HAITAO Z-28 3 In 1 Wireless Charging Stand User Manual

HAITAO Z-28 3 In 1 Wireless Charging Stand

Product Information

Product Outline:

The Multifunctional Wireless Charger is a 3-in-1 charging stand designed for mobile phones, watches, and headphones. It features a mobile phone charging area, a watch charging area, a headphone charging area, a heat sink, and a collapsible TYPE-C connector.

Applicable Devices:

• Devices with built-in quick charge/normal charge wireless receiver.
• Devices with outer-face wireless charging receiver.
• Devices with wireless charging receiver in its protection case.

Note: All devices must be Qi standard compatible for wireless charging.

Product Usage Instructions

1. Connect the wireless charger to an AC power supply using the provided power adapter.
2. Turn on the wireless charger and wait for the blue light to blink 3 times and enter standby mode.
3. Place your device vertically or horizontally in the center of the Wireless Charger until it starts charging.
4. Charging status indicators:
   • Standby mode: Blue light off
   • Phone charging: Blue light on
   • Headset and phone charging together: Both devices’ lights on
   • Watch charging: Refer to the watch’s own indicators

Product Introduction

Thanks for purchasing our products 3 in 1 wireless charging stand. It adopts high-end quick charge QC,with its luxury and compact design,it can be compatible with any mobile phones with QI standard. it can perfectly compatible with Sam sung, Apple fast charge wireless function,to save more time effectively and improve your charging experience.

Product Outline

Applicable Devices

1. Devices with built-in quick charge/normal charge wireless receiver.
2. Devices with outer-face wireless charging receiver.
3. Devices with wireless charging receiver in its protection case .

Note: All devices must be Qi standard.

Instructions

1. Use the power adapter to connect the wireless charger to the AC power supply, turn on the wireless charger, and turn off the blue light after blinking for 3 times, and enter the standby mode.
2. Place your device vertically or horizontally in the center of the Wireless Changer until your device begins to charge.
3. The standby light is off, the phone is blue when charging, the headset and the phone are blue when they are together, the watch needs to look at the watch itself when charging, (Note: if the watch has no electricity, the charge will be slower, it is recommended that the watch be charged when it is close to 10%, no electricity, the charge will be slower, may need to wait for 1 hour, need to be patient!)

Specifications

• Model No.: Z-28
• Input power : 27W (MAX)
• Package Size: 71x71x25mm
• Input voltage: 5V/3A 9V/3A
• Output power: 15W/10W/7.5W/5W
• Charging efficiency: 70%-80%

Standard Accessories

• 1* Multifunctional Wireless Charger
• 1* User Manual
• 1* USB Cable

Attention

1. Please keep the charger away from water or other liquid.
2. If you need to clean the charger, please make sure it is power off.
3. Using Environment temperature remain 1-45℃ degree.

FAQ

Q: What devices are compatible with the wireless charger?
A: Devices with built-in or external Qi-standard wireless receivers are compatible with the charger.
Ensure your device is Qi-compatible for optimal performance.

Q: How do I know when my device is fully charged?
A: The charging status indicators on the charger will help you monitor the charging process. Once fully charged, the device’s indicator may also show a full battery icon.

FCC STATEMENT

Warning

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.
   Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radiofrequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The FCC certification of this device refers to RF exposure testing performed in typical operating conditions, where a person is no closer than 20 centimeters from the device surface at all times, except for non-repetitive patterns with transient time intervals in the order of a second. Only in the stated conditions, the device is shown to fully comply with the FCC RF Exposure requirements of KDB 447498.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>