NAVIHUA NH8801 Source For Hino Ranger Truck Instruction Manual
- September 6, 2024
- NAVIHUA
Table of Contents
NH8801 Source For Hino Ranger Truck
“`html
Product Specifications:
-
Power System: 12V car system with grounding wire
-
Reset Function: Yes
-
Bluetooth Connectivity: Yes
-
Installation Recommendation: Professional installation
advised -
Operating Environment: Avoid wet environments or water
Product Usage Instructions:
Safety Instructions:
1. Read all instructions carefully before installation.
2. Machine is suitable for car 12V power system with a grounding
wire.
3. Do not install in a 24V car to prevent damage.
4. Do not replace the power fuse without professional
guidance.
5. Avoid watching programs or operating the unit while
driving.
6. Professional installation recommended to avoid damage or
accidents.
7. Avoid placing the product in wet environments or water.
8. Turn off the car and disconnect ACC and B+ connections before
installation to prevent short circuits.
Reset Instructions:
1. Reset the machine before initial use or after replacing the
car battery.
2. Reset if the unit malfunctions.
3. Restore factory settings in the setting interface to reset
the machine.
4. Press the Reset button on the panel or click System Reset in
System Settings to return to factory state.
Functional Operation:
Main Menu:
-
Switch between original and added navigation interface by
long-pressing MENU key. -
Touch to navigate main menu, sub-menus, and close screen.
-
Swipe left or right to clear background programs.
-
Drag from top down for system notification bar.
System Settings:
-
Access WiFi, language, audio, and system functions in System
Settings. -
Navigate to Navigation Settings for additional options.
Bluetooth:
Access Bluetooth application interface from the main system
interface. Pair with phone for full functionality.
Frequently Asked Questions (FAQ):
Q: Can I install this product in a 24V car?
A: No, this machine is only suitable for a car 12V power system
with a grounding wire. Installing it in a 24V car can cause
damage.
Q: How do I reset the machine?
A: You can reset the machine by pressing the Reset button on the
panel with a pointed object or by clicking System Reset in System
Settings to return it to the original factory state.
“`
Warm prompt For your safety, please do not watch videos or operate machines
while driving; When driving, please adjust the volume to the level that you
can hear the outside sound clearly. Before starting the operation, please read
this manual and other manuals of the operating system in detail, understand
this manual and relevant safety tips and warning slogans on the machine, and
put them in the accessible place for reference at any time after reading. 1.
Pay attention to traffic safety first. 2. If you encounter difficulties in
operating the system, please park your car in a safe place before operating.
3. Do not allow children to operate the machine, so as to avoid personal
injury and machine damage. 4. Please follow the traffic rules when using the
satellite navigation function. 5. Please do not use electronic equipment or
open fire prohibited places, such as gas stations, wineries, electromagnetic
strong interference areas, otherwise it may cause danger. 6. Do not maintain,
maintain or install the machine by yourself. Do not install or repair the
machine with power on. It is very dangerous to install or repair the machine
by persons who are not trained or inexperienced in the installation of
electronic equipment or vehicle accessories 7. Do not install the machine or
stored in direct sunlight place, don’t put it in other hazardous substances in
the environment, especially the LCD screen, if the installation of the LCD
screen is in the air conditioning ventilation near, please keep cool and hot
air blows directly to the machine, otherwise it may damage the machine, and
even harm the car and personal. 8. Do not scratch the display screen with
sharp objects, and do not press the display screen vigorously with hard
objects, otherwise it will cause damage to the display screen or touch screen.
9. In order to ensure the normal operation of the machine and prevent the
occurrence of fire or electric shock, please do not expose the machine to the
damp air, let alone sprinkle the liquid on the machine.
Tips and Warnings
To highlight some important information in the user manual,
You should pay special attention when you see this tag , which represents some
important warnings and prompts.
Note: Due to continuous improvement of product functions, this manual is for
reference only. Matters needing attention
Safety note
Please read all instructions carefully before installation, and it is
recommended
that the machine be installed by a car audio professional.
This machine is suitable for car 12V power system (must have a grounding
wire), please do not install this equipment on the 24V car, otherwise it will
damage the machine.
Do not replace the power fuse without professional guidance. Improper use of
the fuse will cause damage to the machine or cause fire.
In order to avoid violating traffic rules, drivers are not allowed to watch
the program and operate the unit while driving, so as to avoid unnecessary
traffic accidents
For the sake of safety and ensure the normal use of the product, please hand
over to the professional installation of the product, do not disassemble and
repair the machine, so as not to cause damage to the machine or accident,
details, please consult with the local professional car audio sales shop.
Please avoid placing the product in wet environment or water to avoid electric
shock caused by short circuit or other unwanted damage or fire.
Note: To prevent short circuit, please turn off the car and disconnect
the connection between ACC and B+ before installation.
