trevi DAB7F92R DAB AND FM Radio User Guide

: August 24, 2024
: Trevi

Table of Contents

trevi DAB7F92R DAB AND FM Radio
Product Usage Instructions
Switching between FM/DAB/AUX IN and Adjusting Volume:
Menu Settings:

trevi DAB7F92R DAB AND FM Radio

Specifications:

Power Supply: 5V 1A
Rechargeable Battery: 3.7V 2200mAh
DAB Frequency Range: 174.928 – 239.200 MHz
FM Frequency Range: 87.5-108MHz
Dimensions: 165 x 95 x 46 mm
Weight: 347 gr.

Product Usage Instructions

Charging the Battery:

To recharge the device, use a 5V 1A battery charger. Note: If the battery is running low, abnormal behavior may occur; recharge the battery in such cases.

Switching between FM/DAB/AUX IN and Adjusting Volume:

Press the SOURCE button to switch between DAB/DAB+ reception, FM band, and AUX IN input.
Rotate the VOLUME knob to adjust the volume.

Press and hold the desired button.
Press the SELECT button to access the list of received radio stations.
Select a station by pressing the SELECT button.
Press the INFO button to view available information on the display.
Long press the PRESET button to access the radio station saving menu with 20 available memories.
Use the PRESET button to scroll through saved radio stations.

Using Headphones:

Insert headphones into the headphone jack.
Turn on the radio and adjust the volume.

Frequently Asked Questions:

Q: How do I clean the product?
A: For cleaning, use a soft, slightly damp cloth. Avoid solvents or abrasive substances.
Q: What should I do if I encounter any issues with the product?
A: If any problems arise, consult your nearest authorized service center for assistance.

For additional information and updates of this product see: www.trevi.it
If you will not find your language on the instruction manual, please go on our website www.trevi.it to find it

NOTES OF USE

Listen at high volume for long periods, may damage your hearing.

Avoid using it in the following cases:
- Near strong heat sources, such as central heating plants or stoves.
- In very humid places such as bathrooms, swimming pools, etc.
- In very dusty places.
- In places subject to strong vibrations.
- Position the appliance in such a way that there is always enough room for free air circulation (at least 5 cm).
Do not block the air inlets.
If any liquid enters the appliance, unplug it immediately from the socket and take it to the nearest TREVI-authorized service center.
Before switching on the appliance, always check that the power cable and the connection cable are properly installed.
No naked flame sources, such as lighted candles, should be placed on this.
The apparatus shall not be exposed to dripping or splashing water and no object filled with water, such as vases, should be placed on the unit.
Keep this manual for future reference.

CARE AND MAINTENANCE

For cleaning, we recommend the use of a soft, slightly damp cloth. Avoid solvents or abrasives.

IMPORTANT
The good construction of this machine guarantees perfect functioning for a long time. However, should any problem arise, you should consult your nearest authorized service center.

TREVI pursues a policy of continuous research and development. Therefore, the products may have different features from those described

DESCRIPTION

POWER/SOURCE button
ALARM/SCAN button
PRESET button
MENU/INFO button
TU-/CH- button
TU+/CH+ button
VOLUME/SELECT button/ knob
Headphone jack
Power supply socket
AUX IN input

BATTERY RECHARGE

Charge the device with a 5V 1A battery charger (not included) with type-C socket.
Keep charging, until battery icon has “plus sign”.
With the battery running out, a warning message is shown on the display and after a certain time the radio switches off automatically.
Note : with the battery running out, the radio may behave abnormally; in this case proceed with charging the battery

SWITCHING ON/OFF STANDBY

Extend the telescopic antenna.
Press the POWER button (1) to switch on the appliance.
The device will go to the DAB reception system. When first turned on, the device will automatically scan the DAB/DAB + stations.
Only if powered with an external power supply, press the POWER button (1) for a long time to place the appliance in Stand-by mode. The display will show the current time, the battery status and any alarms set.
If powered by battery, press and hold the POWER button (1) to turn off the device.

FM/DAB/AUX IN SELECTION AND VOLUME ADJUSTMENT

Press the SOURCE button (1) to switch between the DAB/ DAB + reception band, the FM band and the AUX IN input.
Turn the VOLUME knob (7) to decrease or increase the volume.

Press and hold the MENU key (4) for a few seconds, the settings menu will appear on the display.
Press the TU- (5) or TU + (6) keys and select the desired item.
Press the SELECT button/knob (7) to enter the settings of the selected item.

