Sharkoon VK2 RGB Euro Housing with Ribs Instruction Manual

: August 31, 2024
: sharkoon

Table of Contents

VK2 RGB Euro Housing with Ribs
Specifications:
Product Usage Instructions:
1. Install 2.5 HDDs/SSDs:
2. Install 3.5 HDDs:
FAQ:

VK2 RGB Euro Housing with Ribs

“`html

Specifications:

General:

Form Factor: ATX
Expansion Slots: 7
Interior Painting: Tempered Glass Black, White
Tool-Free Devices Installation: Yes
Cable Management System: Included
Side Panel: Tempered Glass
Color Versions: Black, White
Dimensions (L x W x H): 40.4 x 20.6 x 48.7 cm

RGB Compatibility:

Type: Addressable
Ports: 4
Manual Control: 14 Modes
Mainboard Compatibility: MSI Mystic Light Sync, ASUS Aura Sync,
Gigabyte RGB Fusion Ready, ASRock Polychrome Sync
RGB Pinout: 5V-D-coded-G

Max. Drive Bays:

3.5: 2
2.5: 4

I/O:

USB 3.0 (Top): 2
Audio (Top): TRRS

Fan Configuration:

Front Panel: 3x 120 mm Fan (Pre-installed) or Radiator
(Optional)*
Rear Panel: 1x 120 mm Addressable RGB LED PWM Fan
(Pre-installed)
Top Panel: 2x 120 mm or 2x 140 mm Fan or Radiator
(Optional)
Bottom Panel: 2x 120 mm Fan (Optional)

Compatibility:

Mainboard: Mini-ITX, Micro-ATX, ATX
Max. Length Graphics Card: 35.0 / 37.5** cm
Max. Height CPU Cooler: 16.0 cm
Max. Length PSU: 21.0 cm
Max. Height Radiator incl. Fan (Front): 5.7 cm
Max. Height Radiator incl. Fan (Top): 5.7 cm

Package Contents:

VK2 RGB, Accessory Set

Product Usage Instructions:

1. Install 2.5 HDDs/SSDs:

Detailed instructions for installing 2.5-inch HDDs or SSDs go
here.

2. Install 3.5 HDDs:

Detailed instructions for installing 3.5-inch HDDs go here.

FAQ:

Q: How do I control the Addressable RGB lighting through the

mainboard?

A: To control the Addressable RGB lighting through the
mainboard, follow these steps:

Connect the Addressable RGB LED Fans/Strips to the mainboard’s
Addressable RGB Pin Header.
Use the software corresponding to your mainboard compatibility
for RGB control (e.g., MSI Mystic Light Sync, ASUS Aura Sync).

Q: How can I manually control the Addressable RGB

lighting?

A: To manually control the Addressable RGB lighting, follow
these steps:

Connect the Addressable RGB LED Fans/Strips to the designated
ports on your case.
Press the reset switch to cycle through different RGB
modes.

“`

Manual

Specifications

General:
Form Factor: Expansion Slots: Interior Painting: Tool-Free Devices Installation: Cable Management System: Side Panel: Color Versions: Dimensions (L x W x H):

ATX 7 Tempered Glass Black, White 40.4 x 20.6 x 48.7 cm

RGB Compatibility:
Type: Ports: Manual Control: Mainboard Compatibility:
RGB Pinout:

Addressable
4
14 Modes
MSI Mystic Light Sync, ASUS Aura Sync, Gigabyte RGB Fusion Ready, ASRock Polychrome Sync
5V-D-coded-G

Max. Drive Bays:

3.5″

2

2.5″

4

I/O:
USB 3.0 (Top): Audio (Top):

2 (TRRS)

Fan Configuration:
Front Panel: Rear Panel: Top Panel: Bottom Panel:

3x 120 mm Fan (Pre-installed) or Radiator (Optional)* 1x 120 mm Addressable RGB LED PWM Fan (Pre-installed) 2x 120 mm or 2x 140 mm Fan or Radiator (Optional) 2x 120 mm Fan (Optional)

Compatibility:
Mainboard: Max. Length Graphics Card: Max. Height CPU Cooler: Max. Length PSU: Max. Height Radiator incl. Fan (Front): Max. Height Radiator incl. Fan (Top):

Mini-ITX, Micro-ATX, ATX 35.0 / 37.5** cm 16.0 cm 21.0 cm 5.7 cm 5.7 cm

Package Contents:
VK2 RGB, Accessory Set

Installation of a 360 mm radiator can conflict with installation of a 3.5″ HDD ** Without front fan

01

Install 2.5″ HDDs/SSDs
02

Install 2.5″ HDDs/SSDs
03

Install 2.5″ HDDs/SSDs
04

Install 3.5″ HDDs

Optional

Optional 05

Install 3.5″ HDDs
06

Install Add-On Cards
07

Detach Dust Filters
08

Install Fans
09

Install Radiator under Top Panel
120 mm 140 mm 240 mm 280 mm Radiator
10

Install Radiator behind Front Panel
120 mm 140 mm 240 mm Radiator 280 mm 360 mm
11

Control Addressable RGB through Mainboard
Addressable RGB LED Fans / Strips

Addressable RGB LED Fans / Strips

SATA

+5V D ADD_HEADER

Mainboard Addressable RGB Pin Header

12

Manually Control Addressable RGB
Addressable RGB LED Fans / Strips
RESET SW

Addressable RGB LED Fans / Strips

SATA

Red

Green

Blue

White Yellow Cyan

RGB Mode 7

Press reset switch to select different modes

Pink

RGB

Mode 6 Mode 5 Mode 4 Mode 3 Mode 2 Mode 1

Press reset switch for 2 seconds to turn off the LED lights. When the LED lights are off, press reset switch to turn on the LED lights.
13

Note
Legal Disclaimer For potential loss of data, especially due to inappropriate handling, Sharkoon assumes no liability. All named products and descriptions are trademarks and/or registered trademarks of the respective manufacturers and are accepted as protected. As a continuing policy of product improvement at Sharkoon, the design and specifications are subject to change without prior notice. National product specifications may vary. All rights reserved especially (also in extracts) for translation, reprinting, reproduction by copying or other technical means. Infringements will lead to compensation. All rights reserved especially in case of assignation of patent or utility patent. Means of delivery and technical modifications reserved.
Disposal of your old products Your product is designed and manufactured with high quality materials and components, which can be recycled and reused.
When this crossed-out wheeled bin symbol is attached to a product, it means the product is covered by the European Directive 2012/19/EU. Please be informed about the local separate collection system for electrical and electronic products. Please act according to your local rules and do not dispose of your old products with your normal household waste. The correct disposal of your old product will help prevent potential negative consequences to the environment and human health.
14

Follow us on social media!
Facebook Instagram YouTube
TikTok X
Sharkoon Technologies GmbH Grüninger Weg 48 35415 Pohlheim Germany © Sharkoon Technologies 2024