bulb;50w
- Voltage:110-220V
What’s included
- 1xProduct Manual
- 2xLight bulb
INSTALLATION
Product Function Bytton Introduction/No.1
Step 1: Align the bulb with the two big red holes and insert it, Then
turn clockwise to clamp
Product Function Bytton Introduction/No.2
Step 2: Place the scented candles on top of the stand base
Product Function Bytton Introduction/No.3
Step 3: Plug in the power supply
Product Function Bytton Introduction/No.4
Step 4 : Turn on the timer switch Demand setting time and gear The
controller is turned on by default 60 minutes
Product Function Bytton Introduction/No.5
Step 5: Do not put the candle on the side of the base, because it can not
play a better role due to uneven heating
Product Function Bytton Introduction/No.6
Step 6: After 5-6 times of heating, the essential oil on the surface has
evaporated,and a layer of melted wax on the surface needs to be poured out
NOTE
Read all the instructions before using the product. 1. To reduce the risk of
injury. closesupervision is necessary when the product is used near
children.2.Do not expose the device to any moisture.3.Do not use the device in
excess of its output rating. Overloaded outputs above the rating may result in
a risk of fire or\ injury. unpredictable behavior resulting in fire, explosion
or risk of injury. 4. Do not use the device if damaged or modified. Damaged or
modified device may exhibit. Do not disassemble the device.Take it to a
qualified service person when service or repair is required. Incorrect
reassembly may result in a risk of fire or injury.6.This device is not a
toy.7.Do not expose the device to fire or excessive temperature. Exposure to
extreme heat may cause an explosion. Note: Remember! With this Wax melting
table lamp, you don t need to light the candle with open fire after powering
on, which will cause the bulb to explode.