The machine is reset 1. The machine must be reset before using the system for
the first time or after replacing the
car battery. 2. The unit must be reset when it does not function properly. 3.
Click “Restore Factory Settings” in the setting interface to restore the
machine to the original
factory state. 4. Press the Reset button on the panel with a pointed object,
or click System Reset in System
Settings, and the machine will be shut down and returned to the original
factory state.
Note: Restoring factory Settings will lose the previous time and setting
values.
Functional operation
The main menu Each time the machine starts up, the original interface will be
displayed. Long press the MENU key of the original car to switch to the added
navigation interface. First display the main menu, touch to return to the main
interface, touch to return to the menu of the next level, touch to close the
screen, as shown below
To slide touch , you can swipe your finger left or right to clear programs running in the background
Drag from the top down, the page will appear a system notification bar, at the same time in the
operation
of
the
function
is
more
convenient
the application interface The vehicle-mounted system supports, voice control,
traffic recorder (optional), reversing image (optional), mobile phone
interconnection, Bluetooth, online music, online navigation and other
functions. Click “Application” on the main menu to enter the application
interface. Click the ICONS of each module, you can enter the relevant
functions. In any state, scroll down the page and press the main menu key or
the return key to return to the main interface, as shown below:
System Settings Click “Settings” on the main menu interface to enter the
system Settings interface, which includes WiFi, language, audio, system and
system information functions. Click “Navigation Settings” on the screen to
enter the secondary menu interface of navigation Settings, and so on, as shown
in the following figure:
bluetooth Click “Bluetooth” in the main interface of the system to enter the Bluetooth application interface. When the Bluetooth is paired with the phone, all the ICONS in the interface will be lit up
In the Bluetooth interface, click “Bluetooth Music” to enter the Bluetooth
music playing interface.
The movie Click “Movie” on the main interface and enter the video playback
interface. You can play the audio and video files in the system or the
multimedia files in external SD card and USB. Support AVI, MP4, RMVB and other
formats; Double-click the screen to display the full screen state. Click any
touch area under the full screen to directly return to the operation
interface.
Local music Click “Local Music” on the main interface to play video and audio
files in the system or external SD card and USB, supporting MP3, WAV, MID and
other formats
File manager Click “Application” in the main menu interface, look for the file
manager icon to enter, file management can copy the contents of the local
memory to the host memory
Scott navigation Click “maps” in the main interface to enter the AutoNavi
navigation interface
Digital instrument Click the digital instrument on the main interface to enter the application interface. This function supports the dynamic display of engine speed, speed, remaining fuel consumption, outside temperature,etc
Carplay
Click Z-Link in the main interface to enter the application interface, you can wirelessly connect to
the iPhone. The feature requires a Bluetooth connection and then automatically connects to
Apple’s
CarPlay
sound Click on the sound in the application interface to enter the application
interface, which supports 16 segments of digital sound adjustment
Function parameters specifications Working voltage: DC 12V Operating voltage
range: 9V~16V Maximum working current: 3A Video part Standard: NTSC, PAL
(automatic recognition) Input: 1VP-P (75 ohm) Display section Screen size: 8.8
“/10.25″ /12.3” Screen type: TFT/IPS Resolution: 1280480P/1920720P The
environment Operating temperature: -20~+70 Storage temperature: -30~+85
Working humidity: 45%-80% Storage humidity: 30%-90%
Asked Questions
Frequently
1. Problem: no response to key operation (protocol failure), abnormal display, flower screen
Reason: model setting is not correct
Solution: enter the factory Settings to set the good model
2. Problem: No Bluetooth function
Reason: There is no Bluetooth pairing and connection with mobile phone
Solution: Enter the Bluetooth Settings and check the machine name and password
3. Problem: No navigation signal
Reason: No embedded navigation antenna or incorrectly set GPS antenna
Solution: Correctly embed GPS antenna
4. Problem: GPS doesn’t locate
Reason: poor GPS signal or poor GPS antenna connection
Solution: move the position or replace the GPS antenna or reconnect the GPS antenna
5. There is no video on the dashcam
Reason: wrong type of dashcam
Solution: System Settings – Factory Settings -ARM Related Settings – Dashcam Settings –
Choose USB recorder or CVBS recorder, etc 6. No display of reversing vehicle Reason: Wrong choice of reversing camera Solution: enter the reversing Settings inside the Settings, choose the original car or rear camera, 360 panoramic reversing, etc
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures: -Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver. -Connect the
equipment into an outlet on a circuit different from that to which the
receiver is connected. -Consult the dealer or an experienced radio/TV
technician for help. -This equipment complies with FCC radiation exposure
limits set forth for an uncontrolled environment. This equipment should be
installed and operated with minimum distance 20cm between the radiator & your
body.