Marcytop Outdoor/Indoor Rocking Chair Instruction Manual
- August 26, 2024
- Marcytop
Table of Contents
Marcytop Outdoor/Indoor Rocking Chair
Specifications
- Components : Right Arm, Left Arm, Back, Seat, Support Beam
- Hardware: M6*60MM Bolt (Qty: 102)
- Tools Needed: Hex Spanner, Sanding Sponge for Cleaning
FAQ
- Q: Can I use my own hardware for assembly?
- A: It is strongly recommended to use only vendor-supplied hardware to maintain structural integrity.
- Q: How often should I check the connections?
- A: Hardware may loosen over time, so periodically check that all connections are tight.
THIS ASSEMBLY MANUAL CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE
Important Safety Information
- Please read all instructions carefully before assembling this furniture. For your safety, assembly by two or more adults is strongly recommended.
- Use only vendor-supplied hardware to assemble this item. Using unauthorized hardware could jeopardize the structural integrity of the item. Hardware may loosen overtime. Periodically check that all connections are tight.
Before Assembly
- Remove all parts and hardware from the box. Place all items on a carpeted or scratch-free work surface, as this will avoid damaging parts during assembly. The shipping box provides an ideal work surface.
- To avoid accidentally discarding small parts or hardware, do not dispose of any packaging or contents of the shipping carton until assembly is complete.
- Use the parts and hardware lists below to identify and separate each of the pieces included.
- The use of power tools for assembly is not recommended. Power tools can damage the hardware and/or split the wood.
- Note : Do not fully tighten all bolts until all parts are in place. Failure to follow these instructions may cause the bolts to misalign during assembly.
Care and Cleaning
- Routine cleaning of the furniture can be completed with only warm water and soap.
- You can use the sanding sponge for cleaning.
Components
Hardware
(Fa)
- M6*60MM Bolt
- Qty:12
Tools Needed for Assembly
Instruction
- Step 1
Attach the Right Arm A to the seat D. Secure with bolt F x4
- Step 2
Attach the Left Arm B to the seat D. Secure with bolt F x4
- Step 3
Attach the Back C to the leg Secure with bolt F x4
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>