Kynett Flywheel Wall or Rack Adjust connector Instruction Manual
- August 31, 2024
- Kynett
Table of Contents
Flywheel Wall or Rack Adjust connector
Manual for connector (Wall- or Rack Adjust)
The two parts for the Wall – / Rack Adjust
-
How to mount the wall-adjust together.
-
Slide the connector in the wall adjust.
-
Slide the lower part of the wall adjust over the connector. Make sure the holes are aligned.
-
There are 4 bolts and 1 hex key included.
-
Tighten the bolts securely.
-
Tighten each screw one by one until there is no more play in the tubes.
If you have a torque wrench, tightening torque approximately 15 Nm, 11 ft-lb -
Check that everything is securely fastened. And it’s ready to use.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>