KitchenAid 300 Series Commercial Blender Instruction Manual
- September 3, 2024
- KitchenAid
Table of Contents
KitchenAid 300 Series Commercial Blender
GET BLENDING
DISCOVER MORE
AT KITCHENAIDCOMMERCIAL.COM
For demo videos, product registration, and more — our quick start page has
what you need to help you get the most from your new product.
KitchenAidCommercial.com |
KitchenAid.ca | KitchenAid-Latam.com
USA: 1.800.584.4315 | Canada: 1.800.807.6777
INSTALLATION INSTRUCTIONS
The KitchenAid Commercial Blender allows you to customize your blending for any recipe you make with the turn of a dial. For complete instructions, go online to www.kitchenaidcommercial.com.
-
Install the back cover onto the rear of the blender base. Ensure the tab on the base is aligned with the opening on the back cover.
-
Secure both sides of the back cover over the tabs on the either side of the blender base.
-
Install thumb screws on both sides of the back cover. Tighten each thumb screw clockwise, by hand, until secure.
-
Secure the front cover to the back cover.
-
Attach the removable power cord and plug into a grounded 3 prong outlet. Flip POWER switch on the back of the blender base to the ON (I) position. The blender is now ready to operate.
**
Electrical Shock Hazard**
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death, fire, or electrical
shock.
For more detailed information about the KitchenAid Commercial Blender, please Pour obtenir plus d’informations sur refer to your instructions manual.