Sharkoon VK2 RGB Mid Tower Cases Owner’s Manual
- August 31, 2024
- sharkoon
Table of Contents
Sharkoon VK2 RGB Mid Tower Cases
Specifications
- Product Name: VK2 RGB
- Form Factor: ATX
- Expansion Slots: 7
- Interior Painting: Tempered Glass
- Tool-Free Devices Installation: Yes
- Cable Management System: Yes
- Side Panel: Dimensions (L x W x H): 40.4 x 20.6 x 48.7 cm
Features
- Gaming Design: The VK2 RGB features a playful front panel design and tempered-glass side panel, suitable for various gaming setups.
- Expandable Airflow: Pre-installed with three 120 mm fans and one 120 mm RGB LED fan, expandable to up to eight fans with dust filter protection.
- Water-Cooling Support: Supports 240 mm or 280 mm radiator on top panel and 360 mm radiator behind the front panel for demanding systems.
- Sufficient Space for Data Storage: Accommodates up to two 3.5 HDDs or four 2.5 SSDs at different locations inside the case.
- Connections Near the Front: Features two USB 3.0 ports and a TRRS port for headsets on the top of the case.
- Tidy Inside: Equipped with a power supply tunnel and ample space for cable management to keep the interior organized.
Product Usage Instructions
Installation of Fans or Radiators
To enhance airflow, you can install additional fans or radiators in different
locations:
- Front Panel: Comes pre-installed with three 120 mm fans, upgradeable to a radiator if needed.
- Rear Panel: Includes one 120 mm Addressable RGB LED PWM fan for added aesthetics.
- Top Panel: Supports two 120 mm or 140 mm fans or radiators for cooling options.
- Bottom Panel: Optional installation of two 120 mm fans for increased airflow.
Cable Management
Utilize the provided cable management system to keep cables organized and
maintain a tidy interior:
- Use cable ties and routing channels to neatly arrange cables and prevent clutter.
- Ensure cables do not obstruct airflow or components within the case.
Installation of Storage Devices
Follow these steps to install HDDs or SSDs in the VK2 RGB:
- Identify suitable locations for your storage devices based on your setup requirements.
- Securely mount the HDDs or SSDs in the designated bays within the case.
- Connect the necessary power and data cables to the installed storage devices.
FAQ
-
Q: Can I control the RGB lighting of the VK2 RGB case?
A: Yes, the RGB lighting of the VK2 RGB case is compatible with various RGB software such as MSI Mystic Light Sync, ASUS Aura Sync, Gigabyte RGB Fusion Ready, and ASRock Polychrome Sync. You can control the RGB lighting through manual control or synchronize it with your motherboard for unified lighting effects. -
Q: What is included in the package of the VK2 RGB case?
A: The package includes the VK2 RGB case itself along with an accessory set containing necessary screws and tools for installation.
VK2 RGB
The VK2 RGB is an ATX case that is suitable for a wide range of gaming setups
thanks to its spacious design, refined looks, and a side panel made of
tempered glass. Four fans are already pre-installed for a strong airflow. This
can be expanded to comprise up to eight fans or, for maxi-mum performance,
radiators with a size of up to 360 mm. There is also sufficient space for HDDs
and SSDs as well as tidy cable management.
Features
-
GAMING DESIGN
With the subtly playful look of the front panel and a tempered-glass side panel, the VK2 RGB is ideal for many different kinds of gaming setup and perfectly blends into all kinds of surroundings. -
EXPANDABLE AIRFLOW
Three 120 mm fans and one 120 mm RGB LED fan are already pre- installed in the VK2 RGB, but this can be easily expanded to up to eight fans. The areas of air intake are protected by dust filters. -
WATER-COOLING SUPPORT
For demanding systems, and instead of fans, the VK2 can be equipped with a 240 mm or 280 mm radiator under the top panel and a 360 mm radiator behind the front panel. -
SUFFICIENT SPACE FOR DATA STORAGE
Up to two 3.5“ HDDs or four 2.5“ SSDs can be conveniently installed in different locations inside the VK2 RGB. -
CONNECTIONS NEAR THE FRONT
For peripheral devices, two fast USB 3.0 ports and a TRRS port for headsets are available on the top of the ATX case. -
TIDY INSIDE
To keep the inside of the VK2 RGB orderly and tidy, the case is provided with a power supply tunnel as well as sufficient space for cable management.
Specifications
| Product Name | VK2 RGB |
|---|---|
| Form Factor | ATX |
| Expansion Slots | 7 |
| Interior Painting | |
| Tool-Free Devices Installation | |
| Cable Management System | |
| Side Panel | Tempered Glass |
| Dimensions (L x W x H) | 40.4 x 20.6 x 48.7 cm |
| Max. Drive Bays | |
| 2 x 3.5“ | 4 x 2.5“ |
| I/O | |
| USB 3.0 (Top): 2 | Audio (Top): TRRS |
| Fan Configuration | |
| Front Panel | 3x 120 mm Fan (Pre-installed) or Radiator (Optional)* |
| Rear Panel | 1x 120 mm Addressable RGB LED PWM Fan (Pre-installed) |
| Top Panel | 2x 120 mm or 2x 140 mm Fan or Radiator (Optional) |
| Bottom Panel | 2x 120 mm Fan (Optional) |
| RGB Compatibility | |
| Type | Addressable |
| Ports | 4 |
| Manual Control | 14 Modes |
| Mainboard Compatibility | MSI Mystic Light Sync, ASUS Aura Sync, Gigabyte RGB |
Fusion Ready, ASRock Polychrome Sync
RGB Pinout| 5V-D-coded-G
Compatibility|
Mainboard| Mini-ITX, Micro-ATX, ATX
Max. Length Graphics Card| 35.0 / 37.5 cm
Max. Height CPU Cooler| 16.0 cm
Max. Length PSU| 21.0 cm
Max. Height Radiator incl. Fan (Front)| 5.7 cm
Max. Height Radiator incl. Fan (Top)| 5.7 cm
Package Contents|
VK2 RGB, Accessory Set|
EAN Code**|
VK2 RGB Black| 4044951041206
Installation of a 360 mm radiator can conflict with installation of a 3.5“ HDD
Without front fan