AIMS Power KITHY230VBATMS Lithium Battery Cabinet Instructions
- September 5, 2024
- AIMS Power
Table of Contents
KITHY230VBATMS Lithium Battery Cabinet
Product Information
Specifications
- Model: LFP230V96A-M / LFP230V96A-S
- Power Output: 24.75W
- Manufacturer: AIMS Power, Inc.
- Address: 9550 Gateway Dr, Reno, NV 89521
- Website: www.aimscorp.net
- Email: sales@aimscorp.net
- Phone: 775.359.6703
Product Usage Instructions
Unpacking and Inspection
1. Carefully unpack the lithium battery cabinet.
2. Ensure there is no damage to the cabinet, all wires are
secure, and the cabinet is stable.
3. Check for the included components:
-
Four eyehooks
-
Cabinet key
-
Battery cables from battery cabinet to AIMS Power hybrid
inverter -
COM cable from battery cabinet to AIMS Power hybrid
inverter -
Separate 12V batteries connected in series to power the
cabinet’s BMS
Connections
1. Connect the battery cables from the battery cabinet to the
AIMS Power hybrid inverter.
2. Connect the COM cable from the battery cabinet to the AIMS
Power hybrid inverter.
3. Ensure all connections are secure before powering on the
system.
Additional Components
The cables and fuse kit required to connect the battery cabinet
to the inverter must be purchased separately.
Frequently Asked Questions (FAQ)
Q: Are the cables included to connect the battery cabinet to
the inverter?
A: No, the battery cables and fuse kit needed for this
connection must be purchased separately.
Q: How do I ensure the stability of the cabinet during
setup?
A: Make sure all eyehooks are securely fastened and that the
cabinet is placed on a stable surface.
Lithium Batery Cabinet
LFP230V96A-M LFP230V96A-S The AIMS Power pre-wired lithium battery cabinet is
easy to set up and only requires a few connections to the AIMS Power hybrid
inverter. Unpacking the cabinet Make sure there is no damage to the cabinet,
all wires are secure, and the cabinet is stable. Check for the following
included components:
1. Four eyehooks 2. Cabinet key 3. Battery cables from battery cabinet to
AIMS Power hybrid inverter. 4. COM cable from battery cabinet to AIMS Power
hybrid inverter. 5. Separate 12V batteries connected in series to power the
cabinet’s BMS. The cables and
fuse kit that connect the battery cabinet to the inverter must be purchased
separately. Battery Cabinet Front (BMS)
B1 = Master battery B2 & B3 = Slave battery (if using more than one cabinet)
COM1 = Master COM2 & COM3 = Slave ON/OFF = Power switch ADDR= Dip switch. If
using one battery cabinet, dip switch number one should be in the up position
and all others in the down position. If using two battery cabinets, dip switch
number two should be in the up position and all others in the down position.
If using 3 battery cabinets, dip switch number three should be in the up
position and all others in down position. Dip switch number four is not used
and should stay down. The master battery cabinet works with two slave
batteries max.
Battery Cabinet Back
The back of the battery cabinet is where you will find the ports to connect to
the AIMS Power hybrid inverter. Connect to the AIMS Power hybrid inverter
using the battery cabinet’s terminals labeled P- and P+ and COM ports to the
AIMS Power hybrid inverter’s BAT + and BAT – and COM ports (CAN). More
information about the AIMS Power Hybrid Inverters can be found on the AIMS
Power website. It is recommended to use an inline fuse between the battery and
inverter. Install the fuse closest to the battery cabinet on the positive
cable. A fuse kit can be purchased through AIMS Power direct. NOTE: Do you
reverse the polarity. If the polarity is reversed, it will void warranty. Make
sure all power sources are off when making connections.
Specifications
Voltage DC: 230.4V Amp hours: 96 kWh 22.1 (22,114 watt hours) Cabinet
includes: Quantity 6 38.4V lithium packs prewired in series. Max
charge/discharge current: 50amps Cycle life: >3500 cycles Cut off discharge
voltage: 180V Max charge voltage: 262.8V Efficiency: >97% IP grade: IP54
Operating temp: -4°F to 140°F Charging temp: 0°F to 140°F Weight: 882 lbs
Dimensions (inch): 68.75H x 33.75D x
24.75W
AIMS Power, Inc.
9550 Gateway Dr
Reno, NV 89521
www.aimscorp.net
sales@aimscorp.net
775.359.6703
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>