PERSONALHOUR Le Palier 2.7 High Legs Premium Pilates Foldable Pilates Machine Installation Guide

Le Palier 2.7 High Legs Premium Pilates Foldable Pilates Machine

“`html

Product Specifications:

• Brand: Le Palier
• Model: 2.7
• Product Type: Pulley Tower Reformer
• Website: www.personalhour.com

Product Usage Instructions:

Step 1: Checking and Unpacking

Open the package and ensure all parts are present:

• Bed body x1
• Square box x1
• Thicken the pull rope x2
• Pulley plate x1
• Shoulder-neck bolster x2
• Universal pulley bearing x2
• Plug x2
• Limit pull pin x2
• Pedal x1
• T-board x1

Second Step: Assembly

1. Insert 5 shoulder-neck bolster into the hole of 4 pulley
   plate.

2. Use tool 7 plug to install 6 universal pulley bearing on one
   side of the bed.

3. Place the strap of 3 thicken the pull rope on top of 5
   shoulder-neck bolster.

4. Thread one end of the rope from 3 through 6 universal pulley
   bearing.

Third Step: Final Assembly

1. Connect rope cleat 3 thicken the pull rope and 3 pulley plate
   together.

2. Check the final installation of 3 thicken the pull rope.

3. Install 8 limit pull pin in the hole of 1 bed body.

4. Directly insert both 9 and 10 into the side hole of 1 bed body
   as needed.

FAQ:

Q: How do I troubleshoot if my Pilates Reformer is not running

smoothly?

A: Follow these steps:

1. Check if the reformer is level using a spirit level.

2. Clean and ensure the runners and wheels are free from dirt and
   grit.

3. Verify that the side wheels are correctly adjusted.

4. Inspect and replace any damaged wheels or bearings.

Q: How do I remove the carriage for maintenance?

A: To remove the carriage:

1. Remove shoulder rests and unlock them if necessary.

2. Release the ropes from the rope lockers.

3. Fold down the rope risers and rotate the pulleys flat towards
   the runner.

4. Unscrew and remove the two carriage stoppers at the open end of
   the runner.

5. Gently slide out the carriage, being careful not to damage the
   wheels.

“`

Le Palier 2.7 Installations
Installations Instructions
WWW.PERSONALHOUR.COM

Installation Instruction
Step 1 :Open the package and check that all the parts are in order

01 02 03

04

05 06

07

08

09

10

01 Bed body”1 02 Square box*1 03 Thicken the pull rope”2 04 Pulley pIate”1 05 Shoulder-neck boIster”2

06 Universal pulley bearing”2 07 Plug2 08 Limit pull pin2 09 PedaI”1 10 10 T-board”1

Pulley Tower Reformer Installations

PAGE 2

Second step

1. Insert 5 shoulder-neck bolster into the hole of 4 pulley plate

2. Use tool 7 plug to install 6 universal pulley bearing on one side of the bed

3. Put the strap of 3 thicken the pull rope on top of 5 shoulderneck bolster

4. Pass one end of the rope from 3 through 6 universal pulley bearing

Pulley Tower Reformer Installations

PAGE 3

Third step

5. Connect rope cleat 3 thicken the pull rope and 3 pulley plate together

6. This is the final result after installing 3 thicken the pull rope

7. Install 8 limit pull pin in the hole of 1 bed body

8. Both 9 and 10 can be directly inserted into the hole on the side of . 1 .You can choose to install

Pulley Tower Reformer Installations

PAGE 4

Periodic Maintenance, Care & Safety Checks
Please check the apparatusbefore first use and aftereach of the first few uses to check all the fittingsare securely fastened. Thereafter, it is important to follow a regular maintenance schedule by someonefamiliar with the equipment and record your maintenance checks.Equally inspection shouldbe made immediately if any part appears not be operating correctly or somethingappears to be loose.
Springs – Inspect for signs of wear,Iook for deformnation, kinks, gaps and corrosion. Springs showing signs of damage must not be used and must be replaced immediately. Springs must be replaced every 2 years or after 3,000 hours,whichever is first, or immediately if showing signs of fatigue or deformation Foot Bar – check all allen bolts securing the padded bar to the aluminium arms and to the steel engagement bar and through the frame are tight Runners ensure the runners are regularly cleaned and kept free from dirt as thisis the main cause for a noisy reformer. If excess dirt is spotted on the runners then the wheels may also need cleaning. We recommend cleaning the runners with a window cleaner such as windowlene. Ropes and Handles – check ropes for signs of wear, frayingor nicks and replace if damaged.Check stitching on handles is intactandd handles are not overly worn. PVC U pholstery – always ensure belts, jewellery and shoes are removed when working on the equipment as buckles,rings,watches and bangles can all end up damaging the upholstery.For cleaning upholstery we recommend cleaning with Gym Wipes Wheels – Remove the carriage and check for smooth rotation, if the wheels are not turning smoothly or are scarred or damaged this will impede smooth and quiet running of the equipment and the wheels need to be replaced. Shoulder Rests – check the pads are securely bolted on to the metal frame- if looseretighten. Spring hooks – hand check that all eyehooks will not move. If loose remove,appIy loctite and retighten. Check that the spring retention bungee is correctly attached. Nuts & Allen Bolts – check all nuts and bolts are tight, including those on the Silent rope pulley wheels and those securing the head rest.

Pilates Reformer with Half-Trapeze Tower

PAGE 5

2.Troubleshooting Smooth Running of your Reformer
If you reformer is not runningsmoothly and quietlyplease follow these step in order to getit back up and running smoothly:
A.Check the reformeris level using a spiritlevel B.Check the runners and wheels are clean and free from dirt and grit C.Check the side wheelsare correctly adjusted D.Check the wheels and bearings are not damaged.If damaged replace.
3.Removing the Carriage For Maintenance
From time to lime you may need to removethe carriage eitherto deep clean the wheels& runners or to changethe springs or wheels. Removing the carriage is easily done and no tools are required. To do this follow these steps
A. Remove shoulderrests, unlocking them first if they were locked B. Release the ropes from the rope lockers C. Fold down the rope risers and rotatethe pulleys so theyare flat and pointingtowards the runner D. Remove the two carriagestoppers at the open end of the runner-these can be unscrewedby hand E. Now gently slide the carriage out
Remember when puttingthe carriage back in to be carefulnot to damage the wheels when inserting them in to the runner- this job is best done by two people
If you ordered the Let Palier with edu system, contact PersonalHour to activate your certificate

Pilates Reformer with Half-Trapeze Tower

PAGE 6

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>