minimotors DUALTRON CITY Electric Scooter User Manual

: September 2, 2024
: MINIMOTORS

Table of Contents

minimotors DUALTRON CITY Electric Scooter
Diagram And Functions
Specifications
Packing List
Bluetooth Connection
Assembly
How to Ride
Folding
Read User Manual Online (PDF format)
Download This Manual (PDF format)

minimotors DUALTRON CITY Electric Scooter

Specifications

Product: Dualtron City
Battery: 60V20Ah CN / 60V25AhcLG or Samsung
Rider: Up to 70km / 90km range
Display: New EY3 display (DUALTRON APP available)
Motor: BLDC Hub Motor, 1200W*2
Machine Weight: 41.9 kg
Max Load: 120kg
Speed: 25km/h
Dimensions: Approx.1140mm x Approx.190mm
Recommended Terrain: Asphalt/flat pavement; obstacles < 5 cm; gaps < 5 cm
Brake Type: Electric Brake (Hydraulic Brake)
Charger Input Voltage: 100-120V/200-240V~
Tire Type: 15inch wide tube tire
Tire Pressure: 50 psi
Suspension: Rubber suspension(front)+replaceable suspension(rear,cartridge design)

Assembly

QR lever locking slide:
Release the QR lever, raise the locking slide upwards, raise the steering tube, then lower the locking slide downward. Tighten the finishing screw properly to lock the QR lever so that the locking slide is firmly fixed in any direction, and check for looseness during use.

Handlebar Assembly:
Loosen the QR lever, pull the locking slide inward and raise the handlebar, then close the QR lever and tighten the set screw. Place the locking slide up to the safety line and lock it so that it is firmly fixed with the QR lever. Always check for looseness during use.

How to Ride

Power on the scooter: Choose the speed mode via the Dualtron app before riding.
Starting: Stand on the footboard with one foot, push off with the other foot to start gliding. Ensure SAFE mode is disabled (deactivate via Dualtron app by squeezing brake lever).
Acceleration: Put both feet on the footboard, stand stably, and pull the throttle to speed up.
Deceleration: Slow down by releasing the throttle.

FAQ

Q: How do I pair my scooter with the Dualtron app?
A: Power on the scooter, open the app, click on “Search vehicle,” and follow the on-screen instructions to pair your scooter.

Q: What should I do if I experience issues with acceleration?
A: Check the throttle connection, battery level, and speed mode settings. If issues persist, contact customer support for further assistance.

Scan the QR code to download the latest user materials and obtain the latest updates and safety instructions.

DUALTRON
The dream of electric technology.

Pictures for reference only, subject to our existing products.

Diagram And Functions

Handlebar Functions

Name	Function	Operation method

Turn Signal Button

| ****

Turn on/off the left/right signal

| Press the left/right side of the Turn Signal Button, the left/right turn signal will keep blinking.
ON/OFF

Headlight Button

| ****

Turn on/off the headlight

| ****

Press the Headlight Button, the headlight is on;Press it again,the headlight is off.

Horn Button

| ****

Turn on the horn

| ****

Press the Horn Button, the scooter will beep once.

Warning Light Button

| ****

Turn on the warning light

| Press the Warning Light Button,the left&right signals will keep blinking until press the Warning Light Button again.
**E**

Driving mode selection button

| ****

Turn on ECO / TURBO mode

| ****

Switch modes through pressing the button.

Accelerator| Speed up| Pull the throttle to accelerate.

Specifications

	Item	Parameter
Product	Model	Dualtron city

Battery

| Battery Capacity| 60V20Ah CN / 60V25Ah（LG or Samsung）
Range| 70km / 90km
Charging Ambient Temperature| 0 to 40°C (Battery temperature exceeds 55°C,BMS start protection program.)
Battery Management System| Over-heating, short circuit, over-current, over- discharge and over-charge protection

Rider

| Max. load| 120kg
Recommended Age| 16–60 years old
Required Height| 3’11”-6’6”(120-200 cm)

Display

Machine

Brake

| Type| Hydraulic Brake
---|---|---
Electric Brake| ABS&EBS (Indicating the battery temperature exceeds 55°C,BMS start protection program,ABS/EBS fails.）

Charger

| Input Voltage| 100-120V/200-240V~
Max. Output Voltage| 66.4V 1.75A

Tire

| Type| 15inch wide tube tire
Tire Pressure| 50 psi
Material| Rubber

Suspension

| Type| Rubber suspesnsion(front)+replaceable suspension(rear,cartridge design)
Optional|

Disclaimer: this is not a legal opinion or legal advice. The information provided herein (including in the App) is for your convenience and information purpose only. It is not intended to cover every piece of law and/or regulation that may be applicable to this product. DUALTRON explicitly hereby disclaims any and all warranty and/or representation, express or implied, related to completeness, accuracy, up-to-date of such information. DUALTRON reserves the right but not obligation to correct, implement and/or update the information. You shall use the information at your own risk. It is your sole responsibility to learn and understand any and all the law and/or regulation, requirements, prohibition, restriction and/or limitation imposed by either law, government authority, court, private party or the others that may apply to your use of this product.
Theoretical Range: tested while riding with a full battery, 75 kg load, 25°C, at the speed of 25 km/h on average on pavement.
Typical Range: tested while riding with a full battery, 75 kg load, 25°C, at the speed of 50 km/h on average on pavement. (Some of the factors that affect range include speed, number of starts and stops, ambient temperature, etc. )
Max.Speed: tested while riding with a full battery,75kg load,25°C,straight road on flat road with no wind. (Some environmental factors can affect max speed,uneven roads, crooked roads, temperature, wind, etc.)

Packing List

Accessories

Bluetooth Connection

APP Download Guide

Method 1

Scan the QR code to download the APP.
Choose the mobile phone system that suits you to install,and register / log in.

Method 2

Search “DUALTRON” in the application and download it,and register / log in.

Pair the Bluetooth on the APP

Power on the scooter.

Click “Search vehicle” and pair with your scooter. * The scooter is connected to the Dualtron app when the Bluetooth symbol lights up.
Select “bind as owner”.
(No one else can connect, only people authorized by you are allowed to connect. Authorizations are created on the app.)

Assembly

Release the QR lever,raise the locking slide upwards, raise the steering tube, then lower the locking slide downward.
Tighten the finishing screw properly to lock the QR lever so that the locking slide is firmly fixed in any direction, and check for looseness during use.
Loosen the QR lever, pull the locking slide inward and raise the handlebar, then close the QR lever and tighten the set screw.
Place the locking slide up to the safety line and lock it so that it is firmly fixed with the QR lever. Always check for looseness during use.

How to Ride

Power on the scooter and choose the speed mode. * Please choose the speed mode before riding! Note:Speed mode can be choose via the Dualtron app.
Stand on the footboard with one foot and push off with the other foot to start gliding. *Make sure you have disabled SAFE mode.(SAFE mode setting via Dualtron app.Deactivate safe mode by squeezing brake lever.)
Put both feet on the footboard and stand stably. Pull the throttle to speed up.
Slow down by releasing the throttle and squeezing brake levers.
To turn, shift your body and turn the handlebar slightly.
Please watch out for road conditions, sufficient turning space is required.

When hard braking, serious danger or injury may occur. Maintain a moderate speed and look out for potential hazards.

Folding

Loosen the QR lever, push the locking slider inward and fold the handlebars down.

Loosen the QR lever and move the locking slide upward. You must hold the steering tube with your hand to prevent falling down and hitting.
Lay the steering tube down while raising the locking slide.