Rockford Fosgate M5-1000X1 Jeep Wrangler JL Trim OEM Premium Audio Kit Instructions

Rockford Fosgate M5-1000X1 Jeep Wrangler JL Trim OEM Premium Audio Kit

Product Specifications:

• Model: M5-800X4, M5-1000X1
• Amplifiers Pre-Tuned: Yes
• Default Settings for M5-800X4:
  • Front Input: 12:05 O’Clock
• Default Settings for M5-1000X1:
  • Input: 01:30 O’Clock
  • Rear Input: 12:00 O’Clock
  • Preset: OFF
  • Punch EQ: MIN
  • Crossover: AP (All-Pass)
  • Crossover Frequency: 50Hz

Product Usage Instructions

Amplifier Settings Adjustment:
The amplifiers come pre-tuned for factory source units. If using an aftermarket source unit, follow the C.L.E.A.N. setup procedure to match the input level on both amplifiers to the aftermarket source unit.

Using the RF Connect App:
Download the RF Connect App for test tones and further instructions on optimizing your amplifier settings.

Base Radio Settings:
BALANCE/FADER: Start with both settings at the center position and adjust to your preference.

Radio Equalizer Settings:
Set LOW, MID, BASS to their centered position. Keep settings within -/+2 dB to prevent potential speaker damage.

Speed Volume Adjustment:
Set SPEED ADJUSTMENT VOLUME to OFF position to prevent potential speaker damage.

Premium Radio Settings:

• BALANCE/FADER: Start with both settings at the center position and adjust to your preference.
• Radio Equalizer Settings: Set LOW, MID, BASS to their centered position within -/+2 dB.
• Speed Volume Adjustment: Set SPEED ADJUSTMENT VOLUME to OFF position.

Frequently Asked Questions (FAQ):

• Q: How do I adjust the amplifier settings without voiding the warranty?
  A: The default amplifier settings are optimized for performance. Adjusting these settings may void your warranty. If using an aftermarket source unit, follow the C.L.E.A.N. setup procedure.

• Q: What should I do if I encounter speaker damage?
  A: Ensure that the LOW, MID, BASS settings are within -/+2 dB and that SPEED ADJUSTMENT VOLUME is set to OFF to prevent potential speaker damage.

AMPLIFIERS PRE-TUNED

NO ADJUSTMENT NECESSARY

• The amplifiers included in your kit are already configured for optimum performance with factory source units.
• No adjustment is needed unless using an aftermarket source unit. Please use our C.L.E.A.N. setup procedure to match the INPUT LEVEL on both amplifiers to the aftermarket source unit and leave the remaining amp settings as shown below. Download the “RF Connect” App for test tones & instructions.

M5-800X4

These are the default amplifier settings for the M5-800X4. Adjusting these settings will void your warranty.

M5-1000X1

These are the default amplifier settings for the M5-1000X1. Adjusting these settings will void your warranty.

BASE RADIO

• BALANCE/FADER
  

  • Start with BALANCE and FADER settings to center position, then adjust to your personal preference.

• EQUALIZER
  

  • Set LOW, MID, BASS to their centered position. Keep settings within -/+2 dB to prevent potential speaker damage.

• SPEED VOLUME
  

  • Set SPEED ADJUSTMENT VOLUME to OFF position to prevent potential speaker damage.

PREMIUM RADIO

• BALANCE/FADER
  • Start with BALANCE and FADER settings to center position, then adjust to your personal preference.
• EQUALIZER
  • Set LOW, MID, BASS to their centered position. Keep settings within -/+2 dB to prevent potential speaker damage.
• SPEED VOLUME
  • Set SPEED ADJUSTMENT VOLUME to OFF position to prevent potential speaker damage.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>