BISMAT 9660000237 Flash Instruction Manual
- September 4, 2024
- BISMAT
Table of Contents
9660000237 Flash
Specifications:
-
Model: 9660000237
-
Expiration Date: 04/2023
-
Torque: 1Nm
-
Screw Type: PZ2
-
Installation: Always install according to local regulations, FP
= Fixed Point -
Website: walraven.com
-
Manufacturer: J. van Walraven Holding B.V., Industrieweg 5,
3641 RK Mijdrecht, The Netherlands -
Dimensions: 67,419 mm
Product Usage Instructions:
1. Pre-Installation:
Before starting the installation process, ensure you have all
the necessary tools and equipment required for the job. Inspect the
product for any visible damage.
2. Installation Process:
Follow these steps to install the product correctly:
-
Locate the designated installation area based on local
regulations. -
Use the provided torque specifications (1Nm) and the
appropriate screw type (PZ2) for installation. -
If the Fixed Point (FP) installation method is required, ensure
to follow the guidelines accordingly.
3. Post-Installation:
Once the product is securely installed, double-check all
connections and fittings. Test the product to ensure it functions
as intended.
Frequently Asked Questions (FAQ):
Q: What should I do if I encounter difficulties during
installation?
A: If you face challenges during installation, refer to the user
manual for troubleshooting tips or contact our customer support for
assistance.
Q: Can I use this product for outdoor installations?
A: It is recommended to check with local regulations and
manufacturer guidelines to determine if this product is suitable
for outdoor use.
Instructions for use BISMAT® Flash
1
2
3
4
5
9660000237 / 04/2023 Full content subject to modifications
6
7
M6: 1Nm / PZ2 Always install according to local regulations FP = Fixed Point
walraven.com
!
FP
J. van Walraven Holding B.V., Industrieweg 5, 3641 RK Mijdrecht, The
Netherlands
67,419 mm
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>