PHILIPS BVP152/153 Gen 3 Essential LED Flood Owner’s Manual
- August 27, 2024
- Philips
Table of Contents
PHILIPS BVP152/153 Gen 3 Essential LED Flood
Specifications:
-
Lamp family code: Essential LED Flood BVP152/153 Gen 3
-
Light source replaceable: No
-
Driver included: Yes
-
Luminous Flux: 1,880 lm
-
Luminous Efficacy: 94 lm/W
-
Correlated Color Temperature: 3000 K
-
Input Voltage: 110 to 277 V
-
Power Consumption: 20 W
-
Operating Temperature: Ambient temperature range
-
Ingress protection code: IP65 [Dust
penetration-protected, jet-proof] -
Mech. impact protection code: IK06 [1 J]
Product Usage Instructions:
Installation:
- Ensure the power supply is turned off before installation.
- Mount the Essential LED MiniFlood Gen 3 in the desired outdoor location using the provided mounting device.
- Connect the flying leads/wires to the appropriate power source (110-277 V).
Maintenance:
- Regularly clean the luminaire to maintain optimal performance.
- Check for any loose connections or damage to the housing.
Dimming (if applicable):
The Essential LED Flood BVP152/153 Gen 3 is not dimmable.
BVP152 G3 LED18/WW 20W 110-277V SWB
20 W, Black
Essential LED MiniFlood Gen 3 comes with a compact and sturdy design. It has a
high-quality housing and corrosion-proof powder coating, suitable for general
outdoor application. High efficiency designed with latest LED technology,
achieves substantial energy savings comparing to conventional floodlights.
Warnings and Safety
- The luminaire shall be installed or maintained by a qualified electrician and wired in accordance with the latest IEE electrical regulations or the national requirements
- The external flexible cable or cord of this luminaire cannot be replaced; if the cord is damaged, the luminaire shall be destroyed.
- The light source of this luminaire is not replaceable; when the light source reaches its end of life the whole luminaire shall be replaced
Product data
General Information
- Lamp family code –
- Light source replaceable No
- Driver included Yes
Light Technical
- Luminous Flux 1,880 lm
- Standard tilt angle posttop –
- Standard tilt angle side entry –
- Luminous Efficacy (rated) (Nom) 94 lm/W
- Correlated Color Temperature (Nom) 3000 K
- Color rendering index (CRI) ≥80
- Luminaire light beam spread 120°
Operating and Electrical
- Input Voltage 110 to 277 V
- Line Frequency 50 or 60 Hz
- Inrush current 1.5 A
- Inrush time 0.1 ms
- Power Consumption 20 W
- Power Factor (Fraction) 0.9
- Connection Flying leads/wires
Cable – Cable 0.6 m without plug
Number of products on MCB of 16 A type B 33
Temperature
Ambient temperature range -40 °C to 50 °C
Controls and Dimming
- Dimmable No
- Driver/power unit/transformer Power supply unit
- Constant light output No
Mechanical and Housing
- Housing Material Aluminum
- Housing Color Black
- Mounting device Mounting bracket adjustable
- Overall height 122 mm
- Effective projected area 0.01 m²
Approval and Application
- Ingress protection code IP65 [Dust penetration-protected, jet-proof]
- Mech. impact protection code IK06 [1 J]
- Surge Protection (Common/Differential) Surge protection level until 2 kV
- Protection class IEC Safety class I
Initial Performance (IEC Compliant)
- Luminous flux tolerance -10% / +10%
- Power consumption tolerance +/-10%
Over Time Performance (IEC Compliant)
Median useful life L70B50 30,000 hour(s)
Product Data
- Order product name BVP152 G3 LED18/WW 20W 110-277V SWB
- Full product name BVP152 G3 LED18/WW 20W 110-277V SWB
- Full product code 872016975167599
- Order code 911401812586
- Material Nr. (12NC) 911401812586
- Numerator – Quantity Per Pack 1
- Net Weight (Piece) 0.270 kg
- EAN/UPC – Product/Case 8720169751675
- Numerator – Packs per outer box 36
- EAN/UPC – Case 8720169751934
© 2024 Signify Holding All rights reserved. Signify does not give any representation or warranty as to the accuracy or completeness of the information included herein and shall not be liable for any action in reliance thereon. The information presented in this document is not intended as any commercial order and does not form part of any quotation or contract unless otherwise agreed by Signify. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V.
2024, July 30 – data subject to change
FAQ
Q: Is the LED source replaceable in the Essential LED MiniFlood Gen 3?
A: No, the light source is not replaceable in this model.
Q: What is the luminous flux of the Essential LED Flood BVP152/153 Gen 3?
A: The luminous flux is 1,880 lm.
Q: Can the luminaire be dimmed?
A: No, the Essential LED Flood BVP152/153 Gen 3 is not dimmable.