PROSAFE XP3000 Chemical Protection Overshoes Instructions
- September 2, 2024
- PROSAFE
Table of Contents
PROSAFE XP3000 Chemical Protection Overshoes
Product Specifications
- Abrasion Resistance: > 2000 cycles
- Tensile Strength: > 60N
- Flex Cracking Resistance: > 100,000 cycles
- Puncture Resistance: > 10N
- Trapezoidal Tear Resistance: > 40N
- Seams Strength: > 75N
- Resistance to Liquid Penetration: R > 95%
Frequently Asked Questions
Q: Are the ProSafe XP overboots suitable for all sizes?
A: Yes, the overboots are designed to fit all sizes due to their adjustable elastic and ties.
Q: How do I know if the overboots are damaged and need replacement?
A: Inspect the overboots regularly for any signs of wear, tear, or damage. If you notice any defects, replace them immediately to ensure continued protection.
Q: Can the overboots be used in combination with other protective clothing?
A: Yes, you can wear the ProSafe XP overboots with other appropriate protective gear to enhance overall protection.
INSTRUCTIONS FOR USE
Please read carefully before using! You are required to enclose this information leaflet when passing on the personal protective equipment, or to present it personally to the recipient. You may therefore reproduce this leaflet at your own discretion.
-
ProSafe XP is the modell name for chemical protection overboots of polymer coated fabric with elastic and ties.
-
Manufacturer of the garment.
-
CE-marking – The overboots correspond to the European standards for personal protective equipment of categorie III.: Centro Tessile Cotoniero e Abbigliamento S.p.A. (Centrocot), Piazza Sant’Anna 2, 21052 Busto Arsizio VA notified body n. 0624 (Regulation (EU) 2016/425 for Personal Protective Equipment – module C2 and module D). The Notified Body chosen for Conformity to type assessment is: Centrocot NB 0624).
-
The european standards for chemical protective clothing define six types of protection, witch are symbolized in one pictogram:
- Typ 1 – gas tight clothing
- Typ 2 – non gas tight clothing
- Typ 3 – Liquid tight clothing
- Typ 4 – Spray tight clothing
- Typ 5 – Particle tight clothing
- Typ 6 – Limited splash tight clothing
DS products specification correspond to the protection types of the European standards. ProSafe XP overboots offer protection of type PB 3B. The size table combines the body measurements with the standard sizes.
- The ProSafe XP overboots are ONE SIZE fits all.
- The Symbol of the „Open Book“ remembers the wearer to familiazize himself with the „Instructions for Use“.
- ProSafe XP overboots are antistatically treated and offer electrostatic protection according to EN1149-1. The person wearing the electrostatic dissipative protective clothing shall be properly earthed. The resistance between the person skin and earth shall be less than 108 Ω e.g. by wearing adequate footwear on dissipative or conductive floors; Electrostatic dissipative protective clothing shall not be open or removed whilst inpresence of flammable or explosive atmospheres or while handling flammable or explosive substances; electrostatic dissipative protective clothing is intended to be worn in Zones 1, 2, 20, 21 and 22 (see EN 60079-10-1 [7] and EN 60079-10-2 [8]) in which the minimum ignition energy of any explosive atmosphere is not less than 0,016 mJ; electrostatic dissipative protective clothing shall not be used in oxygen enriched atmospheres, or in Zone 0 (see EN 60079-10-1 [7]) without prior approval of the responsible safety engineer the electrostatic dissipative performance of the electrostatic dissipative protective clothing can be affected by wear and tear, laundering and possible contamination electrostatic dissipative protective clothing shall be worn in such a way that it permanently covers all non-complying materials during normal use (including bending movements).
- ProSafe XP overboots are tested against infective agents according to EN 14126:2003.
- The five care-pictograms indicate:
Performance profile of ProSafe XP protective overboots****
| Physical Properties | Unit | Result | Test Method | Class |
|---|---|---|---|---|
| Abrasion resistance | Cycles | > 2000 | EN 530 – method |
2
| 6
Tensile strength| N| > 60| EN ISO 13934-1| 2
Flex cracking
resistance
| Cycles| > 100 000| EN 7854| 6
Puncture resistance| N| > 10| EN 863 – EN
13034
| 2
Trapezoidal tear
resistance
| N| > 40| EN ISO 9073-4| 3
Seams strength| N| > 75| EN ISO 13935-2| 3
Resistance to liquid
penetration
| | not applicable| EN ISO 17491-4
met. A EN 13034
| not
applicable
Resistance to penetration to
liquid
| P| R| | P| R
Sulphuric acid (H₂SO₄)| < 1%| > 95%|
EN ISO 6530 EN 13034
| 3/3| 3/3
Sodium hydroxide (NaOH)| < 1%| > 95%| 3/3| 3/3
o-xylene| < 1%| > 95%| 3/3| 3/3
Butan-1-ol| < 1%| > 95%| 3/3| 3/3
P = Penetration incex (%penetrated); R = Repellancy index (%repelled); Remark:
For further information concerning the barrier performances please contact DS.
EEC-declaration of conformity available under
ProSafe® XP3000 chemical protective overshoes | DS SafetyWear
TYPICAL AREAS OF APPLICATION:
ProSafe XP protective overboots are used to protect employees from hazardous
substances or sensitive products and work processes against human
contamination. Depending on the hazard potential of the chemical and the
exposure conditions, they are used to protect against fine particles and
sprays of liquids.
PREPARATIONS:
Do not use faulty overboots. In the event of functional defects, please notify
DS. Correct dressing ensures safe handling.
RESTRICTIONS ON USE: Please ensure that you have selected the appropriate
protective suit for your application. If you have any questions, please
contact your ProSafe XP overboots supplier or DS. The decision as to which
protective equipment (gloves, respiratory protection, etc.) ProSafe XP
overboots can be combined with and how long they can be worn in certain
individual cases (with regard to wearing comfort and thermal stress) is always
the sole responsibility of the user. DS accepts no liability for improper use.
STORAGE:
The PPE can be stored for at least 5 years
- (see ), provided there are no signs of damage. ProSafe XP overboots can be stored in a standard commercial manner, cool and dry, without direct exposure to sunlight. DISPOSAL: ProSafe XP overboots can be disposed of in an environmentally friendly manner either thermally or in landfill sites. The method of disposal depends solely on the contamination during use.
- LOT NO