SACOMA Smart Body Composition Scale User Manual

SMART BODY
COMPOSITION SCALE
Manual

SPECIFICATIONS

FOREWORD

Thank you for choosing our Smart Body Composition Scale! This scale is now your personal health assistant. In order to guarantee an accurate measurement and a long service life of the scale, please read this manual before using and keep it for further reference.
This Smart Body Composition Scale could help you keep track of your personal health data. It records and analyzes the information from your scale, then transfer the data to your mobile device via wireless transmission technology. You can view your health data at any time of the day by downloading the free app.

@SACOMA.NL

DISPLAY STRUCTURE

PRODUCT DESCRIPTION

1. Battery volume
2. Connected
3. Weight units
4. Body weight| 5. BMI
6. Muscle rate
7. Bone mass
8. Indicates your health status| 9. Body fat rate
10. Body water rate
11. Body Heart rate
---|---|---

PLACE & USE

Place the scale on an even and dry surface. As soon as the LED screen shows 0.0 kg, you can step on the scale.

The lower part of the scale provides conductance. Therefore, make sure that your feet are always symmetrical on the scale.

APP DOWNLOAD

After you downloaded the App, do not forget to turn on your bluetooth.

http://www.wellandtec.com/fitdays/

INSTRUCTIONS

1. Make sure the scale is charged.
2. After using or moving the scale for the first time, you need to place the scale on a horizontal dry and hard surface.
3. Power on: place one foot on the scale for approx. 1 second or press the button on the top. The scale starts working when the LED screen displays “0.00kg”.
4. Auto power off (Power Saving Mode): If there is no operation or weight change on the scale within 15 seconds, it will shut down.

APP INSTRUCTIONS

Create an account

1. Turn on Bluetooth and open the Fitdays app.
2. Click on “Register”.
3. Go through all the fields and click on “Next”.
4. Set your personal data and click on “Confirm”.
5. Stand on the scale with your bare feet, the weighing will start automatically.
6. Wait until the weighing is complete. Your health data will be visible in the App.

USER DATA

1. Charts
   Click on the “Charts” button to view and compare your data per day, week, month or year. This way you can see at a glance whether you have made progress or not.

2. User data
   Then click on the “User data” button. Here you can click on any date you like and view and compare your health data.

3. Contrast
   Click “ ” in the top right corner and click on “Contrast”. Then click on the two desired weightings and click on to start comparing the measurement data.

4. Share data
   Click “ ” in the top right corner and click on “Export”. Choose whether you want to export all data or only for the past month. Then click on to share the information with your friends via Facebook or Instagram, among others.

ACCOUNT

1. Add user
   Click on the “Account” button and then click on “Add User”. Then go through all the steps and click on “Confirm”. You have now added a user.

2. Delete user
   Click on the “Account” button. To delete a user, swipe the user to the left and select “Delete”.

3. Setting
   From your account, click on “Settings”. Here you can set goals, change units, change your password and connect your Fitbit.

SYNC WITH FITNESS APPS

Apple Health

1. Open the `Health’ app on your iPhone and click on your account in the top right corner.
2. Click on “Apps” and then click on “Fitdays”.
3. Turn on all categories to make the Fitdays app work optimally.

Google Fit

1. Go to settings and select “Google Fit”
2. Turn on the “Google Fit” button, then log in with your Google account.
3. You will be automatically redirected to the “Google Fit” page.

Fitbitt App

1. Go to settings and select “Fitbit”
2. Turn on the “Fitbit” button, then log in with your Fitbit account.
3. Select “Allow” to access the Fitbit app.
4. After pairing, the data is synced to the Fitbit app. You can view the data via the app as well as on the website.

Samsung Health app

1. Go to settings and select “Samsung Health”
2. Turn on the “Samsung Health” button, then log in with your Samsung account.
3. You will be automatically redirected to the “Samsung Health” page.

CALIBRATE

Have you moved or turned the scales? Then we recommend that you calibrate the scale to ensure the accuracy of the measurements.

1. Place the scale on an even and dry surface.
2. Place one foot on the scale until the LED screen responds.
3. The calibration process is complete when the LED display shows “0.00kg”.

RECOGNITION FUNCTION

After the first weighing, the scale has an automatic recognition function. When the weight deviates more than ±2KG from the previous measurement, the app asks if the correct user has been selected. An envelope icon with a notification will appear on the app home page.

1. Claim weight
   Click on the notification and click on “Claim”. You can now link the weight measurement to the correct account.

2. Remove weight
   Is the measurement incorrect? Then click on “Select”, then check the incorrect measurement and click on “Delete”.

FAQ

Why doesn’t the scale work? Why does the data on screen disappear in a flash?

– First check if the scale is fully charged. When the scale is fully charged, place one feet on the scale for approx. 10 seconds. Contact us if the scale still does not switch on after completing these steps.

The scale cannot connect with App.

1. Check that the phone’s software is iOS 8.0 or higher or Android6.0 or higher.
2. Download and open the newest version of the Fitdays App.
3. Enable Bluetooth on your phone. For Android 6.0 or higher, location needs to be enabled

No body fat measured when weighing.

1. Step on with dry and bare feet
2. Ensure Bluetooth is enabled and working
3. Ensure personal data is entered.

ATTENTION

Safety precautions:
When using digital scale, certain basic safety precautions must be followed, including the following:

1. The Bluetooth scale should not be used to diagnose or treat any medical condition. You should consult a doctor when undertaking any diet or exercise program.
2. If you are pregnant or have a pacemaker or other internal device,you should not over rely on the data provided by this product. All data is for reference and is not a substitute for advise from a licensed health care professional.
3. Check the device before each use. Do not use the device if damaged. The continuous use of a damaged unit may cause injury or improper results.

Note:

1. Scale is a high-precision measuring device. Never jump or stamp on the scale or disassemble. Please handle the scale carefully to avoid breakage.
2. Place the scale on a hard, flat surface during use. Using the scale on a soft surface like carpet or linoleum may affect the accuracy of the scale readings.
3. To ensure weighing accuracy, please gently step on the scale to wake it up and wait at least 10 seconds before weighing on the scale. You must also wake up the scale if it has been moved. Take your measurements at the same time each day to ensure the most accurate results.
4. Before using the scale, make sure you have entered all your personal data through the Fitdays app.
5. Use the scale while barefoot. The scale cannot measure body fat percentage if you’re wearing shoes or socks.
6. Make sure your feet are dry before weighing yourself.
7. This scale is not waterproof; never immerse the scale in water. To clean the surface, use a damp cloth or glass cleaner. Do not use soap or other chemicals.

This device complies with part 15 of the FCC Rules. Operation ;s subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
FCC ID:2ANDX-CK10A

100% SATISFACTION GUARANTEE
We guarantee all our products are designed to the highest standard, we base our ethos on customer satisfaction. This means the customer experience and journey you have had with us should be exceptional. If you have experienced our customer service or product, please let us know by leaving
us an honest review.

INFO@SACOMA.NL

COPYRIGHT © 2021 SACOMA. ALL RIGHTS RESERVED.
The material in this publication is protected under International and Federal Copyright Laws and Treaties, and as such, any unauthorized reprint or use of this material is strictly prohibited. No part of this book may be reproduced or transmitted in any form without the written permission of the author, except for the inclusion of brief quotations in a review. Reproduction or translation of any part of this
work without the permission of the copyright holder is against the law.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>