MAIDEN HOME The Thompson Canopy Bed Installation Guide
- August 31, 2024
- MAIDEN HOME
Table of Contents
MAIDEN HOME The Thompson Canopy Bed
Product Usage Instructions
Component Labels:
Please note that all horizontal posts, headboard posts, and footboard posts
are labeled with numbers to ensure proper assembly. The labels are located at
the ends of the horizontal posts and next to the receiving bracket of the
headboard and footboard posts. As shown in the diagram, the numbers on the
horizontal posts correspond with the numbers on the headboard and footboard
posts.
Assembly Instructions:
-
Connect Headboard Post to Headboard:
To connect each headboard post to the headboard, insert the pre-attached rail fastener into the footboard fitting and press down firmly to lock it in place. -
Connect Side Rails to Headboard:
To connect each side rail to the headboard, insert the pre-attached rail fastener into the headboard fitting and press down firmly to lock it in place. -
Connect Footboard Post to Side Rail:
To connect each footboard post to each side rail, insert the pre-attached rail fastener into the footboard fitting and press down firmly to lock it in place. -
Connect Footboard Post to Footboard:
To connect each footboard post to the footboard, insert the pre-attached rail fastener into the footboard fitting and press down firmly to lock it in place.
Frequently Asked Questions (FAQ):
-
Q: How many people are required for assembly?
A: Assembly requires 2 people for optimal setup and safety. -
Q: How many slats are included for different bed sizes?
A: Queen and king beds have 14 slats, while California king beds have 15 slats.
Components & Hardware
Component Labels
Please note that all horizontal posts, headboard posts, and footboard posts are labeled with numbers to ensure proper assembly. The labels are located at the ends of the horizontal posts and next to the receiving bracket of the headboard and footboard posts. As shown in the diagram, the numbers on the horizontal posts correspond with the numbers on the headboard and footboard posts.
Assembly Instructions
- To connect each headboard post to the headboard, insert the pre-attached rail fastener into the footboard fitting and press down firmly to lock it in place.
- To connect each side rail to the headboard, insert the pre-attached rail fastener into the headboard fitting and press down firmly to lock it in place.
- To connect each footboard post to each side rail, insert the pre-attached rail fastener into the footboard fitting and press down firmly to lock it in place.
- To connect each footboard post to the footboard, insert the pre-attached rail fastener into the footboard fitting and press down firmly to lock it in place.
- To connect the horizontal posts to the headboard and footboard posts, slot the attached brackets into the receiving brackets. Be sure to match the numbers on the ends of the horizontal posts to the corresponding numbers on the headboard and footboard posts, which are located near the receiving brackets.
- Attach the L brackets to the horizontal posts with the screws provided. Use the pre-drilled holes to guide placement of the brackets.
- Screw the center support legs into the center support rail, with the metal T-nuts facing upward.
- Place the center support rail inside the bed frame. Adjust the glides on the center support legs as needed, ensuring the legs stand straight and are flush to the floor.
- Place the slats inside the bed frame. Note that the slat pocket is designed to be slightly wider than the slat for ease of assembly.
The illustrations below display the various configurations of the Thompson canopy bed.
Review the checklist below to ensure your Thompson canopy bed is properly assembled.
- Ensure all slats are present.
- Ensure all slats are lying flat.
- Ensure all hardware is firmly connected.
- Ensure center support legs are level.
- Ensure all 4 L bracket are securely installed on the horizontal posts.
- Should you need to move this piece for any reason— including installing a rug beneath it—disassemble it first, then reassemble in the desired position.
hello@maidenhome.com
888-513-5754