ASi 9018-41 Baby Changing Station User Guide
- June 14, 2024
- ASI
Table of Contents
ASi 9018-41 Baby Changing Station
Specifications
- Dimensions: Closed: 39-5/32 x 28-1/4 x 3/8 [995 x 718 x 10] Open: 39-5/32 x 28-1/4 x 18-1/8 [995 x 718 x 460]
- Construction: Type 304 Stainless Steel – Matte Black Powder Coated FDA-approved fungus and bacteria-resistant plastic bed
- Mounting: Recessed
- Capacity: Tested to sustain a static load of 250 lbs (113 kg) with minimal deflection
Product Usage Instructions
Installation
The Rough Wall Opening (RWO) required is 35-1/2 W x 24-1/2 H x 4 D minimum [902 x 622 x 102]. Follow the provided installation guidelines for proper setup.
Operation & Maintenance
Ensure the product is used according to its intended purpose. Regularly clean and maintain the unit to ensure optimal performance and longevity.
FAQ
- Q: What is the warranty for Model #9018-41?
- A: The warranty is five (5) years from the date of the invoice.
- Q: What materials are used in the construction of this\ product?
- A: The product is constructed with Type 304 Stainless Steel and FDA-approved fungus and bacteria-resistant plastic.
- Q: Is this product compliant with any standards?
- A: Yes, the unit complies with 2010 ADA Accessibility Standards, ASTM F-2285 & F-2388, G-21, G-22, ANSI Z535, ANSI 117.1, EN 12221-1, and EN 12221-2 (IncludingA1:2013).
Product Overview
This horizontal station has a door facing and collar made from 20 gauge 304 stainless steel. Fabricated of FDA-approved fungus and bacteria-resistant plastic. Unit complies with 2010 ADA Accessibility Standards, ASTM F-2285 & F-2388, G-21, G-22, ANSI Z535, ANSI 117.1, EN 12221-1, and EN 12221-2 (Including A1:2013). Tested during development to sustain 250 lbs (113 kg) static load with minimal deflection. Recessed Mounting
Dimension
Key Features & Specifications
-
ADA, ASTM F-2285 & F-2388 (100 lbs [45.4 kg] static load test required), G-21, G-22, ANSI Z535, ANSI 117.1, EN 12221-1, and EN 12221-2 (Including A1:2013) compliant. Damped gas spring aids one handed operation using less than 5lbs force (22.2N) – no tight grasping, pinching or twisting of the wrist.
-
Includes one integral bag hook and bed-liner dispenser (convertible to a multi-fold towel dispenser).
-
Door facing and flange dress trim are made of 20 gauge Type 304 Stainless Steel – Matte Black Powder Coated.
Changing Surface is fabricated of FDA-approved fungus and bacteria-resistant HDPE.
Designed to support an infant up to 3 ½ years old and a weight up to 50 lbs (23 kg). -
The bed is designed to cradle a child’s body. An adjustable two-part, vinyl-coated safety strap with a Sure-Lock latch aids in safety
Operation & Maintenance
Unit platform is shaped to keep a child restrained from rolling out of the bed. Unit is easily opened and closed by user with one hand in any location and handle cavity is provided on door face for preferred use. Unit is operable with less than 5 Lbf (22.2N) while not requiring any tight grasping, pinching or twisting of the wrist. Bed liner/towel dispenser presents liners or towels for user hygiene and convenience. Dispenser lid is provided for sanitary protection and ease of loading of wipes or liners. Safety strap is easily adjustable by user for baby size and the Sure-Lock latch securely resists opening until released by opposing finger pressure by adult caretaker/parent. Liners/towels are easily replenished by service personnel as required.
Technical Information / Product Properties
Installation
Installation instructions along with operation and maintenance manuals are provided with each unit. Unit is recess mounted using hardware supplied through concealed mounting holes. The hardware kit supplied has fasteners suitable for metal or wood stud walls in dry locations and general hollow wall construction where adequate substrate strength is obtained. Fasteners and anchors for masonry walls are not provided. Wall reinforcement must be suitable to sustain the transfer of maximum unit loading. Mounting hole plug covers are supplied to conceal fasteners after installation. Provide a Rough Wall Opening (RWO) of the required depth from face of the finished wall. Mount unit in properly framed RWO using four (4) #10 x 1-1/2″ [M5x38] self-threading pan head screws through side holes. For alternate rear holes mounting see the installation instructions packed with unit. Alternate suggested mounting where wall depth and framing reinforcement permits is to use four (4) 3/8″ x 2″ [M10x51] lag screws (or other fasteners appropriate for wall conditions, not supplied) through mounting holes in rear wall of the cabinet. Use washers and mounting hole plug covers provided. If surface mounting this unit using an optional dress collar use hardware provided if appropriate or other hardware suitable for site conditions (by others). Follow the procedure in the instructions provided
Rough Wall Opening (RWO) required is 35-1/2″ W x 24-1/2″ H x 4″ D minimum [902 x 622 x 102]
Warranty
Five (5) Years from date of Invoice
Contact
- American Specialties, Inc.
- 441 Saw Mill River Road, Yonkers, NY 10701
- 914-476-9000
- www.americanspecialties.com
Manufacturer reserves the right to make changes to the design, dimensions or functionality of the product without formal notice