Shenzhen Jiakeyuan Industry SW-M1US Smart Wall Switch User Manual

Smart Wall Switch
User manual
SW-M1US, SW-M2US, SW-M3US

1. Install device

• Open the switch Panel
  Connect the wires screw in the screws cover the panel

Power Cord Connection

• Neutral wire is required
• Do not operate Installation with electricity
• Electric Shock Operate Carefully

Indicator Light Description Wi fi: Green Light

On: Blue Light
Off: Red Light

2. Download and install “SmartLife” App.

• App is free
  ScanQR code or IOS Android Google play Store http://smartapp.tuya.com/smartlife

Smart Lifr App

.
3. Register Account

• Click Register
• Choose Location
• Fill in your phone num or email for a verification code

4 Add New Device

• Click Add Device
• Choose Device and Click Switch

5. Device Connection Network

• Power on the device and confirm that indicator light rapidly blinks
• Reset method Press and hold any ON-OFF button for 5 seconds or continuously Power on and Power off 3 times until the indicator light goes ut.

6. Device Connection WI FI

• Enter WI FI password
• Only 2 4Ghz WI FI networks are supported

7. Device Connection WI FI Complete

• you can control your device by phone now

.
8. About Timer and Coundown and Schedule

• You can automatically ON OFF the device at any time via timer and countdownand Schedule.
• You can schedule all the devices

.
9. About Scenario and Automation in Smart

• With scene settings, you can control multiple devices simultaneously. e gone click to turn on the TV air conditioning living room lights and curtains when you get home from work.
  .

Select Action
Enable or Disable Automation
Time-lapse
Device
With automation settings, you can automate the work of your devices based on weather temperature PM values, and more

Select Condition

Temperature| Uumidity
Weath| Pm2 5.
Air Quality| Sunset Sunrise
Schedule| Ddvice

10. About Me→ Family Mana gement→ my home→ Family→ Members Add Member (enter smartlife account)

• Here you can control the device with your family

11. About AI Speaker Voice Commands

• Amazon Alexa
  Me→ More Services→ Alexa→ Connect to Alexa→

• Google Assistant
  Me→ More Services→ Google Assistant

• IFTTT
  Me→ More Services→ FTTT→

FCC STATEMENT

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
• The distance between user and products should be no less than 20cm

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>