The following items are available in the settings menu (some are displayed depending on whether DAB or FM mode is selected):

Scan Setting (FM): allows you to search on FM stations with a strong signal or on all stations found.
Full scan (DAB): selecting this item automatically scans and stores received radio stations.
Manual tune (DAB): select the desired frequency/channel and confirm with SELECT (7). A bar will show the strength of the received signal.
Audio Setting (FM): allows you to select listening in Stereo or Mono
Prune (DAB): allows you to delete from the list of stored stations all the radios found but not available (poor signal).
DRC (DAB): allows you to enable/disable the DRC function to improve the sound when listening in noisy environments. You can set the DRC level to high (high), low (low) or off (off).
System setting: this item allows access to further settings.
Sleep: allows you to set an auto-off timer after which the appliance will go into standby mode automatically. It is possible to select between 90, 60, 45, 30, 15 minutes. With the function activated there is an icon in the shape of a moon with the time remaining before turning off on the display.

In the Off item the function is deactivated.

Alarm: allows you to activate and set two alarms. After selecting ALARM, press the ALARM key (2) to select ALARM 1 or 2 and confirming you enter a submenu in which to set:
On Time: set the activation time of the alarm.
Duration: duration in minutes of the alarm clock.
Source: set the type of ringtone between Buzzer DAB, FM. Selecting DAB or FM is then prompted to select one of the radio stations saved in memory
Frequency: Daily (every day), Once (once only), Weekends (on Saturdays and Sundays), weekdays (from Monday to Friday).
Volume: alarm alarm playback volume, a bar is displayed.
Alarm: On/Off to activate/deactivate the alarm
- `Equalizer: allows you to change the dynamics of the audio being listened to; it is possible to select Normal,
Classic, Jazz, Pop, Rock, Speech, My EQ (custom settings).
Time: allows you to set the current time/date.
Set Time/Date: set the current time and date.
Auto Update: select from which source you automatically set the time and date if available.
Set 12/24 Hour: set the 12 / 24H time format
Set Date Format: set the date format.
Backlight: allows you to set the time and brightness level of the display:
Timeout: set the time after which the display lowers the brightness without commands.
On Level: indicates the brightness level of the display when the device receives commands.
Dim Level: indicates the brightness level of the display when the appliance is inactive.
Inactive standby: set a time after which the radio turns off automatically (Off = off).
Language: allows you to select the system language.
Factory reset: allows you to restore all the settings to the factory settings. Select Yes for restore. SW version: software version installed.

DAB/DAB+ RADIO

Select the DAB (Digital radio) mode.
Press the TU-(5) and TU+(6) keys to display and scroll through the list of received radio stations. Press the SELECT button/knob (7) to select the desired station.
By pressing the INFO button (4) it is possible to change the display of information, if available, on the display.
By long pressing the PRESET key (3) it is possible to access the menu of the radio station being played in one of the 20 available memories.
By pressing the PRESET key (3) it is possible to scroll through the list of saved radio stations.

DAB/DAB+ TRANSMISSION INFORMATION
In DAB mode, the display will show a series of information about the station and the track being played.

Press the INFO button (4) repeatedly to change the information displayed.

Note : not all DAB stations provide the information displayed by the device.
If available, the following information is available:

DLS: displays information relating to the transmitted music (artist, song title, etc.).
Program type: displays information relating to the type of program transmitted.
Transmitter name: displays information relating to the service transmitter.
Transmitter Number/Frequency: displays information on the number and frequency of the transmitted DAB/DAB+ station.
Signal error index: displays information relating to the level of signal errors and the intensity with which it is received.
Bit Rate: displays information relating to the compression ratio of the current transmission.
Battery status.
Date: displays information relating to the date.

FM RADIO

Select the FM mode.
Press the TU- (5) and TU+ (6) keys to manually search for a radio station. Pressing the TUNE keys once, you make a shift of 0.05 MHz, pressing them for a long time you search until the first strong signal is encountered.
By pressing the PRESET key (3) you can access the list of stored FM radio stations. Select the desired radio station to listen to it.
By long pressing the PRESET key (3) it is possible to access the menu for saving the current radio station in one of the 20 available memories.
Repeatedly pressing the INFO button (4) will display various information regarding the tuned radio (if available).

To avoid possible hearing damage, limit the time listening at high volumes

Precautions for correct disposal of the product

The symbol shown on the equipment indicates that waste must be disposed of in “separate collection” and so the product must not be disposed of together with urban waste.
The user must take the product to special “separate waste collection centers” provided by the local government, or deliver it to the retailer against the purchase of a new product.
Separate collection of waste and subsequent treatment, recycling, and disposal operations promote the production of equipment with recycled materials and limit negative effects on the environment and on health caused by improper handling of waste.
Illegal disposal of the product leads to the enforcement of administrative penalties.

SIMPLIFIED EU DECLARATION OF CONFORMITY

Hereby TREVI Spa declares that the radio equipment type DAB 7F92 R complies with directive 2014/53/EU.
The full text of the EU declaration of Conformity is available at the following internet address:

https://www.trevi.it/dms/zidi/TREVI/DOCDAB7F92R.pdf
Strada Consolare Rimini-San Marino, 62 47924 Rimini (RN) Italy
Tel. 0541/756420 – Fax 0541/756430 – www.trevi.it –
e-mail: info@trevi.it
Made in China