TRADE WAREHOUSE 845-031SR Metal Garden Sheds Installation Guide

August 23, 2024
TRADE WAREHOUSE

TRADE WAREHOUSE 845-031SR Metal Garden Sheds

Product Specifications:

  • Model : IN220901152VU0S3_CGAL
  • Tools Recommended : D1, W1, D2, W2, P4A, W3, P1A, P4B, P2, P3, P5, P6, P7, P8, 3L, 3R, 5, 13, 14, 19, B1, B2, B3, K, DX1, DX2

Product Usage Instructions

Tools Setup:

  1. Identify and gather all the tools recommended as listed in the user manual.
  2. Organize the tools based on the provided part numbers and quantities.
  3. Ensure you have all the necessary components before starting the assembly process.

Assembly Process:

  1. Start by assembling components from BOX 1/3 following the order of parts listed.
  2. Continue with components from BOX 2/3 and finally proceed to components from BOX 3/3.
  3. Refer to the part numbers and quantities to correctly assemble each section.

Dear customer,
Thank you for purchasing this product. So that your appliance serves you well, please read all the instructions in this user’s manual. If you have any questions, please contact our customer care center, Our contact details are below:

ASSEMBLY PREPARATION

Please check local building codes regarding footings, location, and other requirements before beginning construction. Study and understand this owner’s manual of important information and helpful tips for easier and more enjoyable assembly.

Assembly instructions:
Reviewing all instructions and the appropriate information before you begin, make sure to follow the step sequence carefully for successful results.

Flooring base:

  • The site must be prepared so that the base of the shed is level all around and checking with a spirit level is required.
  • The base can be constructed with treated timber or concrete, in order to stop the moisture from getting into the shed, The shed is not designed to be built onto lawn directly. Also the ground will get muddy during rainy days.
  • If a concrete pad is made, it is important that this slopes toward the edges to prevent water ingress. Time must be allowed for any concrete or cement to dry before building the shed on top.
  • Bases can also be constructed from bricks, blocks, or mounted on a concrete pad.
  • The bricks or blocks should be cemented onto firm and level concrete footings and the greenhouse frame drilled and screwed to the base.

**Parts and Parts List

**

Before you start, separate and identify all the parts and hardware to be sure that you have all the necessary parts for your building (refer to the Parts List Page). Do not attempt to assemble the building if parts are missing because any building left partially assembled may be seriously damaged by light winds.

Safety must be put in the No. 1 position:

  1. Select a dry and calm day for your assembly. Team works ( Two or more people ) are required during the assembly;
  2. Wearing safety gloves, eye protection and long sleeves during the assembly to prevent injury; Pay attention to the sharp edge of some parts;
  3. Children and pets are not allowed to enter the construction site;
  4. Never concentrate your total weight on the roof of the building. When using a step ladder make sure that it is safe;

Care & Maintenance

  1. Keep the shed clean with a soft cloth, use water if necessary;
  2. Keep the door tracks clear of dirt and other stuff that prevents them from sliding easily.
  3. Clean the snow with the necessary tools to make sure it is safe to enter; Heavy snow may cause collapse, so please make sure safety before entering into.
  4. The shed is not made for living but for storing stuff.

NOTICE : If there is slight bending on the corners

  1. Pls wear gloves and stretch the corners slightly until they are flat
  2. Then the sheets will be normal and there is no affection to the assembling

Imported by Aosom LLC
27150 SW Kinsman Rd Wilsonville, OR 97070 USA

MADE IN CHINA

FAQ

Q: What should I do if I’m missing a part?
A: In case of missing parts, please contact our customer support for assistance in acquiring the necessary components.

Q: How do I ensure proper tool maintenance?
A: Clean and store your tools properly after use. Regularly inspect for any damage and replace worn-out tools to ensure smooth operation.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals