MAIDEN HOME The Thompson Bed Installation Guide
- August 31, 2024
- MAIDEN HOME
Table of Contents
The Thompson Bed
“`html
Product Specifications:
- Headboard (1)
- Center Support Legs (3)
- Side Rails (2)
- Footboard (1)
- Assembly requires 2 people.
- Queen and king beds have 14 slats while California king beds
have 15 slats.
Product Usage Instructions:
1. Connecting Side Rails to Headboard:
Insert the pre-attached rail fastener into the headboard fitting
and press down firmly to lock it in place.
2. Connecting Side Rails to Footboard:
Insert the pre-attached rail fastener into the footboard fitting
and press down firmly to lock it in place.
3. Attaching Center Support Legs:
Screw the center support legs into the center support rail, with
the metal T-nuts facing upward.
4. Placing Center Support Rail:
Place the center support rail inside the bed frame. Adjust the
glides on the center support legs as needed to ensure they are
straight and flush to the floor.
5. Installing Slats:
Place the slats inside the bed frame. Note that the slat pocket
is slightly wider than the slat for ease of assembly.
Frequently Asked Questions (FAQ):
Q: What should I do if I need to move the Thompson Bed?
A: If you need to move the bed for any reason, including
installing a rug beneath it, disassemble it first, then reassemble
it in the desired position.
“`
The Thompson Bed
Assembly Instructions
hello@maidenhome.com 888-513-5754
The Thompson Bed
Components & Hardware
Headboard (1)
Center Support Legs (3)
Slats (1415) Center Support Rail (1)
Side Rails (2)
Footboard (1)
Assembly requires 2 people.
Queen and king beds have 14 slats while California king beds have 15 slats.
The Thompson Bed
Assembly Instructions
1 To connect each side rail to the headboard, insert the pre-attached rail
fastener into the headboard fitting and press down firmly to lock it in place.
The Thompson Bed
Assembly Instructions
2 To connect each side rail to the footboard, insert the pre-attached rail
fastener into the footboard fitting and press down firmly to lock it in place.
The Thompson Bed
Assembly Instructions
3 Screw the center support legs into the center support rail, with the metal
T-nuts facing upward.
The Thompson Bed
Assembly Instructions
4 Place the center support rail inside the bed frame. Adjust the glides on the
center support legs as needed, ensuring the legs stand straight and are flush
to the floor.
The Thompson Bed
Assembly Instructions
5 Place the slats inside the bed frame. Note that the slat pocket is designed
to be slightly wider than the slat for ease of assembly.
The Thompson Bed
Assembly Instructions
The illustrations below display the various configurations of the Thompson
bed.
Queen & King 14 slats
California King 15 slats
The Thompson Bed
Assembly Checklist
Review the checklist below to ensure your Thompson bed is properly assembled.
Ensure all slats are present. Ensure all slats are lying flat. Ensure all
hardware is firmly connected. Ensure center support legs are level. Should you
need to move this piece for any reason– including installing a rug beneath
it–disassemble it first, then reassemble in the desired position.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>