peppr S4G Pro POS Station User Manual
- August 30, 2024
- peppr
Table of Contents
**peppr S4G Pro POS Station User Manual
**
Product List
Please check the following parts before use:
-
host computer
-
power adapter
-
point-touch pen
Device
-
Power Button
When the device is off, short press the button to turn on it.
When the device is an, long press for 4 seconds to soft power-off and for 11 seconds to hard power-off -
Main Screen
Touch screen for operator use -
Subscreen
Touch screen for customer use
Interface Introduction
Usage Method – Steps to start S4G Pro
- Press the Power Button, and the screen lights up. After the first boot interface shows up, follow the prompts to operate. Two internet access modes are available for this device.
- Wireless Network Connection: Click the wireless network you want to connect to on the welcome interface and enter the password (if any) to connect;
- Wired network connection: you can connect to the network through the network cable after plugging it into the network port.
Technical Data
Display parameter | Main Screen: 15.6″,1920*1080 |
---|
Subscreen: 10.1″, 1280*800
Touch screen| Main Screen: G+G, 10 point touch
Subscreen: G+G,10 paint touch
OS| Custom AOSP OS
Sore| 4GB RAM+32GB ROM
WWI| 2.4G/5G, IEEE 802.11 a/b/g/n/ac
Bluetooth| Bluetooth 4.2
Loudspeaker| 2W
Overall size| 438 372 237mm
Power Adapter| INPUT: 100-240V-50/60Hz 1.2A Max OUTPUT: 24V 1.5A
Storage temperature| .201C_eot
Storage humidity| 20°C-60°C
Working temperature| 10-90%RH
Working humidity| 20-80%RH
Beehub Inc
Add: 108 W. 13th Street, Suite 100, Wilmington, DE 19801 in the County of New
Castle, Delaware
Web: peppr.com
Safety Precautions
- Not to be used in places with combustible gases or vapors or combustible dusts.
- Non-professionals shall not disassemble the power adapter: there is a risk of high-voltage electric shock.
- Avoid installation or use in thunderstorms: there is a risk of utility-induced lightning strikes.
- When you notice overheating or smoke, abnormal odor, please cut off the power immediately.
- Do not use it in extremely harsh (extreme cold, heat, humidity) environments. Please use a dry soft cloth to wipe and clean. If necessary, surface deaner spray can be employed after the device is powered off. Please avoid liquid intrusion into the device.
- Dropping shall be avoided in placement. Throwing is prohibited in handling unprotected equipment. Avoid adjusting the angle of the screen with violence.
- Try to use it in a clean and dust-free environment. Avoid the intrusion of small metal objects and insects into the device.
FCC Statement
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if notinstalled and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
RF exposure warning
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.
WARRANTY CARD
HARDWARE PROTECTION.
If something goes wrong with your hardware, it’s covered for up to one year. Please go to peppr.com/support so we can make things right. This limited warranty extends only to You, the original purchaser, and is not transferable to anyone who subsequently purchases, leases, or otherwise obtains the Product from You.
THIS LIMITED WARRANTY DOES NOT COVER AND WE ARE NOT RESPONSIBLE FOR:
- DAMAGES CAUSED BY MISUSE, ABUSE, ACCIDENTS, FIRE, THEFT, DISAPPEARANCE, MISPLACEMENT, FLUCTUATIONS AND POWER SURGES, CONNECTIONS TO IMPROPER VOLTAGE, VIRUSES, MALWARE, RECKLESS, WILLFUL, OR INTENTIONAL CONDUCT;
- DAMAGES CAUSED BY SERVICING NOT AUTHORIZED;
- DAMAGES CAUSED BY USAGE THAT IS NOT IN ACCORDANCE WITH PRODUCT INSTRUCTIONS OR USER MANUALS, FAILURE TO FOLLOW THE PRODUCT INSTRUCTIONS OR USER MANUALS OR FAILURE TO PERFORM CLEANING OR PREVENTIVE MAINTENANCE;
- DAMAGE CAUSED BY A PRODUCT OR PART THAT HAS BEEN MODIFIED TO ALTER FUNCTION ALITY OR CAPABILITY WITHOUT THE WRITTEN PERMISSION
- RESULTS OF NORMAL USAGE, SUCH AS GRADUAL IMAGE DEGRADATION, UNEVEN SCREEN AGING, BURNED-IN BAAGES AND PIXEL FAILURE WITHIN DESIGNED SPECIFICATIONS OR THAT DO NOT MATERIALLY ALTER THE PRODUCTS FUNCTIONALITY
- SOFTWARE, INCLUDING THE OPERATING SYSTEM AND SOFTWARE ADDED TO YOUR PRODUCT THROUGH OUR FACTORY-INTEGRATION SYSTEM, THIRD-PARTY SOFTWARE, OR THE RELOADED SOFTWARE;
- ANY EQUIPMENT OR COMPONENTS THAT WERE NOT INCLUDED IN YOUR PRODUCT AS ORIGINALLY SOLD TO YOU
- NORMAL WEAR AND TEAR;
- MINOR IMPERFECTIONS THAT MEET DESIGN SPECIFICATIONS;
- APPEARANCE DAMAGE OR EXTERIOR FINESH THAT DOES NOT AFFECT FUNCTIONALITY INCLUDING BUT NOT LIMITED TO SCREEN SCRATCHING OR CRACKING;
- MISSING, ALTERATION OR DEFACEMENT OF PRODUCTS SERIAL NUMBER
- WIRELESS DATA SERVICES PROVIDED BY THIRD PARTY PROVIDERS;
- DAMAGE CALISED AS A RESULT OF IMPROPER TRANSPORTATION OR PACKAGING WHEN RETURNING THE PRODUCT
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>