PEAKEEP MHP3129 Optional 7 Wake up Sounds Alarm Clock Instructions
- September 4, 2024
- PEAKEEP
Table of Contents
- Product Overview
- Specifications
- Features
- Tips
- Setting the Clock Time
- Setting the Alarm
- Turning Alarm On
- Turning Alarm Off
- Snooze Function/Suspend Alarm
- Back light Function
- Replacing Batteries
- Troubleshooting
- Melody does not sound
- Customer Service
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
**PEAKEEP MHP3129 Optional 7 Wake up Sounds Alarm Clock Instructions
**
Product Overview
Specifications
- Operating Temperature: 14℉ to 122℉.
- Operating Voltage: 4.0V to 4.50V DC
- Accuracy: -0.8 to 1.2 sec /day at 4.50V DC at 78.8℉.
- Average Current Consumption: 190uA at 4.50V DC at 78.8℉
- Alarm Setting Accuracy: ±5min against setting time
- Alarm sounds:
- Brook
- Farewell Song
- Waltz of the Flowers
- The Blue Danube
- Rockabye Baby
- Birdsong
- Beep
Features
- Adjustable Alarm Volume
- Selectable Alarm Sounds
- Snooze
- Light
- Ease of use
- Battery operated
Tips
- Please do follow the arrow to turn the knob for settings, or the quartz movement will be damaged or inaccurate.
- Rechargeable and used batteries are not recommended. Generally, the voltage of one rechargeable battery is 1.0V-1.42v, the normal operating voltage of this item is ≥ 4.30 V. Therefore if rechargeable battery or used batteries are inserted, clock will not run correctly few days later due to the low voltage.
- Do not pull the knobs out, which may cause damage to this unit.
- Dropping may cause damage, use with caution!
Setting the Clock Time
Turn the time setting knob following the arrow to get correct clock time.
Setting the Alarm
The smaller scale ring is for the alarm, it indicates 10 minutes per scale for
alarm minute.
Turn the alarm setting knob following the arrow to set the desired alarm time.
Turning Alarm On
Toggle the alarm switch to “ON”, alarm will go off at the time you set and last for nearly 60 minutes.
Turning Alarm Off
Toggle the alarm switch to “OFF”, alarm stops and will no longer work.
Snooze Function/Suspend Alarm
When alarm goes off, press top button to temporarily suspend the alarm for 5 minutes. Snooze function can be repeated approximately 1 hour
Back light Function
- Press top button, clock face will be lightened for 5 seconds.
- Back light lights when alarm is working.
Replacing Batteries
3 brand new AAA 1.5V batteries are included in the box.
Generally, they will power this unit for more than 6 months. For optimal
performance, please replace batteries every 6 months or when
- Clock time runs slowly.
- Light becomes dim.
Troubleshooting
-
Clock does not keep time
Please try to turn the time and alarm knobs following the arrows several times to see if the clock will work fine or not. One possible case is that the hands were just stiff and getting stuck. -
Alarm accuracy
Itʼs not going to be a digital precision on all this type of analog alarm clocks. Generally the alarm is ± 5 minutes against the setting time.
Clock does not work
- Remove the film covered on battery, re-insert battery to start the clock.
- Change another 3 brand new AA batteries to try.
Melody does not sound
- This is most likely due to the sound knob not being in the right position, please try turning the sound knob several times to align the symbol of sound.
- Turn the volume up to max level.
Customer Service
If you encounter any problems using this unit, contact Amazon customer service
for a refund or replacement before Amazon return/replacement window closes. Or
request service at sales@us-myehome.com
with your Amazon order ID, weʼll be committed to make things right for you
without any delay. Thank you for your support.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>