ALMOST HEAVEN SAUNAS L Heater Fence Instructions
- August 22, 2024
- ALMOST HEAVEN SAUNAS
Table of Contents
ALMOST HEAVEN SAUNAS L Heater Fence
Specifications
- Product Name: L Heater Fence Assembly
- Safety Information: Follow safety instructions in the manual to avoid serious injury or death
- Installation Requirements: Refer to local building codes for specific requirements
- Electrical Work: Must be completed by a licensed electrician
- Recommended for use with a sauna and/or heater
IMPORTANT SAFETY INSTRUCTIONS
DANGER: Indicates a hazardous situation that, if not avoided, will result
in death or serious injury.
WARNING: Indicates a hazardous situation that, if not avoided, could
result in death or serious injury.
CAUTION: Indicates a hazardous situation that, if not avoided, could
result in minor or moderate injury.
NOTICE : Indicates information considered important, but not hazard-
related.
FOLLOW THE SAFETY INFORMATION IN THIS DOCUMENT TO AVOID SERIOUS INJURY OR DEATH REFER TO YOUR LOCAL BUILDING CODES FOR ANY SPECIFIC INSTALLATION REQUIREMENTS ALL ELECTRICAL WORK NEEDS TO BE COMPLETED BY A LICENSED ELECTRICIAN. FAILURE TO DO SO COULD CAUSE INJURY OR DAMAGE TO THE HEATER. KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE REFERENCE SAUNA AND/OR HEATER MANUALS FOR FURTHER SAFETY INFORMATION.
Heater Fence Assembly
- Do not install the heater fence while the heater is running or hot.
- The outside of the heater is very hot and will cause burns if touched.
Step 1: Preparation
Refer to the safety instructions in the manual before starting the assembly process. Ensure you have all the necessary components from your sauna hardware kit. The heater fence kit will come banded in stretch wrap, remove the wrap and place the two pieces on your working surface. Match the two pieces as shown below.
Step 2: Assembly of Fence
Turn over matched pieces so the long section is face down. Ensure the boards are flush in the top corner for optimal fitment. Attach the two pieces using the two predrilled holes and remaining screws from your sauna hardware kit. It is recommended to keep pressure on the two square boards during fastening for easier assembly.
Step 3: Installation of Fence
To install the heater fence into a sauna, use the four predrilled holes and screws from the sauna hardware kit. Place a fence around the heater and fasten to the side and front wall panels.
Frequently Asked Questions
Q: Can I install the heater fence without professional help?
A: No, all electrical work must be completed by a licensed electrician to
avoid any risk of injury or damage to the heater.
Q: What should I do if I encounter difficulties during assembly?
A: Refer to the manual for troubleshooting tips or contact customer support
for assistance.