HAITAO HT-520 4 In 1 Foldable Multifunction Wireless Charger with LED Lamp User Manual

HAITAO HT-520 4 In 1 Foldable Multifunction Wireless Charger with LED

Lamp

Multifunctional Wireless Charger

Product Introduction

The Multifunctional Wireless Charger is a high-end quick charge LED lamp wireless charger that is compatible with any mobile phones with QI standard. It is designed to save more time effectively and improve your charging experience with its luxury and compact design. It can perfectly compatible with Samsung, Apple fast charge wireless function.

Product Outline

• LED desk lamp
• Collapsible design
• LED desk lamp touch switch
• USB Type-C
• USB Type-A
• Mobile phone charging module
• Watch charging module bracket
• Indicator light
• Heat dissipation hole
• Headphone and mobile phone wireless charging module
• Non-slip mat

Applicable Devices

The Multifunctional Wireless Charger is compatible with devices that have the following:

1. Built-in quick charge/normal charge wireless receiver (Samsung Note 8, iPhone 8, etc.)
2. Outerface wireless charging receiver (Samsung Galaxy S3, S4, S5 ,Note 3, Note 4, LENOVO, XIAOMI, etc.)
3. Wireless charging receiver in its protection case (iPhone 5/5s, iPhone 6, iPhone6p, etc.)

Note : All devices must be Qi standard.

Specifications

• Input power : 36W(MAX)
• Output power: 15W/10W/7.5W/5W/3W
• Input voltage: 5V3A, 9V3A
• Charging efficiency: 70%-80%
• Dimension: 148521222mm

Product Usage Instructions

1. Connect the wireless charger to the AC power supply through the power adapter.
2. Turn on the wireless charger.
3. The indicator light turns blue within 3 seconds.
4. The indicator light turns red and goes into the standby state.
5. Place your compatible device on the charging module.
6. Your device will begin charging.

LED Desk Lamp Instructions

The LED desk lamp has three adjustable levels:

1. Warm light
2. Cold and warm
3. Combined cold and warm light

To turn off the LED desk lamp, press the lamp a fourth time.

Attention

1. Please keep the charger away from water or other liquid.
2. If you need to lean the charger, please make sure it is power off.
3. Using environment temperature should remain between 1-45 degrees Celsius.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Radiation Exposure Statement: This device complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. During the operation of device a distance of 15 cm surrounding the device and 20 cm above the top surface of the device must be respected.

Product Introduction
Thanks for purchasing our product quick charge LED lamp wireless charger. It adopts high-end quick charge IC ,with its luxury and compact design, it can be compatible with any mobile phones with QI standard. it can perfectly compatible with Sam sung, Apple fast charge wireless function , to save more time effectively and improve your charging experience.

Product Outline

Applicable Devices

1. Devices with built-in quick charge/normal charge wireless receiver (Samsung Note 8 , iPHONE 8 , etc)
2. Devices with outerface wireless charging receiver (Samsung Galaxy S3, S4, S5 ,Note 3, Note 4, LENOVO,XIAOMI , etc.)
3. Devices with wireless charging receiver in its protection case iPhone 5/5s, iPhone 6, iPhone6p, etc.)

Note: All devices must be Qi standard.

Instructions

1. Connect the wireless charger to the AC power supply through the power adapter, turn on the wireless charger, the indicator light turns blue within 3 seconds, and then the indicator light turns red and goes into the standby state.
2. Place your device vertically or horizontally in the center of the Wireless Changer until your device begins to charge.
3. The LED indicator light will become steady blue when charging mobile phone.
4. Watch wireless charging module assembly: This product is compatible with Apple Watch wireless charging module and Samsung Watch wireless charging module. Samsung’s can be installed directly, and Apple’s needs to add silicone accessories. When installing, open the back cover to a 90° angle. Then the USB end goes through the hole in the cover.
5. The LED desk lamp has three adjustable levels, the first level is warm light, the second level is cold and warm, and the third level is combined cold and warm light. Press the lamp a fourth time to turn off.

Specifications

• Input power : 36W(MAX)
• Dimension: 148521222mm
• Charging efficiency: 70%-80%
• Output power: 15W/10W/7.5W/5W/3W
• Input voltage : 5V3A 9V3A

Standard Accessories

• 1* LED Lamp Wireless Charger
• 1* User Manual
• 1* USB Cable

Attention

1. Please keep the charger away from water or other liquid.
2. If you need to lean the charger, please make sure it is power off.
3. Using Environment tempeature remain 1-45℃ degree.

FCC Rules

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

• (1) this device may not cause harmful interference, and
• (2) this device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Radiation Exposure Statement
This device complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co‐located or operating in conjunction with any other antenna or transmitter. During the operation of device a distance of 15 cm surrounding the device and 20 cm above the top surface of the device must be respected.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>